Publications

 

Show/hide contentOpenClose All

  1. Fang F. Z., 2016, Atomic and close-to-atomic scale manufacturing (Invited lecture), International Symposium on Future-Oriented Machining 2016 (FORM 2016), Tokyo, Japan, November 21.
  2. Fang F. Z., 2016, High precision manufacturing of complex surfaces (Keynote speech), 2016 International Forum on Advanced Manufacturing Technology and Equipment, Chengdu, China, November 4.
  3. Fang F. Z., 2016, Manufacturing of Micro Optics (Keynote speech), The 5th Asia Pacific Conference on Optics Manufacture, Shanghai, China, October 30 – November 2.
  4. Fang F. Z., 2016, Advanced Optical Manufacturing Technology (Invited seminar), Hefei Livermore Instruments Co. Ltd., Hefei, China, October 21.
  5. Fang F. Z., 2016, Development and application of nano manufacturing (Keynote speech), Eastern Forum of Science and Technology, Shanghai, China, October 19.
  6. Fang F. Z., 2016, Advance in optical manufacturing (Invited lecture), Qinghe Forum of Shanghai Institute of Optics and Fine Mechanics Chinese Academy of Science, Shanghai, China, June 30.
  7. Fang F. Z., 2016, Manufacturing 3.0 (Keynote speech), The 9th International Conference on Digital Enterprise Technology (DET2016), Nanjing, China, March 29-31.
  1. Fang F. Z., 2015, The key technology of intelligent manufacturing and strategic choice of the enterprises (Keynote speech), Forum of Industry 4.0 and Manufacturing 2025, Tianjin, November 27.
  2. Fang F. Z., 2015, Nanomanufacturing: challenges and opportunities (Keynote speech), The 13th International Conference on Automation Technology, Taiwan, November 13-15.
  3. Fang F. Z., 2015, Low temperature and ultrasonic assisted carbon steel cutting and the progress (Invited lecture), Taishan Academic Forum—high efficiency energy and material saving manufacturing, Zibo, Shangdong, September 18-20.
  4. Fang F. Z., 2015, Manufacturing 3.0 - addressing the manufacturing development trend (Invited lecture), Brunel University London, UK, September 7.
  5. Fang F. Z., 2015, Nanomanufacturing-challenges and opportunities (Invited lecture), The 2nd ISNM Summer School-Precision Metrology and Instrumentation for Micro/Nano-manufacturing, Hongkong, July 13-18.
  6. Fang F. Z., 2015, Ultra-precision machining of brittle materials and carbon steel (Keynote Speech), The 13th Conference on Machining and Advanced Manufacturing Technology, Taiyuan, May 22-24.
  7. Fang F. Z., 2015, Machining and measurement of aspheric and freeform optical elements (Invited lecture), Applied Optics and Photonics China (AOPC2015), Beijing, China, May 5-7.
  8. Fang F. Z., 2015, Micro machining technologies (Invited lecture), University of Brescia, Italy, April 3.
  9. Fang F. Z., 2015, Manufacturing and measurement of freeform optics (Keynote speech), International Conference on Optical and Photonic Engineering (icOPEN2015), Singapore, April 14-16.
  10. Fang F. Z., 2015, Nanomanufacturing: perspectives and applications (Keynote speech), 4M/ICOMM 2015 Conference, Milan, Italy, March 31- April 2.
  11. Fang F. Z., 2015, Advances in Nano Mechanical Machining (Keynote speech), The 38th International MATADOR Conference, Huwei, Taiwan, March 27-April 1.
  12. Fang F. Z., 2015, Nanometric cutting mechanism (Keynote speech), The 8th Manufacturing Institute for Research on Advanced Initiatives (MIRAI-2015), Kaohsiung, Taiwan , March 25-26.
  1. Fang F. Z., 2014, Manufacturing 3.0 (Keynote speech), Precision Machining Workshop across the Taiwan Straits, Guangzhou, Guangdong, December 18-21.
  2. Fang F. Z., 2014, Manufacturing 3.0 (Invited lecture), University College Dublin, Dublin, Ireland, November 11.
  3. Fang F. Z., 2014, Manufacture and measurement of freeform surface (Invited lecture), Young Researchers’ Measuring and Testing Technology Forum Supported by NSFC, Tianjin, October 24-26.
  4. Fang F. Z., 2014, High precision machining of complex surfaces (Keynote speech), The 10th CHINA-JAPAN International Conference on Ultra- Precision Machining Process(CJUMP), Jiaozuo, Henan, October 18-19.
  5. Fang F. Z., 2014, The high precision manufacturing technology of complex surface (Invited speech), Manufacturing Technology Seminar across the Taiwan Straits Supported by NSFC, Yinchuan, September 24-28.
  6. Fang F. Z., 2014, Manufacturing of freeform optics (Invited speech), ASPEN/ASPE Summer Conference on Freeform Optics, Hawaii, USA, June 26-28.
  7. Fang F. Z., 2014, Nanomanufacturing perspective (Invited presentation), NanoTrends2014, Nanjing, China, May 23-25.
  8. Fang F. Z., 2014, Nano machining technology (Invited presentation), The 7th MIRAI Conference on Nanofabrication and Green Technology, Wako, Japan, March 27-28. 
  9. Fang F. Z., 2014, Freeform optics and applications (Plenary speech), The 25th Conference on Real and Virtual Manufacturing, Wroclaw, Poland, March 9-11.
  10. Fang F. Z., 2014, Evaluation of freeform lenses (Invited lecture), MAFO – The Conference, Milan, Italy, February 27-28. 
  1. Fang F. Z., 2013, Fabrication of nano optics (Invited presentation), Asian Symposium on Precision Engineering and Nanotechnology (ASPEN2013), Taipei, Taiwan, China, November 12-15.
  2. Fang F. Z., 2013, Manufacturing of freeform optics (Invited speech), National Chung Cheng University, Chiayi, Taiwan, November 15.
  3. Fang F. Z., 2013, Nanomanufacturing: perspective and applications (Invited speech), Taiwan University, Taipei, November 11.
  4. Fang F. Z., 2013, Manufacturing of freeform optics (Keynote speech), The 15th International Manufacturing Conference in China (IMCC), Nanjing, China, October 16-18.
  5. Fang F. Z., 2013, Development in micro machining technology (Invited presentation), Symposium on Precision Manufacturing, Changzhou, China, September 26-28.
  6. Fang F. Z., 2013, Ultrasonic assisted machining (Keynote speech), Symposium on Precision Micro Manufacturing, Taian, China, September 20-23.
  7. Fang F. Z., 2013, Advanced optical manufacturing (Keynote speech), International Conference on Optics, Shenzhen, China, September 5-6.
  8. Fang F. Z., 2013, Machining of micro/nano optical elements (Keynote speech), PhD. Candidates Symposium of Instrumentation and Bio-engineering, Beijing, China, September 1-2.
  9. Fang F. Z., Zhang X. D, Weckenmann A., Zhang G., Evans, C., 2013, Manufacturing and measurement of freeform optics (Keynote paper), The 62nd CIRP General Assembly, Copenhagen, Denmark, August 18-24.
  10. Fang F. Z., 2013, High precision complex form machining (Keynote speech), Symposium of Manufacturing Frontiers, Beijing, China, July 26-28.
  1. Fang F. Z., 2012, Advances in nano mechanical machining (Invited presentation), The 10th International Conference on Frontiers of Design and Manufacturing (ICFDM2012), Chongqing, China, June 10-12.
  2. Fang F. Z., 2012, Development of freeform machining (Keynote speech), International Symposium on Micro/nano Mechanical Machining and manufacturing (ISMNM), Matsushima, Japan, April 18-20.
  3. Fang F. Z., 2012, Fabrication of nano optics (Plenary speech), The 6th SPIE International Symposium on Advanced Optical Manufacturing and Testing Technologies (AOMATT2012), Xiamen, China, April 26-29.
  4. Fang F. Z., 2012, Advances in freeform optics (Invited presentation), Carl Zeiss Vision, Aalen, Germany, March 15
  5. Fang F. Z., 2012, Advances in freeform optics (Invited presentation), Ophthalmic Labs & Industry (MAFO), Milan, Italy, March 10-11.
  1. Fang F. Z., 2011, Fabrication of nano optics (Invited speech), The Asia Conference on Precision Engineering and Nanotechnology (ASPEN2011), Hong Kong, China, November 15-18.
  2. Fang F. Z., 2011, Nano scale fabrication of optical elements, The 8th National Conference on Precision Engineering, Tianjin, China, October 14-16.
  3. Fang F. Z., 2011, Manufacturing of freeform optics (Keynote speech), The 14th International Manufacturing Conference in China (IMCC2011), Tianjin China, October 13-15.
  4. Fang F. Z., 2011, Machining mechanism at multi-scale (Keynote speech), The 1st Forum on Trends in Nano-Manufacturing (NanoTrends2011), Hefei, China, October 9-12.
  5. Fang F. Z., 2011, Manufacturing of freeform optics (Keynote speech), Ophthalmic Optics Forum, Beijing, China, September 13.
  6. Fang F. Z., 2011, Development in manufacturing of freeform optics (Plenary speech), The 1st International Conference on Manipulation, Manufacturing and Measurement on the Nanoscale (3M-Nano), Changchun, China, August 29-September 2.
  7. Fang F. Z., 2011, Advances in manufacturing (Invited speech), National Chung Hsing University, Taiwan, China, February 25.
  8. Fang F. Z., 2011, Freeform optics and development (Invited speech), Metal Industries R&D Centre, Taiwan, China, February 24.
  9. Fang F. Z., 2011, Advances in nano fabrication (Invited seminar), Institute of Experimental Physics, Johannes Kepler University Linz, Austria, February 4.
  10. Fang F. Z., 2011, Advances in manufacturing (Invited seminar), QFM University of Erlangen-Nuremberg, Erlangen, Germany, January 31.
  1. Fang F. Z., 2010, Trends of manufacturing development (Plenary speech), PEI General Assembly, Jinan, China, December 12-16.
  2. Fang F. Z., 2010, Machining of freeform optics (Plenary speech), OSA-IEEE-COS Topical Meeting on Advances in Optoelectronics and Micro/nano-optics, Guangzhou, China, December 3-6.
  3. Fang F. Z., 2010, Mechanical processes for micro-optics (Invited presentation), SPIE – Phonics Europe, Brussels, Belgium, April 12-16.
  1. Fang F. Z., 2009, Nano mask fabrication based on focused ion beam milling (Invited presentation), Asia Symposium for Precision Engineering and Nanotechnology (ASPEN2009), Kitakyushu, Japan, November 11-13.
  2. Fang F. Z., 2009, Advances in micro/nano fabrication (Invited presentation), The 3rd MIRAL International Conference – Micro Fabrication and Green Manufacturing, Incheon, Korea, October 14-16.
  3. Fang F. Z., 2009, Development in nanomanufacturing (Invited presentation), Singapore Institute of Manufacturing Technology, Singapore, November 3.
  4. Fang F. Z., 2009, Inspection of high aspect ratio features (Invited presentation), School of Mechanical and Aerospace Engineering, Nanyang Technological University, Singapore, November 4.
  5. Fang F. Z., 2009, Manufacturing in nanometric accuracy (Invited presentation), The 2nd NSFC-NSF Joint Symposium on Nanomanufacturing, Nebraska, USA, October 19-20.
  6. Fang F. Z., 2009, Functional surfaces fabrication (Keynote presentation), The 1st International Conference on Surface and Interface Fabrication Technologies, Wako, Japan, July 16-17.
  7. Fang F. Z., 2009, Advances in micro/nano machining (Keynote presentation), The 1st International Symposium on Atomically Controlled Fabrication Technology, Osaka, Japan, February 16-17.
  1. Fang F. Z., Xu Z. W., 2008, Nanometrology for high aspect ratio features using nanotube (Invited presentation), International Conference on Precision Measurement (ICPM2008), Ilmenau, Germany, September 8-12.
  2. Jin G. F., Fang F. Z., 2008, Freeform optics (Keynote speech), The 1st International Conference on Nanomanufacturing (nanoMan2008), Singapore, July 13-16.
  3. Fang F. Z., Zhang X. D., 2008, Freeform machining technology, International Symposium on Functional Surface Machining (Keynote speech), Bremen, Germany, June 18-20.
  4. Fang F. Z., 2008, Advances in freeform machining (Invited presentation), The 3rd International Symposium on Micro/nano manufacturing, Taiwan, April 26-28.
  5. Zhang X. D., Fang F. Z., 2008, Machining and simulation of sinusoidal surfaces using cylindrical coordinate method (Invited paper), The 1st International Conference on Nanomanufacturing (nanoMan2008), Singapore, July 13-16.
  1. Fang F. Z., 2007, Freeform machining of optics: from concept to reality (Keynote speech), Asia Symposium for Precision Engineering and Nanotechnology (ASPEN2007), Korea, November 6-9.
  2. Fang F. Z., 2007, Advances in ultra-precision machining of optical components (Keynote speech), Asia Pacific Conference on Optics Manufacture (APCOM2007), Hongkong, January 11-13.
  1. Fang F. Z., 2006, Advances in micro/nano machining (Invited presentation), Hong Kong Polytechnic University, June 8.
  2. Fang F. Z., 2006, Advances in micro/nano manufacturing (Keynote speech), International Conference on Micro/Nano Fabrication Technology, Bangkok, Thailand, May 10-12.
  1. Fang F. Z., 2005, Fundamentals in micro machining (Invited presentation), Nagoya University, Japan, October 14.
  2. Fang F. Z., 2005, Brittle-to-ductile transition in single crystal silicon (Keynote speech), TMMF2005, Tsukuba, Japan, October 17.
  3. Fang F. Z., 2005, Micro machining of optical and bio-medical parts (Invited presentation), Technological University of Malaysia, Malaysia, February 23.
  1. Fang F. Z., 2004, Micro machining technology (Invited presentation), Georgia Institute of Technology, USA, June 9.
  2. Lee L. C., Fang F. Z., Liu X. D., Thoe, T. B., Ding, X., 2004, Machining technology associated with the changing face manufacturing (Keynote paper), The International Conference on Manufacturing & Management -2004 (GCMM 2004) , Vellore, India, December 8-10.
  3. Fang F. Z., 2004, Tool-based micromachining technologies (Keynote speech), Workshop in Advanced Manufacturing Technology, Atlanta, USA, June 7-9.
  1. Fang F. Z., 2003, Micro machining technologies (Invited presentation), MTA2003 International Technical Forum, Singapore, June 21.
  2. Fang F. Z., 2003, Micro machining of optical and bio components (Invited presentation), Tsinghua University, China, September 18.
  3. Fang F. Z., 2003, Development of micro machining (Invited presentation), Beijing University of Aeronautics and Astronautics, China, September 19.
  4. Lee L. C., Fang F. Z., Huang H., Kanno S., Liu X. D., Mai T. A., Ramesh K., 2003, Addressing the ubiquitous burrs (Keynote paper), The 3rd Asia-Pacific Forum on Precision Surface Finishing and Deburring Technology, Melbourne, Australia, November 4.
  5. Fang F. Z., 2003, Micro fabrication processes (Invited presentation), Seminar at National University of Singapore, Singapore, February 21.
  6. Fang F. Z., 2003, High speed machining technology (Invited presentation), Workshop Jointly Organized by NUS and JSME, Singapore, February 26-27.
  7. Fang F. Z., Liu X. D., Lee, L. C., 2003, Micro machining of optical glasses (Invited paper), Sadhana – Academy Proceedings in Engineering Sciences, May 1.
  1. Fang F. Z., 2001, Cutting of hardened steels (Keynote speech), The International Conference on Advanced Manufacturing Technology (ICAMT2001), Nanjing, China, September 10.
  2. Fang F. Z., 2001, Hardened steel machining (Invited presentation), Gintic (Singapore)-Georgia Tech (USA) Joint Workshops on Manufacturing Technology, Singapore, June 30.
  1. Fang F. Z., 2000, Ultra-precision machining of brittle materials (Invited presentation), Tianjin University, China, June 10.
  1. Xu, Zongwei; Wang, Liyang; Fang, Fengzhou; Fu, Yongqi; Yin, Zhen, A Review on Colloidal Self-Assembly and their Applications. Current Nanoscience. 2016; 12(6): 725-746.
  2. Fang F. Z.*, Atomic and close-to-atomic scale manufacturing—A trend in manufacturing development, Frontiers of Mechanical Engineering. 2016; 11(4): 325-327
  3. Qiu Z. J., Liu C. C., Wang H. R., Yang X., Fang F. Z., Crack propagation and the material removal mechanism of glass-ceramics by the scratch test, Journal of The Mechanical Behavior of Biomedical Materials. 2016; 64: 75-85.
  4. Fang F. Z.*, Zhang N., Zhang X. D. Precision injection molding of freeform optics. Advanced Optical Technologies. 2016; 5(4): 303–324.
  5. Gao W. L., Yang B., Lawrence M., Fang F. Z., Beri B., Zhang S. Photonic Weyl degeneracies in magnetized plasma. Nature Communication. 2016; 7:12435. 
  6. Song L., Zheng Y. L., Hu G., Ma J. Y., Werner T., Zhao M. R., Fang F. Z., Highly sensitive, precise, and traceable measurement of force. Instrumentation Science & Technology. 2016; 44: 386-390.
  7. Fang F. Z.*, Zeng Z., Zhang X. D., Jiang L. L., Measurement of micro-V-groove dihedral using white light interferometry. Optics Communications. 2016; 359: 297-303.
  8. Liu X. L., Zhang X. D., Fang F. Z.*, Identification and compensation of main machining errors on surface form accuracy in ultra-precision diamond turning. International Journal of Machine Tools & Manufacture. 2016; 105: 45-57.
  9. Wang Y., Gong H., Fang F. Z., Ni H., Kinematic view of the cutting mechanism of rotary ultrasonic machining by using spiral cutting tools. International Journal of Advanced Manufacturing Technology. 2016; 83(1): 461-74.
  10. Li C., Fu C. H., Guo Y. B., Fang F. Z., A multiscale modeling approach for fast prediction of part distortion in selective laser melting. Journal of Materials Processing Technology. 2016; 229: 703-712.
  11. Pang K., Song L., Fang F. Z.*, Zhang Y., Zhang H. Y. An imaging system with a large depth of field based on an overlapped micro-lens array. CIRP Annals - Manufacturing Technology. 2016. 
  12. Zhu P. Z., Fang F. Z. Study of the minimum depth of material removal in nanoscale mechanical machining of single crystalline copper. Computational Materials Science. 2016; 118: 192-202.
  13. Wang J. S., Zhang X. D.*, Fang F. Z*. Molecular dynamics study on nanometric cutting of ion implanted silicon. Computational Materials Science. 2016; 117: 240-50.
  14. Brieussel A., Shen Y., Campbell G., Guccione G., Janousek J., Hage B., Buchler B. C., Treps N., Fabre C., Fang F. Z., Li X. Y., Symul T., Lam P.K. Squeezed light from a diamond-turned monolithic cavity. Optics Express. 2016; 24(4): 4042-56.
  15. 15. Wang Z. Q., Gong H., Fang F. Z., Liu B., Recognition of wear condition of micro milling tool based on length fractal dimension, Journal of Vibration, Measurement and Diagnosis. 2016; 36(3): 592-7.(in Chinese)
  16. Tian F., Liu X. L., Zhang X. D., Fang F. Z.*, Influence of manufacture error on optical performance of micro lens array, Acta Optica Sinica. 2016; 36(2).(in Chinese)
  17. Duan W., Gong H., Wang Y., Fang F. Z., Rotary ultrasonic machine of pre-stressed holes in optical fiber preforms, Nanotechnology and Precision Engineering. 2016.14(2). (in Chinese)
  18. Dong J. C., Gong H., Zeng Q. Y., Wang Y., Duan W., Fang F. Z., Measurement of transient cutting temperature in ultra-precision turning based on thin-film thermocouple, Nanotechnology and Precision Engineering, 2016; 14(2).
  19. Liu L. P., Lin B., Fang F. Z., Design and experimental study of an air bearing workbench for rotary ultrasonic drilling, Machinery Design and Manufacture. 2016; 9: 108-110.(in Chinese)
  1. Xiao Y. J., Fang F. Z.*, Xu Z. W., Hu X. T. Annealing recovery of nanoscale silicon surface damage caused by Ga focused ion beam. Applied Surface Science. 2015; 343: 56-69.
  2. Fang F. Z.*, Liu B., Xu Z. W. Nanometric cutting in a scanning electron microscope. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology. 2015; 41: 145-52.
  3. Chen W. H., Zhang X. D., Liu X. L., Fang F. Z. Optical design and simulation of a compact multi-aperture camera based on a freeform microlens array. Optics Communications. 2015; 338: 300-6.
  4. Zheng Y. L., Song L., Hu G., Cai X., Liu H. G., Ma J. Y., Zhao M. R., Fang F. Z. The multi-position calibration of the stiffness for atomic-force microscope cantilevers based on vibration. Measurement Science & Technology. 2015; 26(5).
  5. Gong H., Wang Y., Song L., Fang F. Z. Spiral tool path generation for diamond turning optical freeform surfaces of quasi-revolution. Computer-Aided Design. 2015; 59: 15-22.
  6. Wang J. S., Fang F. Z.*, Zhang X. D. An experimental study of cutting performance on monocrystalline germanium after ion implantation. Precision Engineering-Journal of the International Societies for Precision Engineering and Nanotechnology. 2015; 39: 220-3.
  7. Gao W. L., Fang F. Z., Liu Y. M., Zhang S. Chiral surface waves supported by biaxial hyperbolic metamaterials. Light-Science & Applications. 2015; 4: e308.
  8. Gao W. L., Lawrence M., Yang B. A., Liu F., Fang F. Z., Beri B., Li J. S., Zhang S. Topological Photonic Phase in Chiral Hyperbolic Metamaterials. Physical Review Letters. 2015; 114(3).
  9. Fang F. Z.*, Xu F. F., Lai M. Size effect in material removal by cutting at nano scale. International Journal of Advanced Manufacturing Technology. 2015; 80(1-4): 591-8.
  10. Huang K. T., Gong H., Fang F. Z., Li Z. Generation of spherical non-uniform rational basis spline curves and its application in five-axis machining. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture. 2015; 229(7): 1104-17.
  11. Liu X. L., Zhang X. D., Fang F. Z.*, Zeng Z., Gao H. M., Hu X. T. Influence of machining errors on form errors of microlens arrays in ultra-precision turning. International Journal of Machine Tools & Manufacture. 2015; 96: 80-93.
  12. Qiu Z. J., Yang X., Zheng H., Gao S., Fang F. Z. Investigation of micro-injection molding based on longitudinal ultrasonic vibration core. Applied Optics. 2015; 54(28): 8399-405.
  13. Wang J., Fu Y. Q., Xu Z. W., Fang F. Z. Near-field visualization of plasmonic lenses: an overall analysis of characterization errors. Beilstein Journal of Nanotechnology. 2015; 6: 2069-77.
  14. Wang Z. Q., Fang F. Z., Liu B., Wang Z. Y. An experimental method for eliminating effect of rigid out-of-plane motion on 2D-DIC. Optics and Lasers in Engineering. 2015; 73: 137-42.
  15. Yu J., Fang F. Z.*, Qiu Z. J. Aberrations measurement of freeform spectacle lenses based on Hartmann wavefront technology. Applied Optics. 2015; 54(5): 986-94.
  16. Han Q., Fu Y. Q., Jin L., Zhao J. J., Xu Z. W., Fang F. Z., Gao J. S., Yu W. X. Germanium nanopyramid arrays showing near-100% absorption in the visible regime. Nano Research. 2015; 8(7): 2216-22.
  17. Hu X.T., Xu Z. W.*, Li K., Fang F. Z.*, Wang L. Y. Fabrication of an Au-polystyrene sphere substrate with three-dimensional nanofeatures for surface-enhanced Raman spectroscopy. Applied Surface Science. 2015; 355: 1168-74.
  18. Liu B., Fang F. Z.*, Xu Z. W., Zhang X. D. Design of five-axis ultrasonic assistant compound machine tool. Transactions of Tianjin University. 2015; 21(4): 312-6.
  19. Wang Z. Q., Gong H., Fang F. Z. Micro hole machining using double helix electrodes in electro discharge machining. Journal of Central South University (Science and Technology). 2015; 46(8): 2857-62.(in Chinese)
  20. Zhang N., Srivastava A., Kirwan B., Byrne R., Fang F. Z., Browne D. J., Gilchrist M. D. Manufacturing microstructured tool inserts for the production of polymeric microfluidic devices. Journal of Micromechanics and Microengineering. 2015; 25(9).
  21. Zhang X. D., Zeng Z., Liu X. L., Fang F. Z.* Compensation strategy for machining optical freeform surfaces by the combined on- and offmachine measurement. Optics Express. 2015; 23(19): 24800-10.
  22. Pan L., Gong H., Fang F. Z. Ultra-precision polishing process of large freeform surface aluminum mirror, Nanotechnology and Precision Engineering, 2015; 13(2): 108-12.(in Chinese)
  23. Fang F. Z. “Manufacturing 3.0” is the strategic choice for manufacturing development. People's Forum. 2015; 0(16): 59-61.(In Chinese)
  24. Chai Z. Y., Wang Q. C., Zeng Z., Zhang X. D., Fang F. Z. Generation of optical vortex array using a wedge array. Acta Photonica Sinica. 2015; 0(4): 71-5.(in Chinese)
  25. Fang F. Z., Zhang H. Y., Song L., Pang K., Zhang Y. Development of fabrication and application of artificial compound eye system. Nanotechnology and Precision Engineering. 2015; 13(6):434-42. (in Chinese)
  1. Cheng Y., Fang F. Z.*, Zhang X. D. Design of an ultra-small aspect ratio concentrator. Optical Engineering. 2014; 53(11).
  2. Fang F. Z., Huang K. T., Gong H, Li Z. J. Study on the optical reflection characteristics of surface micro-morphology generated by ultra-precision diamond turning. Optics and Lasers in Engineering. 2014; 62: 46-56.
  3. Gao H. M., Fang F. Z., Zhang X. D. Reverse analysis on the geometric errors of ultra-precision machine. International Journal of Advanced Manufacturing Technology. 2014; 73(9-12): 1615-24.
  4. Nie Y. H., Fang F. Z.*, Zhang X. D. System design of Maxwell force driving fast tool servos based on model analysis. International Journal of Advanced Manufacturing Technology. 2014; 72(1-4): 25-32.
  5. Qiu C., Zhu P. Z., Fang F. Z.*, Yuan D. D. Shen X. C. Study of nanoindentation behavior of amorphous alloy using molecular dynamics. Applied Surface Science. 2014; 305: 101-10.
  6. Wu W., Xu Z. W., Fang F. Z.*, Liu B., Xiao Y. J. Chen J. P., Wang X. B., Liu H. Z. Decrease of FIB-induced lateral damage for diamond tool used in nano cutting. Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms. 2014; 330: 91-8.
  7. Yu J., Qiu Z. J., Fang F. Z. Mathematical description and measurement of refractive parameters of freeform spectacle lenses. Applied Optics. 2014; 53(22): 4914-21.
  8. Chen Y., Han H., Fang F. Z.*, Hu X. T. MD simulation of nanometric cutting of copper with and without water lubrication. Science China-Technological Sciences. 2014; 57(6): 1154-9.
  9. Zhu P. Z., Qiu C., Fang F. Z.*, Yuan D. D., Shen X. C. Molecular dynamics simulations of nanometric cutting mechanisms of amorphous alloy. Applied Surface Science. 2014; 317: 432-42.
  10. ZhengY. L., Song L., Hu G., Zhao M. R., Tian Y. L., Zhang Z. H., Fang F. Z. Improving environmental noise suppression for micronewton force sensing based on electrostatic by injecting air damping. Review of Scientific Instruments. 2014; 85(5).
  11. Zhu P. Z., Fang F. Z.* On the mechanism of material removal in nanometric cutting of metallic glass. Applied Physics A-Materials Science & Processing. 2014; 116(2): 605-10.
  12. Chen Y. H., Fang F. Z.*, Zhang X. D., Hu X. T. Molecular dynamics of nanometric processing of ion implanted monocrystalline silicon surfaces. Transactions of Tianjin University. 2014; 20(3): 203-9.
  13. Fang F. Z., Wan Y. Three-dimensional displacement measurement system based on optical free-form surface. Transactions of Tianjin University. 2014; 47(10): 934-42. (in Chinese)
  14. Li Z. J., Fang F. Z., Gong H. Molecular dynamics simulation of physical effect of water in nanometric cutting. Transactions of Tianjin University, 2014; 47(12): 1109-14.(in Chinese)
  15. Li Z. J., Gong H, Tong W. P., Fang F. Z., Yang C. Experimental study of diamond turnability of iron nitride. Transactions of Tianjin University. 2014; 47(9): 785-9.(in Chinese)
  16. Xing X. D., Xu Z. W., Gao H. F., Fang F. Z.*, Liu B. Study on ringing artefacts of carbon nanotube probes of atomic forcemicroscopy. International Journal of Nanomanufacturing. 2014; 10(3): 215-28.
  17. Zhang Q., Fang F. Z.*, Xu Z. W., Gao T. T., Gao W. L. A novel method for SERS active substrates based on Au/PDMS self-assembled nanocracks. Special Issue on Precision Engineering and Nanotechnology. 2014; 404-14. 
  18. Fang F. Z., Zhang X. D. Nanocutting theory and key technologies. China Academic Journal Electronics. 2014; (5): 357-9.(in Chinese)
  19. Fang F. Z. Nanomanufacturing research and progress. China Basic Science. 2014; 16(5): 9-15.(in Chinese)
  20. Fang F. Z., Lai M. Nanocutting techonology and progress. Science China. 2014; (10): 1052-70.(in Chinese)
  21. Zhang X., Song L., Zhang S. S., Fang F. Z. The method for the calibration and measurement of bionic compound-eye system. Opto-Electronic Engineering. 2014: 41(3): 35-42.(in Chinese)
  22. Zhang S. S., Song L., Zhang X., Fang F. Z. A compact high-speed 3D tracking module based on a compound eye camera. Journal of Optoelectronic Laser. 2014; 9(26): 1796-802.(in Chinese)
  23. Fang F. Z., Ni H, Gong H. Rotary Ultrasonic Machining of Hard and Brittle Materials. Nanotechnology and Precision Engineering. 2014; 12(3): 227-34.(in Chinese)
  24. Wu Q. Q., Zhang X. D., Fang F. Z., Zhang L. Shape measurement of the cubic phase plate with wavefront sensing technology. Optical Technique. 2014; 40(2): 105-12.(in Chinese)
  25. Chen Y. H., Fang F. Z., Li Y. F., Wang Q. Y., Hu X. T. Investigation on fly-cutting of ion-implanted brittle material for enhancement of THz wave output. Aviation Precision Manufacturing Technology. 2014; (2): 1-3.(in Chinese)
  26. Fang, F. Z.*, Yu, J., Qiu, Z. J. Measurement and evaluation of freeform spectacle lenses - part II, MAFO. 2014; 11(4): 34-40.
  27. Fang, F. Z.*, Yu, J., Qiu, Z. J. Measurement and evaluation of freeform spectacle lenses - part I, MAFO. 2014; 10(3): 16-19.
  1. Fang F. Z.*, Zhang X. D., Weckenmann A., Zhang G. X., Evans C. Manufacturing and measurement of freeform optics. CIRP Annals-Manufacturing Technology. 2013; 62(2): 823-46.
  2. Gong H., Fang F. Z.*, Zhang X. F., Du J., Hu X. T. Study on the reduction strategy of machining-induced edge chipping based on finite element analysis of in-process workpiece structure. Journal of Manufacturing Science and Engineering-Transactions of the ASME. 2013; 135(1): 0110171-10.
  3. Hu X. K., Li Y. F., Fang F. Z., Li X., Li J., Chen Y. H., Zhang X. D., Chai L., Wang C. Y., Fedotov A. B., Zheltikov A. M. Enhancement of terahertz radiation from GaP emitters by subwavelength antireflective micropyramid structures. Optics Letters. 2013; 38(12): 2053-5.
  4. Lai M., Zhang X. D., Fang F. Z. Nanoindentation-induced phase transformation and structural deformation of monocrystalline germanium: a molecular dynamics simulation investigation. Nanoscale Research Letters. 2013; 8.
  5. Lai M., Zhang X. D., Fang F. Z.*, Wang Y. F., Feng M., Tian W. H. Study on nanometric cutting of germanium by molecular dynamics simulation. Nanoscale Research Letters. 2013; 8(13).
  6. Li Z. J., Fang F. Z.*, Gong H., Zhang X. D. Review of diamond-cutting ferrous metals. International Journal of Advanced Manufacturing Technology. 2013; 68(5-8): 1717-31.
  7. Song L., Fang F. Z.*, Zhao J. B. Study on viscosity measurement using fiber Bragg grating micro-vibration. Measurement Science & Technology. 2013; 24(1).
  8. Xiao Y. J., Fang F. Z.*, Xu Z. W., Wu W., Shen X. C. The study of Ga+ FIB implanting crystal silicon and subsequent annealing. Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms. 2013; 307: 253-6.
  9. Xu Z. W., Xu L. H., Fang F. Z.*, Gao H. F., Li W. L. Carbon nanotube's modification by focused ion beam irradiation and its healing strategies. Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms. 2013; 307: 203-6.
  10. Yuan D. D., Zhu P. Z., Fang F. Z., Qiu C. Study of nanoscratching of polymers by using molecular dynamics simulations. Science China- Physics Mechanics & Astronomy. 2013; 56(9): 1760-9.
  11. Zhang X. D., Fang F. Z.*, Wu Q. Q., Liu X. L., Gao H. M. Coordinate transformation machining of off-axis aspheric mirrors. International Journal of Advanced Manufacturing Technology. 2013; 67(9-12): 2217-24.
  12. Zhang X. D., Fang F. Z.*, Yu L. H., Jiang L. L., Guo Y. W. Slow slide servo turning of compound eye lens. Optical Engineering. 2013; 52(2).
  13. Zhao C. Y., Gong H., Fang F. Z., Li Z. J. Experimental study on the cutting force difference between rotary ultrasonic machining and conventional diamond grinding of K9 glass. Machining Science and Technology. 2013; 17(1): 129-44.
  14. Li G. H., Xu Z. W., Fang F. Z.*, Wu W., Xing X. D., Li W. L., Liu H. Z. Micro cutting of V-shaped cylindrical grating template for roller nano-imprint. Journal of Materials Processing Technology. 2013; 213(6): 895-904.
  15. Qiu Z. J., Fang F. Z.*, Zhao Q. Z., Zhou L. B. Online image measurement method for micro-round nose diamond turning tools. Journal of Mechanical Engineering. 2013; 49(17): 26-32.
  16. Xu F. F., Zhang X. D., Fang F. Z. Characterization of single point diamond machined single-crystal silicon. Nanotechnology and Precision Engineering. 2013; 11(6): 485-91.(in Chinese)
  17. Du J., Li Z. J., Gong H., Fang F. Z. Study on the mechanisms and control method of edge chipping fracture in the machining of brittle and hard materials. Mechanical Science and Technology. 2013,32(10);1451-5.(in Chinese)
  18. Duan Q., Qiu Z. J., Fang F. Z. Near infrared heating method and device study on micro-injection mould. China Plastics Industry. 2013; 41(12): 32-5.(in Chinese)
  19. Qiu Z. J., Fang F. Z., Zhao Q. Z., Zhou L. B. Online image measurement method for micro-round nose diamond turning tools. Chinese Journal of Mechanical Engineering. 2013; 49(17): 26-32.(in Chinese)
  20. Chen X. W., Zhang X. D., Fang F. Z. Simulating nanometric cutting mechanism of single-crystal copper with quasicontinuum numerical method. Mechanical Science and Technology. 2013; 32(8): 1098-102.(in Chinese)
  21. Fang F. Z., Xu Z. W. Technology and progress of nano machining using focused ion beam. Transactions of the Heilongjiang University of Science and Technology. 2013; (3): 211-21.(in Chinese)
  22. Qiu Z. J., Yi P., Lu C., Fang F. Z. Mechanical property analysis of modified quartz glass. Journal of Materials Science and Engineering. 2013; (1): 6-10.(in Chinese)
  23. Huang K. T., Fang F. Z., Gong H. Effect of surface microscopic topology generated by ultra-precision turning on optical characteristics. Optics and Precision Engineering. 2013; 21(1): 101-7.(in Chinese)
  24. Fang F. Z.*, ChengY., Zhang X. D. Design of freeform optics. Advanced Optical Technologies. 2013; 2(5-6): 445-53.
  25. Li Z. J., Fang F. Z.*, Gong H. Review of diamond-cutting ferrous metals. International Journal of Advanced Manufacturing Technology. 2013; 1(15): 1717-31.
  26. Li Z. J., Fang F. Z., Gong H., Zhang X. D. Effects of surface modifications on steel’s machinability in single-point diamond turning. International Journal of Precision Technology. 2013; 3(2): 105-16.
  27. Zhang X. D., Wang Q. C., Fang F. Z.*, Liu X. L. Controllable fabrication of freeform optics. International Journal of Precision Technology. 2013; 3(3): 277-89.
  28. Wang J., Fu Y. Q., Xu Z. W., Fang F. Z.* Influence of interaction between fiber probe and sample surface on near-field probing of plasmonic structures. Quantum Matter. 2013; 2(4): 289-95.
  1. Chen Y. H., Fang F. Z., Xu Z. W., Zhang X. D., Hu X. T. Surface modification for brittle monocrystalline materials by MeV ions. Nuclear Instruments & Methods in Physics Research Section B-Beam Interactions with Materials and Atoms. 2012; 272: 433-6.
  2. Cheng Y., Fang F. Z.*, Zhang X. D. Design and manufacture of off-axis optical reflective integrator with faceted structure. Optical Engineering. 2012; 51(9).
  3. Gao T. T., Xu Z. W., Fang F. Z.*, Gao W. L., Zhang Q., Xu X. X. High performance surface-enhanced Raman scattering substrates of Si-based Au film developed by focused ion beam nanofabrication. Nanoscale Research Letters. 2012; 7.
  4. Gong H., Fang F. Z.*, Hu X. T. Accurate spiral tool path generation of ultraprecision three-axis turning for non-zero rake angle using symbolic computation. International Journal of Advanced Manufacturing Technology. 2012; 58(9-12): 841-7.
  5. Ju B. F., Chen Y. L., Zhang W., Fang F. Z. Rapid measurement of a high step microstructure with 90 degrees steep sidewall. Review of Scientific Instruments. 2012; 83(1).
  6. Ju B. F., Chen Y. L., Zhang W., Zhu W. L., Jin C., Fang F. Z. Long range and accurate measurement of deep trench microstructures by a specialized scanning tunneling microscope. Review of Scientific Instruments. 2012; 83(5).
  7. Lai M., Zhang X. D., Fang F. Z.* Study on critical rake angle in nanometric cutting. Applied Physics A-Materials Science & Processing. 2012; 108(4): 809-18.
  8. Liu L. P., Lin B., Fang F. Z.* Design of a novel air bearing workbench for rotary ultrasonic drilling of advanced ceramics. Journal of Mechanical Design. 2012; 134(9).
  9. Tang X., Fu Y. Q., Xu Z. W., Fang F. Z., Li J. M., Hu X. T. The size effect of periodic metallic nanoholes array in surface enhance Raman scattering substrate. Journal of Computational and Theoretical Nanoscience. 2012; 9(8): 1125-8.
  10. Xu Z. W., Fang F. Z.*, Gao H. F., Zhu Y. B., Wu W., Weckenmann A. Nano fabrication of star structure for precision metrology developed by focused ion beam direct writing. CIRP Annals-Manufacturing Technology. 2012; 61(1): 511-4.
  11. Zhu P. Z., Fang F. Z.* Molecular dynamics simulations of nanoindentation of monocrystalline germanium. Applied Physics A-Materials Science & Processing. 2012; 108(2): 415-21.
  12. Zhu P. Z., Hu Y. Z., Fang F. Z., Wang H. Multiscale simulations of nanoindentation and nanoscratch of single crystal copper. Applied Surface Science. 2012; 258(10): 4624-31.
  13. Dong Y. H., Zhang X. F., Fang F. Z., Qiu Z. J., Gong H. Study on integrated machine tool with ultrasonic assisted grinding for brittle and hard materials and process. Journal of Huazhong University of Science and Technology . 2012; 40(SUPPL.2): 113-6.(in Chinese)
  14. Guo Y. W., Zhang X. D., Wu Q. Q., Fang F. Z. Design of freeform prism based on toleranceing principle. Optical Technique. 2012; 258(10): 4624-31.
  15. Zhu P. Z., Fang F. Z. Study on nanometric cutting process of single crystal silicon based on multiscale method. Journal of Heilongjiang Institute of Science and Technology. 2012; 22(4): 348-53. (in Chinese)
  16. Zhao C. Y., Gong H., Fang F. Z. Experimental Investigation on the Surface Quality in Rotary Ultrasonic Grinding of Cemented Carbide. Mechanical Science and Technology. 2012; 31(10): 1584-7.
  17. Wang H. Y., Qiu Z. J., Lu R. J., Fang F. Z. Design and analysis of clamping mechanism for desktop model micro-injection molding machine. Engineering Plastics Application. 2012; 40(8): 54-8.
  18. Qiu Z. J., Zheng H., Fang F. Z., Wang H. Y. Longitudinal ultrasound-assisted micro-injection moulding method. Nanotechnology and Precision Engineering. 2012; 10(2): 170-6.
  1. Fang F. Z.*, Chen Y. H., Zhang X. D., Hu X. T., Zhang G. X. Nanometric cutting of single crystal silicon surfaces modified by ion implantation. CIRP Annals-Manufacturing Technology. 2011; 60(1): 527-30.
  2. Liu L. P., Lin B., Fang F. Z. Monitoring of tool wear in rotary ultrasonic machining of advanced Ceramics. Advanced Manufacturing Technology, Pts 1-3. 2011; 314-316: 1754-9.
  3. Liu L. P., Lin B., Fang F. Z. Study on a novel adaptive force control table employed for rotary ultrasonic drilling. Information Engineering for Mechanics and Materials Science, Pts 1 and 2. 2011; 80-81: 1027-31.
  4.  Liu Y., Fu Y. Q., Zhou X. L., Xu Z. W., Fang F. Z., Hu X. T. Experimental study of indirect phase tuning-based plasmonic structures for finely focusing. Plasmonics. 2011; 6(2): 227-33.
  5. Qiu Z. J., Fang F. Z.*, Ding L. Y., Zhao Q. Z. Investigation of diamond cutting tool lapping system based on on-machine image measurement. International Journal of Advanced Manufacturing Technology. 2011; 56(1-4): 79-86.
  6. Fang F. Z., Nie Y. H., Zhang X. D. Design of fast tool servo system based on magnetic field analysis. Nanotechnology and Precision Engineering. 2011; 9(6): 539-44. (in Chinese)
  7. Zhao H. X., Qiu Z. J., Fang F. Z. Effect of ultrasonic vibration on the rheological behavior of polymer in micro-channel. China Plastics Industry. 2011; 39(12): 63-7. (in Chinese)
  8. Zheng H., Qiu Z. J., Fang F. Z. Experimental investigation on micro injection molding for fresnel lens. Engineering Plastics Application. 2011; 39(12): 39-42. (in Chinese)
  9. Nie Y. H., Fang F. Z., Zhang X. D., Sun C. K. Design of ultrafast tool servo based on FEA magnetic analysis. Modern Manufacturing Engineering. 2011; (7): 1-5. (in Chinese)
  10. Cheng, Y.,Fang, F. Z., Zhang, X. D., Hu, X. T. Design and fabrication of composite solar concentrator. Key Engineering Materials. 2011; 447-448: 366-70.
  1. Cheng Y., Fang F. Z.*, Zhang X. D., Hu X. T. Design and fabrication of composite solar concentrator. Advanced Precision Engineering. 2010; 447-448: 366-70.
  2. Fang F. Z.*, Xu Z. W., Hu X. T., Wang C. T., Luo X. G., Fu Y. Q. Nano-photomask fabrication using focused ion beam direct writing. CIRP Annals-Manufacturing Technology. 2010; 59(1): 543-6.
  3. Fu Y. Q., Liu Y., Zhou X. L., Xu Z. W., Fang F. Z. Experimental investigation of super focusing of plasmonic lens with chirped circular nanoslits. Optics Express. 2010; 18(4): 3438-43.
  4. Gong H., Fang F. Z.*, Hu X. T. Kinematic view of toot life in rotary ultrasonic side milling of hard and brittle materials. International Journal of Machine Tools & Manufacture. 2010; 50(3): 303-7.
  5. Gong H., Fang F. Z., Hu X. T., Cao L. X., Liu J. A. Optimization of tool positions locally based on the BCELTP for 5-axis machining of free-form surfaces. Computer-Aided Design. 2010; 42(6): 558-70.
  6. Xu Z. W., Fang F. Z., Zhang S. J., Zhang X. D., Hu X. T., Fu Y. Q., Li L. Fabrication of micro DOE using micro tools shaped with focused ion beam. Optics Express. 2010; 18(8): 8025-32.
  7. Zhang X. D., Fang F. Z., Cheng Y., Wei G. S. High efficiency ultra-precision turning for complex aspheric mirrors. Nanotechnology and Precision Engineering. 2010; (4): 346-51.(in Chinese)
  8. Qiu Z. J., Fang F. Z., Shina T., Eda H. Chemical mechanical grinding for quartz glass. Optics and Precision Engineering. 2010; 18(7): 1554-61.(in Chinese)
  9. Wei G. S., Zhang X. D., Fang F. Z., Hu X. T. In-situ measurement method based on ultra-precision machine for optical free-form surface. Optical Technique. 2010; (6): 829-833.(in Chinese)
  10. Wang H. B., Gong H., Fang F. Z., Study on rotary ultrasonic machining system. Aviation Precision Manufacturing Technology. 2010; (5): 39-41.(in Chinese)
  11. Zhao Q. Z., Qiu Z. J., Fang F. Z. Development of image processing system for diamond turning tool automatic grinding device. Diamond?Abrasives Engineering. 2010; (4): 38-41.(in Chinese)
  12. Zhang X. D., Fang F. Z., Cheng Y., Xu Z. W., Zhang S. J., Wei G. S. Ultra-precision machining of Fresnel elements fabricated by micro tools. Infrared and Laser Engineering. 2010; (3): 502-5.(in Chinese)
  13. Zhang S. J., Xu Z. W., Fang F. Z., Hu X. T. Fabrication of micro tool using focused ion beam milling technique. Transactions of Tianjin University. 2010; 43(5): 469-72.(in Chinese)
  14. Han T., Xu Z. W., Fang F. Z., Zhang S. J. Research into the CNT manufacturing technics based on focused ion beam/electron beam technique. Modern Manufacturing Engineering. 2010,(3);5-8.(in Chinese)
  15. Cheng Y., Fang F. Z., Zhang X. D. Ultra-precision turning of aspheric mirrors using error-decreasing amendment method. Optical Technique. 2010; (1): 51-5.(in Chinese)
  1. Dai T. F., Fang F. Z.*, Hu X. T. Tool wear study in diamond turning of steels. Journal of Vacuum Science & Technology B. 2009; 27(3): 1335-9.
  2. Fang F. Z.*, Xu Z. W., Zhang G. X., Hu X. T. Fabrication and configuration of carbon nanotube probes in atomic force microscopy. CIRP Ann-Manuf Techn. 2009; 58(1): 455-8.
  3. Wang Q. Y., Fang F. Z.*, Hu X. T. Development of three-axis desktop milling machine. Journal of Vacuum Science & Technology B. 2009; 27(3): 1278-84.
  4. Wang Y. B., Wang C. L., Xing Q. R., Liu F., Li Y. F., Chai L., Wang Q. Y., Fang F. Z., Zhang X. D. Periodic optical delay line based on a tilted parabolic generatrix helicoid reflective mirror. Appl Optics. 2009; 48(11): 1998-2005.
  5. Xu Z. W., Fang F. Z.* Configuration control of carbon nanotube probe in atomic force microscopy. Journal of Vacuum Science & Technology B. 2009; 27(3): 1388-93.
  6. Xu Z. W., Fang F. Z., Fu Y. Q., Zhang S. J., Han T., Li J. M. Fabrication of micro/nano-structures using focused ion beam implantation and XeF2 gas-assisted etching. Journal of Micromechanics and Microengineering. 2009; 19(5).
  7. Xu Z. W., Fang F. Z.*, Hu X. T. Fabrication of carbon nanotube probes in atomic force microscopy. Advances in Abrasive Technology. 2009; 76-78: 497-501.
  8. Zhang S. J., Fang F. Z.*, Xu Z. W., Hu X. T. Controlled morphology of microtools shaped using focused ion beam milling technique. Journal of Vacuum Science & Technology B. 2009; 27(3): 1304-9.
  9. Zhang X. D., Fang F. Z., Wang H. B., Wei G. S., Hu X. T. Ultra-precision machining of sinusoidal surfaces using the cylindrical coordinate method. Journal of Micromechanics and Microengineering. 2009; 19(5).
  10. Zhang Z. G., Fang F. Z.*, Hu X. T., Sun C. K. Three-dimensional molecular dynamics modeling of nanocutting. Journal of Vacuum Science & Technology B. 2009; 27(3): 1340-4.
  11. Zhang Z. G., Fang F. Z.*, Hu X. T., Sun C. K. Molecular dynamics study on various nanometric cutting boundary conditions. Journal of Vacuum Science & Technology B. 2009; 27(3): 1355-60.
  12. Zhang X. D., Fang F. Z., Cheng Y. Optimized design of cutting path for freeform surface in ultra-precision turning. Transactions of Tianjin University. 2009; 42(3): 278-82. (in Chinese)
  13. Xu Z. W., Fang F. Z., Zhang S. J., Han T., Li J. M. Fabrication of complicated micronano structures using focused ion beam milling method. Transactions of Tianjin University. 2009; 42(1):91-4.(in Chinese)
  14. Xu Z. W., Zhang S. J., Fang F. Z., Dong S., Chen Y. H. Effects of carbon nanotube probe mechanical properties on its performance. Chinese Journal of Scientific Instrument. 2009; 30(1):157-61.(in Chinese)
  15. Xu Z. W.,Fang F. Z., Zhang S. J., Chen Y. H. Fabrication of micro/nano structures using focused ion beam implantation technology. Transactions of the Heilongjiang University of Science and Technology. 2009; 28(1): 62-7. (in Chinese)
  16. YiM. B., Fang F. Z., Wang Q. W. Research on micro electrical discharge machining system and technics. Modern Manufacturing Engineering. 2009; (3):70-4. (in Chinese)
  17. Zhang X. D., Fang F. Z. Automatic processing algorithm of calibration pattern for structured light vision sensor. Chinese Journal of Sensors and Actuators. 2009; 22(10): 1426-31. (in Chinese)
  18. Ni H., Gong H., Fang F. Z. Study on edge-chipping of brittle and hard materials in rotary ultrasonic machining. Manufacturing Technology. 2009; 45(5): 8-10. (in Chinese)
  19. Xu Z. W., Fang F. Z., Zhao T. Q., Dong S. Nano morphology of mice IgG protein with carbon nanotube probe. Journal of Tianjin University. 2009; 42 (10): 919-22. (in Chinese)
  1. Ding X. Z., Zeng X. T., Liu Y. C., Fang F. Z., Lim G. C. Cr(1-x)Al(x)N coatings deposited by lateral rotating cathode arc for high speed machining applications. Thin Solid Films. 2008; 516(8): 1710-5.
  2. Fang F. Z.*, Xu Z. W., Dong S. Study on phase images of a carbon nanotube probe in atomic force microscopy. Measurement Science & Technology. 2008; 19(5): 055051(1-7).
  3. Fang F. Z.*, Zhang X. D., Hu X. T. Cylindrical coordinate machining of optical freeform surfaces. Optics Express. 2008; 16(10): 7323-9.
  4. Liu N., Zhang Y. M., Fang F. Z. A novel method of lens initial structure selection: study on structures-aperture relationship of finite image distance achromatic spherical microscope objective with larger numerical aperture. Optical Design and Testing Parts 1 and 2. 2008; 6834: A8343-A8343.
  5. Woon K. S., Rahman M., Fang F. Z., Neo K. S., Liu K. Investigations of tool edge radius effect in micromachining: A FEM simulation approach. Journal of Materials Processing Technology. 2008; 195(1-3): 204-11.
  6. Zhang G. X., Yao J. W., Qiu Z. R., Hu W. C., Fang F. Z., Li X. H. Large-scale space angle measurement. CIRP Annals-Manufacturing Technology. 2008; 57(1): 525-8.
  7. Fang F. Z., Wang L. Research on the cutting mold steel by applying ultrasonic vibration. Modern Manufacturing Engineering. 2008; (11): 54-8. (in Chinese)
  8. Xu Z. W., Fang F. Z., Wang J. H. The research of AFM probe used for DNA cutting. 2008; 6(8):37-9. (in Chinese)
  1. Zhang Z. G., Fang F. Z.*, Sun C. K. Nano-scale cutting mechanism by molecular dynamics simulation. Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems. 2007; 6724.
  2. Zhang S. J., Fang F. Z., Hu X. T. Advances of focused ion beam in micromachining technology. Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems. 2007; 6724: E7240-E.
  3. Wang Q. Y., Fang F. Z., Hu X. T. Comprehensive review of micro/meso-scale machine tools. Design, Manufacturing, and Testing of Micro- and Nano-Optical Devices and Systems. 2007; 6724: K7241-K.
  4. Fang F. Z.*, Xu Z. W., Dong S., Zhang G. X. High aspect ratio nanometrology using carbon nanotube probes in atomic force microscopy. CIRP Annals-Manufacturing Technology. 2007; 56(1): 533-6.
  5. Fang F. Z.*, Wu H., Zhou W., Hu X. T. A study on mechanism of nano-cutting single crystal silicon. Journal of Materials Processing Technology. 2007; 184(1-3): 407-10.
  6. Fang F. Z., Liu Y., Pei Q. X. Method of examining surface cracks on monocrystalline silicon. Key Materials Engineering. 2007; 364-366: 902-24.
  1. Wu H., Fang F. Z., Pei Q. X. Study on nanometric cutting mechanism and burr formation using molecular dynamics simulation. International Journal of Nanoscience. 2006; 5(4-5): 547-51.
  2. Pei Q. X., Lu C., Fang F. Z., Wu H. Molecular dynamics simulation of nanometric cutting process. International Journal of Nanoscience. 2006; 5(4-5): 633-8.
  3. Pei Q. X., Lu C., Fang F. Z., Wu H. Nanometric cutting of copper: A molecular dynamics study. Computational Materials Science. 2006; 37(4): 434-41.
  4. Fang F. Z.*, Xiong Z., Hui X. T. An experimental study of micromachining step-mirrors for laser-diode beam shaping. Journal of Micromechanics and Microengineering. 2006; 16(2): 214-8.
  5. Fang F. Z.*, Liu Y. C. Energy variation of micro-cracking on single crystal silicon. Advanced Laser Technologies Parts 1 and 2. 2006; 6344.
  1. Fang F. Z.*, Wu H., Liu Y. C. Modelling and experimental investigation on nanometric cutting of monocrystalline silicon. International Journal of Machine Tools & Manufacture. 2005; 45(15): 1681-6.
  2. Fang F. Z.*, Lee L. C., Liu X. D. Mean flank temperature measurement in high speed dry cutting of magnesium alloy. Journal of Materials Processing Technology. 2005; 167(1): 119-23.
  3. Fang F. Z., Ramesh K, Liu X. D. Polishing micro holes of optical fiber ferrules. Nanotechnology and Precision Engineering. 2005; 3(2):146-50.(in Chinese)
  1. Qiu G. P., Feng X., Fang F. Z. Compressing histogram representations for automatic colour photo categorization. Pattern Recognition. 2004; 37(11): 2177-93.
  2. Fang F. Z.*, Zhang G. X. An experimental study of optical glass machining. International Journal of Advanced Manufacturing Technology. 2004; 23(3-4): 155-60.
  3. Fang F. Z.*, Liu Y. C. On minimum exit-burr in micro cutting. Journal of Micromechanics and Microengineering. 2004; 14(7): 984-8.
  4. Fang F. Z.*, Zhang G. X. An experimental study of edge radius effect on cutting single crystal silicon. International Journal of Advanced Manufacturing Technology. 2003; 22(9-10): 703-7.
  5. Fang F. Z.*, Wu H., Liu X. D., Liu Y. C., Ng S. T. Tool geometry study in micromachining. Journal of Micromechanics and Microengineering. 2003; 13(5): 726-31.
  6. Fang F. Z.*, Liu X. D., Lee L. C. Micro-machining of optical glasses - A review of diamond-cutting glasses. Sadhana-Academy Proceedings In Engineering Sciences. 2003; 28: 945-55.
  7. Fang F. Z., Liu X. D., Lee L. C. Ultra-precision machining of brittle Materials--A review of diamond-cutting brittle materials. Nanotechnology and Precision Engineering. 2003; 1(1):38-47.(in Chinese)
  8. Zhang G. X., Li X. H., Lin Y. B., Fang F. Z. Design and error analysis of laser tracking system. China Mechanical Engineering. 2003; 14(6): 501-4.(in Chinese)
  9. Fang F. Z.*, Venkatesh V. C., Zhang G. X. Diamond turning of soft semiconductors to obtain nanometric mirror surfaces. International Journal of Advanced Manufacturing Technology. 2002; 19(9): 637-41.
  10. Fang F. Z.*, Chen L. J. Ultra-precision cutting for ZKN7 glass. CIRP Annals-Manufacturing Technology. 2000: 17-20.
  11. Fang F. Z.* Nano-turning of single crystal silicon. Journal of Materials Processing Technology. 1998; 82(1-3): 95-101.
  12. Fang F. Z.*, VenkateshV. C. Diamond cutting of silicon with nanometric finish. CIRP Annals-Manufacturing Technology. 1998; 47(1): 45-9.
  13. Fang F. Z., ZhangY. Q., ZhangG. X. A position-setting method of six-freedom in space. Aviation Precision Manufacturing Technology. 1998; 2: 37-9.(In Chinese)
  14. Fang F. Z.. Achieving the threshold barrier of 1 nm roughness value by diamond turning of silicon surfaces. Chinese Journal of Mechanical Engineering. 1998; 11(1): 6-10.
  15. Venkatesh V. C., Fang F. Z., CheeW. K. On mirror surfaces obtained with and without polishing. CIRP Annals-Manufacturing Technology. 1997; 46(1): 505-50.
  16. Fang F. Z., Zhang G. X. A coustooptic modulated laser measuring technique. Manufacturing Technology & Machine Tool.1996; 6: 8-11.(in Chinese)
  17. Fang F. Z., DongS. X-ray interferometry for nanometric measurement. Chinese Journal of Scientific Instrument. 1995; 16(1): 28-31.(in Chinese)
  18. Fang F. Z., Yuan, Z. J. An open measuring system for ultra-precision machine tools. Manufacturing Technology & Machine Tool. 1994; 7: 17-9. (in Chinese)
  19. Fang F. Z., Yuan Z. J. Positioning and measuring technique on ultra-precision turning machines. China Mechanical Engineering. 1994; 5(2): 49-51.(in Chinese)
  20. Fang F. Z., Yuan Z. J. An application of Intel 8098 in precision measurement. Journal of Machinery & Electronics. 1994; 2: 28-30.(in Chinese)
  21. Fang F. Z., Yuan Z. J. Investigation on in-process measuring system of ultra-precision turning machines and design on hardware of rapid data acquisition. Journal of Tooling Engineering. 1994;11: 20-2.(in Chinese)
  22. Zhao F.,Fang F. Z. A new machining technique for piston grooves. Journal of Mining Machinery. 1989; 6: 24-5.(in Chinese)
  23. Zhao F., Fang F. Z. Precision grinding with the abrasive belt. Mechanical Engineer. 1989; 3: 38-9.(in Chinese)
  24. Shu Z., Fang F. Z. Design on the speed-transformation of gear-hobCbing machine. Journal of Mining Machinery. 1987; 2: 19-21.(in Chinese)
  25. Fang F. Z. Investigation on the new tip relief profile of involute gears. Journal of Mining Machinery. 1987; 1:14-6.(in Chinese)
  26. Fang F. Z., Liang X. C. CAD on the involute curve generator. Machine Design. 1986; 3: 31-4.(in Chinese)
  27. Wang X., Fang F. Z. Precision form-grinding on the gears of gear-pump. Journal of Hydraulics & Penumatics. 1986; 3: 42-4.(in Chinese)
  28. Liang X. C., Fang F. Z., Wang X. J. Gear form-grinding and the design of the dressing system. Journal of Gear. 1984; 5: 31-3.(in Chinese)