Navigation

Researchers at UCD

researcher

Gerald Byrne

Professor of Mechanical Engineering

Engineering Building
Belfield
Dublin 4

Tel: +353 1 7161883
Email: gerald.byrne@ucd.ie

Professional

Honours and Awards

Year: 2009.
Title: Fellow German Academy of Science and Engineering
Year: 2009.
Title: President of the International Academy for Production Engineering (CIRP)
Year: 2000.
Title: President of Engineers Ireland
Year: 2008.
Title: Silver Medal Young European Arena of Research 2008 - Donal Gildea
Year: 0.
Title: Elected to the CIRP
Year: 1989.
Title: Golden Ring of the German Institution of Engineers
Year: 1998.
Title: Founding Fellow
Year: 1998.
Title: College of Fellows of the Society of Manufacturing Engineers
Year: 2001.
Title: President of the Institution of Engineers
Year: 2002.
Title: President of the Irish Academy of Engineering
Year: 2003.
Title: INternational Fellow of the Royal Academy of Engineering (FREng, UK)
Year: 2004.
Title: Presidents Award ACEI 2004

Associations

Association: International Fellow of the Royal Academy of Engineering (FREng), 2003, Function/Role: Honorary recognition of contribution to Engineering*
Association: Fellow of the Irish Academy of Engineering, 1997, Function/Role: *
Association: Fellow, Society of Manufacturing Engineers, USA, (Honorary Life Member) 1998 , Function/Role: *
Association: Honorary Life Member of the German Institution of Engineers (VDI, Germany), 1990 , Function/Role: *
Association: Fellow and Chartered Member of the Institution of Engineers of Ireland, (FIEI). , Function/Role: *
Association: Fellow and Chartered Member of the Institution of Mechanical Engineers, UK (FIMechE) , Function/Role: *
Association: Fellow of the Institution of Electrical Engineers, UK (FIEE), Function/Role: *
Association: European Engineer (Eur Ing) registered with FEANI, Paris , Function/Role: *
Association: Member of the American Society of Mechanical Engineers (ASME) since 2003 , Function/Role: *
Association: European Research Advisory Board [EURAB up to June 2004], Function/Role: Member
Association: Enterprise Ireland Research and Technological Innovation Board , Function/Role: Member
     

Conference Contributions

Fiorini, P.V., Byrne, G., Ahearne, E; (2009) Symposium. [Oral Presentation], 12th Annual Sir Bernard Crossland Symposium, Queen's University, Belfast, Northern Ireland , 22-APR-09 - 23-APR-09.
Byrne, G.; (2009) ISDM 09. [Keynote Address], 2nd International Symposium on Digital Manufacturing, Wuhan University of Technology, China , 10-SEP-09 - 11-SEP-09.
Byrne, G.; (2009) IPS2. [Keynote Address], CIRP IPS2 Conference, Cranfield University, UK , 01-APR-09 - 02-APR-09.
Byrne, G.; (2009) CIRP Conference. [Keynote Address], 7th Global Conference on Sustainable Manufacturing, IIT Chennai, India , 02-DEC-09 - 04-DEC-09.
Byrne, G.; (2009) SIRRIS. [Keynote Address], SIRRIS Manufacturing Day, De Montil, Affligem, Belgium , 07-MAY-09 - 07-MAY-09.
Byrne, G.; (2009) CIRP UK 2009. [Keynote Address], CIRP UK Annual Meeting 2009, Glasgow University, Scotland , 09-MAY-09 - 09-MAY-09.
Byrne, G.; (2009) CIRP Research Affiliates. [Other], Meeting of the Research Affiliates of CIRP, Technical University of Denmark (DTU), Copenhagen , 02-JUL-09 - 02-JUL-09.
Byrne, G.; (2009) ISDM 09. [Other], 2nd International Symposium on Digital Manufacturing, Wuhan University of Technology, China , 10-SEP-09 - 11-SEP-09.
Byrne, G.; (2009) ICM 26. [Keynote Address], 26th International Manufacturing Conference, Trinity College Dublin, Ireland , 02-SEP-09 - 04-SEP-09.
Byrne, G.; (2009) CIRP GA. [Other], 2009 CIRP General Assembly, MIT, Boston, USA , 23-AUG-09 - 29-AUG-09.
Byrne, G.; (2010) eniProd. [Other], 1st International Colloquium of the Cluster of Excellence eniPROD, Chemnitz University of Technology & Fraunhofer IWU Chemnitz/Dresden, Chemnitz, Germany , 24-JUN-10 - 25-JUN-10.
Byrne, G.; (2010) COMA 10. [Chaired Session], International Conference on Competitive Manufacturing, COMA 10, Stellenbosch University, Cape Town, South Africa , 03-FEB-10 - 05-FEB-10.
Byrne, G. and Ahearne, E.; (2010) P3. [Keynote Address], 1st International Conference on Product Property Prediction - P3, Technical University Dortmund, Germany , 12-APR-10 - 13-APR-10.
Byrne, G.; (2010) ICFDM. [Keynote Address], 9th International Conference on Frontiers of Design and Manufacturing Science (ICFDM), Hunan University, Changsha, China , 17-JUL-10 - 20-JUL-10.
Byrne, G.; (2010) Green Manufacturing - Energy and Resource Efficient Manufacturing Processes. [Keynote Address], Research Affiliates of CIRP, 2010 Annual Meeting, Trinity College Dublin, Ireland , 01-JUL-10 - 01-JUL-10.
Byrne, G.; (2010) eniProd. [Keynote Address], 1st International Colloquium of the Cluster of Excellence eniPROD, Chemnitz University of Technology & Fraunhofer IWU Chemnitz/Dresden, Chemnitz, Germany , 24-JUN-10 - 25-JUN-10.
Byrne, G.; (2010) COMA 10. [Other], International Conference on Competitive Manufacturing, COMA 10, Stellenbosch University, Cape Town , 03-FEB-10 - 05-FEB-10.
Byrne, G.; (2010) CIRP ICME 10. [Other], CIRP ICME 10 - 7th CIRP International Conference on Intelligent Computation in Manufacturing Engineering, University of Naples, Federico II, Capri, Italy , 23-JUN-10 - 25-JUN-10.
Byrne, G.; (2010) CIRP 2nd Internation Conference on Process Machine Interactions. [Other], 2nd International Conference Process Machine Interactions, University of British Columbia, Vancouver, Canada , 10-JUN-10 - 11-JUN-10.
Byrne, G.; (2010) Association Tante. [Keynote Address], Le titane et ses alliages Challendes Actuels et Futurs, Nantes, France , 26-MAY-10 - 27-MAY-10.
Byrne, G.; (2010) UCD-TCD Symposium. [Other], UCD-TCD Strategic Alliance in Innovative, High End, Manufacturing Engineering Symposium on Enabling Innovation in Process & Product Development,, University College Dublin, Ireland , 24-MAY-10 - 24-MAY-10.
Byrne, G.; (2010) CIRP UK Day. [Keynote Address], CIRP UK Manufacturing Technology Day, University of Nottingham, UK , 07-MAY-10 - 07-MAY-10.
Byrne, G.; (2010) WGP. [Keynote Address], WGP Spring Assembly 2010, German Society for Production Engineering Research WGP, Erfurt, Germany , 05-MAY-10 - 05-MAY-10.
Byrne, G.; (2010) Symposium. [Oral Presentation], Sir Bernard Crossland Annual Symposium, University College Dublin, Ireland , 29-APR-10 - 29-APR-10.
Byrne, G.; (2010) CAPE 2010. [Keynote Address], 21st International Computer-Aided Production Engineering Conference (CAPE 2010), University of Edinburgh, Scotland , 13-APR-10 - 14-APR-10.
Byrne, G.; (2008) Welcome Address. [Keynote Address], Chemnitzer Produktionstechnisches Kolloquim (CPK 2008), Chemnitz, Germany , 21-OCT-08 - 22-OCT-08.
Byrne, G.; (2008) Conference Chairman. [Conference Organising Committee Chairperson], 3rd CIRP International Conference High Performance Cutting, Dublin, Ireland , 12-JUN-08 - 13-JUN-08.
Byrne, G., Dunne, P. ; Effect of Processing Parameters on the Dimensional Accuracy of Injection Moulded Components produced in an Enhanced Silicon Rubber Mould . [N/A], Effect of Processing Parameters on the Dimensional Accuracy of Injection Moulded Components produced in an Enhanced Silicon Rubber Mould , * .
Kennedy, E., Byrne, G. ; Integration of Laser Processing into Conventional Machining Centres . [Poster Presentation], Poster Presentation Sir Bernard Crossland Annual Symposium April 2003, NUI, Galway. , Galway .
Dunne, P., Byrne, G. ; Evaluation Techniques for the Injection Moulding Design Process . [Poster Presentation], Poster Presentation, Conference on Engineering Design A New Challenge for Academia. October 2000. , * .
Byrne, G., Klocke, F. ; International Conference on High Performance Cutting. [Conference Organising Committee Member], (Joint Chairmanship: G. Byrne, F. Klocke, 2004. Currently being planned). , * .
Krause, F.-L., Byrne, G., Allen, T., FitzPatrick, D. ; (2000) Engineering Design in an Academic Environment . [Keynote Address], Invited Keynote Paper, Conference on Engineering Design A New Challenge for Academia, Dublin, October 12th 13th, 2000. , Dublin , 12-OCT-00 - 13-OCT-00.

Committees

Committee : European Research Advisory Board (EURAB) since September 2002. This Board is the top level advisory board to the EU on matters relating to research and development in Europe
Committee : · Member of the Steering Board for the Evaluation of the Quality of Engineering Programmes in Germany. Appointed as an external international expert by the German Science Council
Committee : · Member, Executive Committee Institution of Engineers of Ireland (1994 - 2002)
Committee : Chairman, Council of Professors of Mechanical Engineering in Irish Universities (1995 - 1999)
Committee : Chairman, Forum of Mechanical Engineering (with SMEs) (1995 - 1999)
Committee : Member, Faculty Executive, Faculty of Engineering and Architecture, University College Dublin (since 1993)
Committee : Member of Academic Council, University College Dublin (since 1993)
Committee : Professorial Director, Product Design & Development Centre. (Collaborative Centre with the Northern Ireland Technology Centre, Queens University, Belfast)
Committee : Member of Board of Studies for new M.Sc. in Technology Management (1997 present)
Committee : Member Executive Committee of National Institute of Technology Management
Committee : President, Institution of Engineers of Ireland, IEI for the year 2000/2001
Committee : Member, Technology Foresight Panel, Forfás (1998 2000)
Committee : Chairman, Institution of Engineers of Ireland, IEI Committee on Continuing Professional Development (CPD), 1998/99
Committee : Project leader for University/Industry Project on Design of an Automated Inspection System for PCB Boards (1997 - 1999)
Committee : Task leader in BRITE-EURAM Project in association with the automotive industry in Europe (BMW, Daimler Benz, Volvo, Comau) entitled The Development of New Machining Processes. This task involved the theoretical analysis and simulation of the fundamental mechanisms of surface generation in machining.
Committee : University Evaluator National University of Ireland, Department of Education Leaving Certificate Examination (since 1995)
Committee : Project Leader at UCD in EU Brite Project Compensation of Stocastic Deviations in Monitoring Systems (COMPRO), 1997 to 2000
Committee : Chairman of the Scientific Technical Committee Cutting STC C CIRP 2003 - 2006
Committee : Member of the Council of CIRP (2003 present)
Committee : Member of Eurocase, The European Academy of Engineering (2003 present)
Committee : Board of the University Industry Centre at University College Dublin (1994 - 1999)
Committee : Co-Chairman of the CIRP Working Group on Tool Condition Monitoring (1993 - 1996)
Committee : Work undertaken with the Irish Industrial Development Boards in Germany (1990-1993)
Committee : Technical Secretary of Scientific Technical Committee for Abrasive Processes (STC G) of the International Institution of Production Engineering Research (CIRP) 1989-1998
Committee : Member of Programme Committees for many International Conferences on Manufacturing
Committee : Reviewer for several journals including the Journal of Engineering for Industry
Committee : Member of the R&D Committee of the Institution of Engineers of Ireland
Committee : Board of the Environmental Institute at University College Dublin (1995 -2000)
Committee : Member of the Accreditating Panel of the Institution of Engineers of Ireland for Mechanical/Industrial Engineering Courses running in Irish Universities (since 1994).
Committee : Member of Council of Institutions of Engineers of Ireland (1995 - 2002)
Committee : Board of the National Heat Treatment Centre since 1995
Committee : Board of Product Design and Development Centre (1995 2000)
Committee : Member of the Engineering Sciences Committee of the Royal Irish Academy (1998 - 2000)
Committee : Active Member International Institution for Production Engineering Research (CIRP)
Committee : Chairman, Editorial Committee of CIRP (1997 2002)
Committee : Expert Evaluator with the EU for the ESPRIT and BRITE-EURAM Programmes
Committee : Expert Evaluator with the European Union for the Mobility of Researchers Programme
Committee : Expert Evaluator with EU for Intelligent Manufacturing Systems (IMS) Programme
Committee : Expert Evaluator for Enterprise Ireland, Strategic and Basic Research Programmes
Committee : Member of Accreditation Panel, Dublin Institute of Technology, 1996
Committee : Chairman, Consortium for the Engineering Services Sector, 1996
Committee : Co-ordinator of EU Project on Quality Evaluation in Engineering Education (1994- 1997)
Committee : Member of the Steering Committee of the Academic Council for Quality Assurance, UCD (1995 - 2000)
             

Publications

Books

Byrne, G; (2009) Engineering Your Career. A detailed guide to the Engineering Profession in Ireland. Dublin, Ireland: Engieers Ireland and Discover Science Engineering. [Details]
Byrne, G.; (2007) Engineering Your Career - A detailed guide to the Engineering Profession in Ireland. Dublin, Ireland: Engineers Ireland and Discover Science and Engineering. [Details]
Byrne, G. ; (2002) Engineering as a Career A Detailed Guide to the Engineering Profession in Ireland. : *. [Details]
Byrne, G. ; (1997) Engineering Education in German Universitie A Preliminary Benchmarking Study in Mechanical Engineering. : UCD. [Details]
Byrne, G.; (1989) Das Zerspanen von weichmagnetischen Werkstoffen Produktionstechnik-Berlin Forschungsberichte für die Praxis. Berlin: *. [Details]

Book Chapters

Böllinghaus T., Byrne G., Cherpakov B.I. (deceased)., Chlebus E., Cross C. E., Denkena B., Dilthey U., Hatsuzawa T., Herfurth K., Herold H. (deceased)., Kaldos A, Kannengiesser T., Karpenko M., Karpuschewski B., Marya M, Marya S.K., Matthes K.J., Middeldorf K., Oliveira J.F.G., Pieschel J., Priem D.M., Riedel F., Schleser M., Tekkaya A.E., Todtermuschke M, Vereschaka A., von Hofe D., Wagner N., Wodara J., Woeste K.; (2009) 'Manufacturing Engineering' In: Böllinghaus T., Byrne G., Cherpakov B.I. (deceased)., Chlebus E., Cross C. E., Denkena B., Dilthey U., Hatsuzawa T., Herfurth K., Herold H. (deceased)., Kaldos A, Kannengiesser T., Karpenko M., Karpuschewski B., Marya M, Marya S.K., Matthes K.J., Middeldorf K., Oliveira J.F.G., Pieschel J., Priem D.M., Riedel F., Schleser M., Tekkaya A.E., Todtermuschke M, Vereschaka A., von Hofe D., Wagner N., W (eds). Springer Handbook of Mechanical Engineering. Berlin Heidelberg: Springer Science and Business Media. , pp.523-785 [Details]
Byrne, G.; (2006) 'Cutting Tool Materials' In: Byrne, G.; (eds). Dubbel's Handbook of Mechanical Engineering. New York: Springer-Verlag NY, Inc. [Details]
Byrne, G.; (2006) 'Micro Machining' In: Byrne, G.; (eds). Dubbel's Handbook of Mechanical Engineering. New York: Springer-Verlag NY, Inc. [Details]
 

Peer Reviewed Journals

Timoney, P., Ahearne, E., Byrne G. ; (2011) 'Development & Validation of a 200mm Wafer Scale Finite Element Model of Contact Pressure Distribution in Chemical Mechanical Polishing'. Journal of Engineering Manufacture: Imeche (B), . [Details]
Corcoran, A,Sexton, L,Seaman, B,Ryan, P,Byrne, G; (2002) 'The laser drilling of multi-layer aerospace material systems'. Journal of Materials Processing Technology, 123 :100-106. [DOI] [Details]
Hooper, BJ,Byrne, G,Galligan, S; (2002) 'Pad conditioning in chemical mechanical polishing'. Journal of Materials Processing Technology, 123 :107-113. [DOI] [Details]
Murphy, C; Byrne, G; Gilchrist, MD; ; (2002) 'The performance of coated tungsten carbide drills when machining carbon fibre-reinforced epoxy composite materials'. Proceedings of the Institution of Mechanical Engineers Part B-Journal of Engineering Manufacture, 216 (2):143-152. [DOI] Link to full text [Details]
Sexton, L,Lavin, S,Byrne, G,Kennedy, A; (2002) 'Laser cladding of aerospace materials'. Journal of Materials Processing Technology, 122 :63-68. [DOI] [Details]
Barry, J,Byrne, G; (2002) 'TEM study on the surface white layer in two turned hardened steels'. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, 325 :356-364. [DOI] [Details]
Brophy, B,Kelly, K,Byrne, G; (2002) 'AI-based condition monitoring of the drilling process'. Journal of Materials Processing Technology, 124 :305-310. [DOI] [Details]
Murphy, C,Byrne, G,Gilchrist, MD; (2002) 'The performance of coated tungsten carbide drills when machining carbon fibre-reinforced epoxy composite materials'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216 :143-152. [Details]
Barry, J,Byrne, G; (2001) 'Cutting tool wear in the machining of hardened steels Part II: cubic boron nitride cutting tool wear'. Wear, 247 :152-160. [Details]
Barry, J,Byrne, G; (2001) 'Study on acoustic emission in machining hardened steels Part 2: Acoustic emission during continuous chip formation with a non-overlapping cutting arrangement'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215 :1561-1570. [Details]
Beggan, C,Woulfe, M,Young, P,Byrne, G; (1999) 'Using acoustic emission to predict surface quality'. International Journal of Advanced Manufacturing Technology, 15 :737-742. [Details]
Dowling, D. P., Twomey, B. and Byrne, G.; (2010) 'Effect of titanium oxide nanoparticle incorporation into nm thick coatings deposited using an atmospheric pressure plasma'. JOURNAL OF NANOSCIENCE AND NANOTECHNOLOGY, 10 :2746-2752. [Details]
Tynan, J., Law, V. J., Twomey, B. J., Daniels, S., Byrne, G., and Dowling, D. P.; (2009) 'Evaluation of real-time non-invasive diagnostic tools for the monitoring of a pilot scale atmospheric pressure plasma system'. Measurement Science & Technology, 20 (11):115703. [Details]
Halpin, T,Byrne, G,Barry, J,Ahearne, E; (2009) 'The Performance of Polycrystalline Cubic Boron Nitride Tools in Continuous, Semi-interrupted, and Interrupted Hard Machining'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 223 :947-953. [DOI] [Details]
Tynan, J., Ward, P., Byrne, G. and Dowling, D. P.; (2009) 'Deposition of biodegradable polycaprolactone coatings using an in-line atmospheric pressure plasma system'. Plasma Process and Polymers, 6 :S51-S56. [Details]
Twomey, B., Dowling, D. P., Byrne, G., Graham, W., Schaper, L. F., Della Croce, D., Hynes, A. and O'Neill, L.; (2009) 'Comparing Deposition Properties in an Atmospheric Pressure Plasma System Operating in Uniform and Non-uniform Modes'. IEEE Transactions on Plasma Science, 37 (6):961-969. [Details]
Twomey, B., Byrne, G., Hynes, A., O'Neill, L and Dowling, D. P.; (2009) 'Evaluation of the mechanical behaviour of nanometre-thick coatings deposited using an atmospheric pressure plasma system'. Surface Coatings and Technolgy, 203 (14):2021-2029. [Details]
Twomey, B,Dowling, DP,Byrne, G,Graham, WG,Schaper, LF,Croce, DD,Hynes, A,O'Neill, L; (2009) 'Comparing Deposition Properties in an Atmospheric Pressure Plasma System Operating in Uniform and Nonuniform Modes'. IEEE Transactions on Plasma Science, 37 :961-969. [DOI] [Details]
Cotterell, M,Byrne, G; (2008) 'Dynamics of chip formation during orthogonal cutting of titanium alloy Ti-6Al-4V'. CIRP Annals - Manufacturing Technology, 57 :93-96. [DOI] [Details]
Ahearne, E,Byrne, G; (2008) 'Simulation of the local kinematics in rotational grinding'. CIRP Annals - Manufacturing Technology, 57 :333-336. [DOI] [Details]
Twomey, B., Rahman, M., Byrne, G., Hynes, A., O¿Hare, L. A., O¿Neill, L. and Dowling, D. P; (2008) 'Effect of plasma exposure on the chemistry and morphology of aerosol-assisted, plasma-deposited coatings'. Plasma Process and Polymers, 5 :737-744. [Details]
Twomey, B., Dowling, D. P., Byrne, G., O'Neill, L. and O'Hare, L.; (2007) 'Properties of siloxane coating deposited in a reeel-to-reel atmospheric pressure plasma system'. Plasma Process and Polymers, 4 :450-454. [Details]
Tynan, J., Dowling, D. P., Byrne, G., O'Neill, L. and Hughes, D.; (2007) 'Enhancing polymer adhesion through surface activation using an in-line atmospheric pressure plasma'. International Journal of Nanomanufacturing, 1 (4):554-569. [Details]
Dunne, P,Byrne, G; (2004) 'Dimensional accuracy of injection-moulded components produced in an enhanced silicone rubber mould'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218 :51-57. [Details]
Corcoran, A,Roscher, J,Byrne, G; (2004) 'A model for the generation and evaluation of integrated manufacturing solutions for powertrain components'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218 :281-288. [Details]
Ahearne, E,Byrne, G; (2004) 'Ultraprecision Grinding Technologies in Silicon Semiconductor Processing'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218 :253-267. [Details]
Dunne, P,Soe, SP,Byrne, G,Venus, A,Wheatley, AR; (2004) 'Some demands on rapid prototypes used as master patterns in rapid tooling for injection moulding'. Journal of Materials Processing Technology, 150 :201-207. [DOI] [Details]
Kennedy, E,Byrne, G,Collins, DN; (2004) 'A review of the use of high power diode lasers in surface hardening'. Journal of Materials Processing Technology, 155 :1855-1860. [DOI] [Details]
Tuffy, K. and Byrne, G. and Dowling, D.P.; (2004) 'Determination of the optimum TiN coating thickness on WC inserts for machining carbon steels'. Journal of Materials Processing Technologies, 155-156 :1861-1866. [Details]
Mullany, B,Byrne, G; (2003) 'The effect of slurry viscosity on chemical-mechanical polishing of silicon wafers'. Journal of Materials Processing Technology, 132 :28-34. [DOI] [Details]
Barry, J,Byrne, G; (2001) 'Study on acoustic emission in machining hardened steels Part 1: Acoustic emission during saw-tooth chip formation'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215 :1549-1559. [Details]
Barry, J,Byrne, G; (2001) 'Cutting tool wear in the machining of hardened steels Part I: alumina/TiC cutting tool wear'. Wear, 247 :139-151. [Details]
Sexton, CL,Byrne, G,Watkins, KG; (2001) 'Alloy development by laser cladding: An overview'. Journal of Laser Applications, 13 :2-11. [Details]
Barry, J,Byrne, G,Lennon, D; (2001) 'Observations on chip formation and acoustic emission in machining Ti-6Al-4V alloy'. International Journal of Machine Tools and Manufacture, 41 :1055-1070. [Details]
O' Donnell, G.E.,Young, P., Kelly, K., Byrne, G.,; (2001) 'Towards the improvement of Tool Condition Monitoring Systems in the Manufacturing Environemt'. Journal of Materials Processing Technology, 119 :133-139. [Details]
Young, P,Byrne, G,Cotterell, M; (1997) 'Manufacturing and the environment'. International Journal of Advanced Manufacturing Technology, 13 :488-493. [Details]
Ahearne E., Barry J., Byrne G., Halpin T.; (2009) 'The performance of polycrystaline cubic boron nitride tools in continous, semi-interrupted, and interrupted hard machinig'. Journal of Engineering Manufacture: Imeche (B), 223 :947-953. [Details]
Barry, J., Byrne, G. ; (2002) 'TEM study on the surface white layer in two turned hardened steels '. Materials Science and Engineering, 325 :356-364. [Details]
Barry, J., Byrne, G. ; (2001) 'Cutting Tool Wear in the Machining of Hardened Steels Part I: Alumina/TiC Cutting Tool Wear'. Wear, 247 :139-151. [Details]
Barry, J., Byrne, G. ; (2001) 'Cutting Tool Wear in the Machining of Hardened Steels Part II: cubic boron nitride cutting tool wear '. Wear, 247 :152-160. [Details]
Barry, J., Byrne G.; (2001) 'Study on Acoustic Emission in Machining Hardened Steels Part I: Acoustic Emission during Saw Tooth Chip Forrmation '. Journal of Manufacturing Processes, 215 . [Details]
O'Donnell, G., Young, P., Kelly, K., Byrne, G. ; (2001) 'Towards the Improvement of Tool Condition Monitoring Systems in the Manufacturing Environment '. Journal of Materials Processing Technology, 119 :133-139. [Details]
Byrne, G.; (2008) 'High Performance Cutting'. CIRP Journal of Manufacturing Science and Technology, 1 (1):63-63. Available Online [Details]
flavin, R. et al.; (2008) 'A finite-element analysis study of the metatarsophalangeal joint of the hallux rigidus'. Journal of Bone and Joint Surgery-British Volume, 90 (10):1334-1340. [Details]
Tuffy, K. and Byrne, G. and Dowling, D.P.; (2004) 'Determination of the optimum TiN coating thickness on WC inserts for machining carbon steels'. Journal of Materials Processing Technologies, 155-156 :1861-1866. [Details]
Cotterell, M., Byrne, G., ; (2008) 'Dynamics of chip formation during orthogonal cutting of titanium alloy Ti-6Al-4V'. CIRP Annals - Manufacturing Technology, 57 (1):93-96. [Details]
Ahearne, E., Byrne, G., ; (2008) 'Simulation of the Local Kinematics in Rotational Grinding'. CIRP Annals - Manufacturing Technology, 57 (1):333-336. [Details]
G. Byrne., G.E. O'Donnell; (2007) 'An integrated force sensor solution for process monitoring of drilling operations'. Cirp Annals, 56 :89-92. [Details]
Byrne, G, ODonnell, GE, ; (2007) 'An integrated force sensor solution for process monitoring of drilling operations'. CIRP Annals - Manufacturing Technology, 56 :89-92. [Details]
B. Twomey, D. P. Dowling, G. Byrne, L. O'Neill and LA. O'Hare; (2007) 'Properties of siloxane coatings deposited in a reel-to-reel atmospheric pressure plasma system'. Plasma Process and Polymers, 4 :450-454. [Details]
G.E. O'Donnell, G.E., G. Byrne, K. Kelly and A. Kirchheim; (2006) 'Process Monitoring Using Integrated Force Sensors'. Journal of Machine Engineering, 6 (2):56-74. [Details]
Halpin, T, Byrne, G, Barry, J, ; (2005) 'The performance of PCBN in hard turning'. Industrial Diamond Review, -1 (4):52. [Details]
Dunne, P, Soe, SP, Byrne, G, Venus, A, Wheatley, AR, ; (2004) 'Some demands on rapid prototypes used as master patterns in rapid tooling for injection moulding'. Journal of Materials Processing Technology, 150 (3):201-207. [Details]
Kennedy, E, Byrne, G, Collins, DN, ; (2004) 'A review of the use of high power diode lasers in surface hardening'. Journal of Materials Processing Technology, 155 (NA):1855-1860. [Details]
Dunne, P, Byrne, G, ; (2004) 'Dimensional accuracy of injection-moulded components produced in an enhanced silicone rubber mould'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218 (1):51-57. [Details]
Corcoran, A, Roscher, J, Byrne, G, ; (2004) 'A model for the generation and evaluation of integrated manufacturing solutions for powertrain components'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218 (3):281-288. [Details]
Ahearne, E, Byrne, G, ; (2004) 'Ultraprecision grinding technologies in silicon semiconductor processing'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 218 (3):253-267. [Details]
Byrne, G, Dornfeld, D, Denkena, B, ; (2003) 'Advancing cutting technology'. CIRP Annals - Manufacturing Technology, 52 (2):483-507. [Details]
Mullany, B, Byrne, G, ; (2003) 'The effect of slurry viscosity on chemical-mechanical polishing of silicon wafers'. Journal of Materials Processing Technology, 132 (1-3):28-34. [Details]
Sexton, L, Lavin, S, Byrne, G, Kennedy, A, ; (2002) 'Laser cladding of aerospace materials'. Journal of Materials Processing Technology, 122 (1):63-68. [Details]
Barry, J, Byrne, G, ; (2002) 'TEM study on the surface white layer in two turned hardened steels'. Materials Science & Engineering A: Structural Materials: Properties, Microstructure and Processing, 325 (1-2):356-364. [Details]
Hooper, BJ, Byrne, G, Galligan, S, ; (2002) 'Pad conditioning in chemical mechanical polishing'. Journal of Materials Processing Technology, 123 (1):107-113. [Details]
Barry, J, Byrne, G, ; (2002) 'Chip formation, acoustic emission and surface white layers in hard machining'. CIRP Annals - Manufacturing Technology, 51 (1):65-70. [Details]
Murphy, C, Byrne, G, Gilchrist, MD, ; (2002) 'The performance of coated tungsten carbide drills when machining carbon fibre-reinforced epoxy composite materials'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216 (2):143-152. [Details]
Corcoran, A, Sexton, L, Seaman, B, Ryan, P, Byrne, G, ; (2002) 'The laser drilling of multi-layer aerospace material systems'. Journal of Materials Processing Technology, 123 (1):100-106. [Details]
Barry, J, Byrne, G, ; (2001) 'Cutting tool wear in the machining of hardened steels Part II: cubic boron nitride cutting tool wear'. Wear, 247 (2):152-160. [Details]
Barry, J, Byrne, G, Lennon, D, ; (2001) 'Observations on chip formation and acoustic emission in machining Ti-6Al-4V alloy'. International Journal of Machine Tools and Manufacture, 41 (7):1055-1070. [Details]
Barry, J, Byrne, G, ; (2001) 'Cutting tool wear in the machining of hardened steels Part I: alumina/TiC cutting tool wear'. Wear, 247 (2):139-151. [Details]
O'Donnell, G, Young, P, Kelly, K, Byrne, G, ; (2001) 'Towards the improvement of tool condition monitoring systems in the manufacturing environment'. Journal of Materials Processing Technology, 119 (1-3):133-139. [Details]
Barry, J, Byrne, G, ; (2001) 'Study on acoustic emission in machining hardened steels Part 1: Acoustic emission during saw-tooth chip formation'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215 (11):1549-1559. [Details]
Barry, J, Byrne, G, ; (2001) 'Study on acoustic emission in machining hardened steels Part 2: Acoustic emission during continuous chip formation with a non-overlapping cutting arrangement'. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 215 (11):1561-1570. [Details]
Sexton, CL, Byrne, G, Watkins, KG, ; (2001) 'Alloy development by laser cladding: An overview'. Journal of Laser Applications, 13 (1):2-11. [Details]
Kelly, K, Young, P, Byrne, G, ; (1999) 'Modelling the influence of machining dynamics on surface topography in turning'. International Journal of Mechanical Sciences, 41 (4-5):507-526. [Details]
Beggan, C, Woulfe, M, Young, P, Byrne, G, ; (1999) 'Using acoustic emission to predict surface quality'. International Journal of Advanced Manufacturing Technology, 15 (10):737-742. [Details]
Young, P, Byrne, G, Cotterell, M, ; (1997) 'Manufacturing and the environment'. International Journal of Advanced Manufacturing Technology, 13 (7):488-493. [Details]
G. Byrne A. Corcoran; (2004) 'A Model for the Generation and Evaluation of Spatially and Temporally Integrated Manufacturing Processes'. Zeitschrift Fur Metallkunde, ?? (Currently in Prepara):??-??. [Details]
Corcoran, A., Sexton, L., Seaman, B., Ryan, P., Byrne, G.; (2002) 'The Laser Drilling of Multi-layer Aerospace Material Systems '. Journal of Materials Processing Technology, 123 (1):100-106. [Details]
Barry, J., Byrne, G. ; (2002) 'The Mechanisms of Chip Formation in Machining Hardened Steels '. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 124 (3):528-535. [Details]
Barry, J., Byrne G. ; (2001) 'Study on Acoustic Emission in Machining Hardened:Steels Part II: Acoustic Emission during Continuous Chip Forrmation '. Journal of Manufacturing Processes, 215 . [Details]
Hooper, B. J., Galligan, S., Byrne, G. ; (2001) 'Pad Conditioning in Chemical Mechanical Polishing Society of Manufacturing Engineers, . Reference: FC01-321. '. Society of Manufacturing Engineers, . [Details]
Barry, J., Byrne, G. ; (2001) 'Cutting Tool Wear in the Machining of Hardened Steels Part II: Acoustic emission during continuos ship formation with a non-overlapping cutting arrangement '. Journal of Engineering Manufacture, 215 (11):1561-1570. [Details]
Barry, J., Byrne, G. ; (2001) 'Cutting Tool Wear in the Machining of Hardened Steels Part I: Acoustic emission during saw-tooth chip formation '. Proceedings of the Institution of Mechanical Engineers, 215 (11):1549-1559. [Details]
Barry, J. Byrne, G. ; (2001) 'Observations on Chip Formation and Acoustic Emission in Manufacturing Ti-6AI-4V Alloy '. International Journal of Machine Tools and Manufacturin, 41 :1055-1070. [Details]
Sexton, L., Byrne, G., Watkins, K:; (2000) 'Alloy Development by Laser Cladding - An Overview. '. Journal of Laser Applications, . [Details]
Mullany, B., Byrne, G., Young, P.; (1999) 'Pad Wear in Chemical Mechanical Polishinig of Silicon Wafers '. CIRP Annals - Manufacturing Technology, 48 (1). [Details]
Teti, R., Byrne, G., Jemielniak, K., Kumara, R.T., Rehsteiner, F. ; (1998) 'Round Robin on Analysis of Acoustic Emission Monitoring of Machining Co-operative work in STC C, Annals of CIRP Pt II,(containing work of Kumara, R.T.; M.Woulfe). '. CIRP Annals - Manufacturing Technology, . [Details]
Byrne, G.; (1998) 'Total Quality Management in Engineering Education '. Journal of Engineering Education, 23 (4). [Details]
Barry, J., Young, P., Byrne, G.; (1997) 'Analysis of Surface Integrity Generation in AlSi Machining with PCD Tools '. CIRP Annals - Manufacturing Technology, :489-492. [Details]
Byrne, G., Scholta, E. ; (1993) 'Environmentally Clean Machining Processes A: Strategic Approach '. CIRP Annals - Manufacturing Technology, . [Details]
Byrne, G. ; (1992) 'A New Approach to the Theoretical Analysis of the Mechanisms of Surface Generation Mechanisms in Machining '. CIRP Annals - Manufacturing Technology, 41 (1). [Details]
Österle, W., Gesatzke, W., Byrne, G. ; (1991) 'TEM Study on the Effect of Machining on the Microstructure of a Soft Magnetic Ni76Fe17Cu5CrMo2 Alloy '. Zeitschrift Fur Metallkunde, . [Details]
Byrne, G., Bienia, G.; (1991) 'Tool Life Scatter when Milling with TiN Coated Indexible Inserts Annals of the CIRP. Paper to the 41st CIRP General Assembly, Stanford University, USA'. CIRP Annals - Manufacturing Technology, . [Details]
Byrne, G., Bienia, B.; (1990) 'Fräsen von hochzähen Werkstoffen mit beschichtetem HSS'. Zeitschrift Fur Wirtschaftliche Fertigung, . [Details]
Spur, G., Byrne, G., Becker, K., Stark, C., Schäfer, H.; (1990) 'Investigation of the Precision Platen Grinding Process with Hollow Body Abrasive Grinding Belts '. Journal of International Production Engineering, . [Details]
Spur, G., Byrne, G., Hündöl, S. ; (1990) 'Technologie Transfer auf dem Gebiet der Faserverbundkunststoffe '. Zeitschrift Fur Wirtschaftliche Fertigung, . [Details]
Spur, G., Byrne, G., Onikura, H. ; (1989) 'The Machining of Soft Magnetic Materials with TiN-Coated HSS Cutting Tools '. Journal of the Japanese Society of Precision Engineers, . [Details]
Byrne, G.,Tarasinski, N.; (1989) 'Zerspantemperaturen bei der Drehbearbeitung mittels Thermographie bestimmen '. Industrie Anzeiger, 51 (111):40-41. [Details]
Spur, G., Seliger, G., Byrne, G., Holstein, W. ; (1989) 'Entwicklung und Fertigung von Bauteilen aus Faserverbundkunststoffen VDI-Werkstoffwissenschaften November 1989. '. Vdi- Werkstoffwissenschaften, . [Details]
Byrne, G., Vilela, R. ; (1989) 'Comparison between the Engineering Education in Brazil and the Federal Repubic of Germany '. Brazilian Journal of Mechanical Science, . [Details]
Spur, G., Byrne, G., Stark, C. Schäfer, H.; (1989) 'Bandschleifen mit Stützplatte und Kornhohlkugel -Schleifband'. Zeitschrift Fur Wirtschaftliche Fertigung, 84 (9):500-503. [Details]
Spur, G., Byrne, G.; (1988) 'Surface Layer Formation in the Machining of Soft Magnetic Materials Manufacturing Review'. Journal of the American Society of Mechanical Engineers, 1 (1 ):60-67. [Details]
Byrne, G. ; (1987) 'Thermoelectric Signal Characteristics and Average Interfacial Temperatures in the Machining of Metals under Geometrically Defined Conditions '. International Journal of Machine Tools and Manufacturin, 27 (2):215-224. [Details]
Byrne, G.; (1987) 'Engineering Education in the Federal Republic of Germany(in Japanese language). '. Journal of the Japanese Society of Mechanical Engineers, 90 (826):1153-1156. [Details]
Byrne, G.; (1987) 'Drehen weichmagnetischer Werkstoffe mit CVD-beschichteten Werkzeugen '. Industrie Anzeiger, 10 (78):36-37. [Details]
Spur, G., Byrne, G.; (1986) 'Surface Integrity in the Machining of Soft Magnetic Nickel-Iron-Alloys '. Journal of Advanced Manufacturing Processes I, 2 (1):159-194. [Details]
Spur, G., Byrne, G.; (1986) 'Bohren weichmagnetischer Werkstoffe '. Industrie Anzeiger, 108 (101):36-37. [Details]
Spur, G., Özhan, F., Byrne, G.; (1985) 'Fraesen weichmagnetischer Werkstoffe. '. Zeitschrift Fur Wirtschaftliche Fertigung, 80 (2):91-97. [Details]
Tio, T. H., Byrne, G.; (1985) 'Entwicklungstendenzen in der Feinbearbeitung'. Zeitschrift Fur Wirtschaftliche Fertigung, 80 (12):567-572. [Details]
Dunne, P., Soe, S P., Byrne, G., Venus, A., Wheatley, A. R. ; (0) 'New Demands on Rapid Prototypes in Advanced Tooling Technologies '. Journal of Materials Processing Technology, . [Details]
Kelly, K., Young, P., Byrne, G. ; (0) 'Modelling the Influence of Machining Dynamics on Surface Topography in Turning '. International Journal of Mechanical Sciences, 4 (5):507-526. [Details]
Murphy, C., Gilchrist, M., Byrne, G. ; (0) 'The performance of coated tungsten carbide drills when machining carbon fibre-reinforced epoxy composite materials. '. Proceedings of the Institution of Mechanical Engineers, 216 :143-152. [Details]
Byrne, G., Dornfeld, D., Inasaki, I., Ketteler, G., Köenig, W., Teti, R.; (0) 'Tool Condition Monitoring (TCM) - The Status of Research and Industrial Application '. CIRP Annals - Manufacturing Technology, :541-567. [Details]
Barry, J., Byrne, G. ; (0) 'The Mechanisms of Chip Formation in Machining Hardened Steels '. Journal of Manufacturing Science and Engineering, Transactions of the ASME, 124 (3):528-535. [Details]

Other Journals

Law, V.L., Tynan, J., Byrne, G. et al; (2010) 'The Application of Multivariate Analysis Tools for Non-Invasive Performance Analysis of Atmospheric Pressure Plasma' CHAOTIC SYSTEMS Theory and Applications :147-154. [Details]
Halpin T., Byrne G., Barry J., Ahearne E.; (2009) 'The Performance of PCBN Tools in Continuous, Semi-Interrupted and Interrupted Hard Machining' Journal of the Institution of Mechanical Engineers 223 (9) :947-953. [Details]
Byrne, G, Cottell M.; (2009) 'A study of Chip Formation during Orthogonal Cutting of Titanium Alloy Ti-6Al-4V' Special Issue on Manufacturing Technology for Advanced Aerospace Components and Systems 223 . [Details]
Cotterell, M. and Byrne, G. ; (2008) 'Characteristaion of Chip Formation during Orthogonal Cutting of Titanium Alloy Ti-6Al-4V' CIRP Journal of Manufacturing Science and Technology 1 :81-85. [Details]
Byrne, G. et al.; (2004) 'A New Model for the Generation and Evaluation of Spatially and Temporally Integrated Manufacturing Processes' ASME Journal of Manufacturing Science and Engineering . [Details]
O'Donnell, G.E., Byrne, G., Kelly, K. and Kirchheim, A.; (2006) 'Process Monitoring Using Integrated Force Sensors' Journal of Machine Engineering 6 (2) :56-74. [Details]

Conference Publications

O' Donnell, G.E., Byrne,G.; COMPRO Proceedings of the 4th Annual Sir Bernard Crossland Postgraduate Synposium UCD, Nov 2000, , pp.130-131 [Details]
Hartnett, K., Robinson, E., Byrne, G.; (2009) Bearing Design & Development for a Tidal Stream Turbine 12th Annual Sir Bernard Crossland Symposium Queen's University, Belfast, Northern Ireland, , 22-APR-09 - 23-APR-09 , pp.133-133 [Details]
Tynan, J., Law, V.J., Byrne, G., Dowling, D.P. and Daniels, S.; (2009) The application of multivariate analysis tools for non-invasive performance analysis of atmospheric pressure plasma . In: Skidas, C. H eds. 2nd International Conference on Chaotic Modelling, Simulation and Applications, Crete, Greece [Details]
Tynan, J., Law, V. J., Twomey, B., Hynes, A., Daniels, S., Byrne, G. and Dowling, D. P.; (2009) Development of realtime non-invasive performance analysis tools for atmospheric pressure plasma system monitoring International Conference on the Phenomena of Ionised Gases, Cancun, Mexico, 2009 [Details]
Timoney, P.; Byrne, G.: Ahearne E. ; (2009) Contact Pressure Distribution in the Chemical Mechanical Planarization of 450mm Wafers 2010 MRS Spring Meeting [Details]
Tynan, J., Law, V. J., Ward, P., Hynes, A. M., Cullen, J., Byrne, G. and Dowling, D. P.; (2009) Comparison of laboratory and industrial scale atmospheric pressure plasma processsing systems using real-time non-invasive performance analysis tools . In: Reyes, A.M.J eds. 19th International Conference on the Phenomena of Ionised Gases, Cancun, Mexico, 2009 [Details]
Law, V. J., O'Connor, N., Twomey, B., Tynan, J., Byrne, G., Dowling D. P. and Daniels, S.; (2008) Multivariate analysis of an industrial atmospheric pressure plasma electrical parameters . In: Overzet, L eds. 61st Annual Gaseous Electronics Conference, Dallas, Texas, USA, 13-17 October, 2008 , 13-OCT-08 - 17-OCT-08 [Details]
Graham, W. G., Della Croce, D., Hynes, A., O'Neill, L., Dowling, D. P., Twomey, B. and Byrne, G.; (2007) Electrical and emission tudies of a large area, uniform dielectric barrier discharge operation in polymer film processing mode 28th ICPIG, Prague, Czech Republic, July 2007 [Details]
Timoney, P. and Ahearne, E. and Byrne, G.; (2006) Poster: An Introduction to Chemical Mechanical Planarisation Intel Conference Leixlip, Ireland, , 03-SEP-06 [Details]
Logan, D., Ahearne, E., Byrne, G.; (2006) Piezo-electric Drive Systems in Ultra-Precision Machines: A Review of the State-of-the-Art' Proceedings of the 23rd International Manufacturing Conference Belfast, , 30-AUG-06 - 01-SEP-06 [Details]
Gangawane, M., Ahearne, E., Byrne, G.; (2006) Measurement of Locally Varying Forces in Rotational Grinding 6th International Conference of The European Society for Precision Engineering and Nanotechnology Baden bei Wien, Austria, , 28-MAY-06 - 01-JUN-06 [Details]
Gangawane, M., Ahearne, E., Byrne, G.; (2006) Development of a Sensor Integrated Tool for Rotational Grinding' Poster Presentation 9th Annual Sir Bernard Crossland Symposium TCD, Dublin, [Details]
Dowling, D., Miller, I., Duggan, P., Byrne, G., Gallagher, W.; (2006) Influence of the surface properties of plasma modified polystyrene on cell morphology and spreading SVC 49th Annual Technical Conference Proceedings [Details]
Tynan, J., Dowling, D.P., Byrne, G., Hughes, D.; (2006) Enhancing Polymer Adhesion through Surface Activation using an in-line Atmospheric Pressure Plasma Proceedings of the 23rd International Manufacturing Conference Belfast, , 30-AUG-06 - 01-SEP-06 [Details]
Twomey, B., Dowling, D., Byrne, G.; (2006) Deposition of Functional Coatings using an Atmospheric Pressure Plasma System Poster Presentation 9th Annual Sir Bernard Crossland Symposium TCD, Dublin, [Details]
Gangawane, M., Ahearne, E., Byrne, G.; (2006) Development of a Sensor Integrated Tool for Rotational Grinding' Poster Presentation 9th Annual Sir Bernard Crossland Symposium TCD, Dublin, [Details]
Tynan, J., Dowling, D. P., Hughes, D. and Byrne, G.; (2006) Enhancing polymer adhesion through surface activation using an in-line atmospheric pressure plasma . In: Harris, E.M.J. et al eds. 23rd International Manufacturing Conference, University of Ulster, Belfast, 2006 Universtity of Ulster, Belfast, Northern Ireland, , 28-AUG-06 - 01-SEP-06 [Details]
Twomey, B., Dowling, D. P., Byrne, G., O'Neill, L and O'Hare, L.A; (2006) Properties of siloxane coating deposited in a reel-to-reel atmospherica pressure plasma system 10th International Conference on Plasma Surface Engineering PSE 2006 [Details]
Halpin, T., Byrne, G.; (2005) Interrupted Hard Turning', Poster Presentation 8th Annual Sir Bernard Crossland Symposium Queens University Belfast, [Details]
Byrne, G.; (2005) High Performance Cutting- An Energy and Environmental Perspective 2nd International Symposium on Ecological Challenge in Manufacturing Systems Keio University, Japan, , 01-SEP-05 [Details]
Twomey, B., Dowling, D., Byrne, G.<, O'Neill L., O'Hare, L.A; (2005) Coatings deposited using a reel to reel atmospheric plasma system published in the proceedings of the 2nd International Workshop on Cold Atmospheric Plasmas: Sources and Applications (CAPPSA) Bruges Belgium, , 30-AUG-05 - 02-SEP-05 [Details]
Twomey, B., Dowling, D., Byrne, G., O'Neill L., O'Hare, L.A; (2005) Coatings deposited using a reel to reel atmospheric plasma system 2nd International Workshop on Cold Atmospheric Plasmas: Sources and Applications (CAPPSA) Bruges Belgium, , 30-AUG-05 - 02-SEP-05 [Details]
Halpin, T., Byrne, G., Barry, J.; (2005) The Performance of PCBN in Hard Turning Industrial Diamond Review [Details]
Dowling, D. P., Twomey, B., Byrne, G., O'Neill, L. and O'Hare, L.A.; (2005) Deposition of functional coating using an in-line atmospheric pressure plasma apparatus SVC 48th Annual Technical Conference, Denver, April 2005 [Details]
Tuffy, K., Byrne, G., Dowling, D.; (2003) Analysis of Optimum TiN Film Coating Thichness deposited on WC Cutting Tools using Magnatron Sputtering AMPT Conference Paper *, [Details]
Tuffy, K., Byrne, G., Dowling, D. ; (2003) Design of the Optimum Machining Conditions for Coated WC Inserts Using the Taguchi Method International Manufacturing Conference (IMC-20) Cork Institute of Technology Cork, , pp.280-287 [Details]
Byrne, G, Timoney P., Ahearne E.; (2009) Contact Pressure Distribution in the Chemical Mechanical Planarization of 450mm Wafers The Materials Research Society 2010 Spring Meeting [Details]
Cotterell, M. and Byrne, G. ; (2008) Characteristaion of Chip Formation during Orthogonal Cutting of Titanium Alloy Ti-6Al-4V 3rd CIRP International Conference on High Performance Cutting Dublin, Ireland, , 12-JUN-08 - 13-JUN-08 , pp.483-497 [Details]
Ruddy, C. et al.; (2006) Poster: Finite Element Modelling of the von Mises Stress Distribution in Chemical Mechanical Polishing 4th Annual Intel Ireland Research Conference, Intel Leixlip, Ireland, , 10-SEP-06 - 10-SEP-06 [Details]
Kennedy, E. and Byrne, G. and Byrne, R.; (2004) Laser Hardening Integrated into Conventional Machine Tools Laser Assisted Net Shape Engineering (LANE) 2004 Conference Erlangen, Germany, , 21-SEP-04 - 24-SEP-04 [Details]
D. Logan, E. Ahearne and G. Byrne; (2006) Piezo-electric Drive Systems in Ultra-Precision Machines: A Review of the State-of-the-Art 23rd International Manufacturing Conference Belfast, , 30-AUG-06 - 01-SEP-06 [Details]
Kennedy, E. and Byrne, G.; (2004) Laser Hardening on an Integrated Manufacturing Cell 7th Annual Sir Bernard Crossland Symposium DCU, Dublin, Ireland, , 03-MAR-04 - 05-MAR-04 [Details]
Ahearne, E. and Byrne, G.; (2008) Meso-scale Kinematical Simulation of the Rotational Grinding Process 10th International Conference of euspen Zurich, Switzerland, , 18-MAY-08 - 22-MAY-08 , pp.73-77 [Details]
Halpin, T. and Byrne, G. and Barry, J.; (2008) The Performance of PCBN in Interrupted and Semi-Interrupted Machining 3rd CIRP International Conference on High Performance Cutting University College Dublin, , 12-JUN-08 - 13-JUN-08 , pp.483-497 [Details]
Ahearne, E. and Byrne, G.; (2008) Rotational Grinding Meso-Scale Engagement Mechanics 3rd CIRP International Conference on High Performance Cutting University College Dublin, , 12-JUN-08 - 13-JUN-08 , pp.629-642 [Details]
O' Donnell, G.E., Byrne, G., Kelly, K., Kirchheim, A.; An Integrated Sensing Solution for monitoring a flexible Machining Centre Proceedings of the International Conference on Competitive Manufacturing (2001) Dublin, , pp.331-340 [Details]
O' Donnell, G.E., Byrne, G., Kelly, K.; Use of a sensor Integrated Motor Spindle for Monitoring of a flexible Maching Centre Proc. 2nd International Seminar on Intelligent Computation in manufacturing Engineering (2000) Capri, Italy, , pp.383-388 [Details]
O' Donnell, Young, P., G.E., Byrne, G., Kelly, K.,; Towards the Improvement of Tool Condition Monitoring in the Manufacturing Environemt Proc. Int. Conf. on Advances in Material & Processing Technologies, AMPT'99 & IMC16 (1999) Dublin, , pp.595-604 [Details]
Robinson, E. and Byrne, G.; (2008) On the Performance of an Open-Centre Tidal Turbine 11th Annual Sir Bernard Crossland Symposium University of Limerick, , pp.169-169 [Details]
Byrne, G.; (2008) High Performance Cutting, an Environmental and Energy Perspective 3rd CIRP International Conference on High Performance Cutting University College Dublin, Dublin, Ireland, , 12-JUN-08 - 13-JUN-08 , pp.317-327 [Details]
Fiorini, P.V. and Byrne, G. and Ahearne, E.; (2008) Energy Efficient High Performance Cutting of Grey Cast Iron The 25th International Manufacturing Conference Dublin Institute of Technology, Bolton St., Dublin, Ireland, , 03-SEP-08 - 05-SEP-08 [Details]
Robinson, E. and Harnett, K. and Byrne, G.; (2008) Predicting Annual Outputs for Tidal Turbine Technology World Renewable Energy Congress X Glasgow, Scotland, , 19-JUL-08 - 25-JUL-08 [Details]
Byrne, G. and Robinson, E.; (2008) Methodology for Modeling Tidal Turbine Characteristics.¿ OCEANS 08 Quebec City, Canada, , 15-SEP-08 - 18-SEP-08 [Details]
Timoney, P. et al.; (2008) Modelling Loop Stiffness in Chemical Mechanical Polishing (CMP) Intel European Research and Innovation Conference (ERIC 2008) Leixlip, Ireland, , 10-SEP-08 - 12-SEP-08 [Details]
D.Logan, E.Ahearne, D.Sohn and G.Byrne ; (2007) Model of Displacement Induced Local Forces in Rotational Grinding 7th International Conference of The European Society for Precision Engineering and Nanotechnology Bremen, , 20-MAY-07 - 24-MAY-07 , pp.89-92 [Details]
P. Timoney, E. Ahearne and G. Byrne; (2007) Modelling Compliance in Chemical Mechanical Planarisation 7th International Conference of The European Society for Precision Engineering and Nanotechnology Bremen, , 20-MAY-07 - 23-MAY-07 [Details]
C. Ruddy, E. Ahearne and G. Byrne ; (2007) Force Application in Chemical Mechanical Planarisation 7th International Conference of the European Society for Precision Engineering and Nanotechnology Bremen, , 20-MAY-07 - 24-MAY-07 [Details]
B. Twomey, D.P. Dowling, G. Byrne, M. Rahman, A. Hynes, L.A. O'Hare and L. O'Neill; (2007) Evaluation of the mechanical behaviour of nanometre-thick coatings deposited using an atmospheric pressure plasma system 50th Annual Technical Conference Louisville Kentucky, [Details]
P. Timoney, E. Ahearne and G. Byrne; (2007) Chemical Mechanical Planarisation of Damascene Architecture Substrates 24th International Manufacturing Conference Waterford, , 28-AUG-07 - 31-AUG-07 [Details]
P. Stringer, G. Byrne and E. Ahearne; (2007) Tool Design for Burr Removal in Drilling Operations International Manufacturing Conference (IMC) 24 Waterford, , pp.999-1005 [Details]
W.G. Graham, D.Della Croce, A.M. Hynes, L. O'Neill, D. Dowling, B Twomey and G. Byrne; (2007) Electrical and emission studies of a large area, uniform dielectric barrier discharge operating in polymer film processing mode 28th ICPIG Prague, , 10-JUL-07 - 20-JUL-07 [Details]
C. Ruddy, E. Ahearne and G. Byrne; (2007) A review of magnetorheological elastomers: properties and applications The 24th International Manufacturing Conference Waterford, , 29-AUG-07 - 31-AUG-07 [Details]
H. Dalton, G. Byrne and M. Steinicke; (2006) Evaluation of a model for the prediction of milling stability for thin-walled components 23rd International Manufacturing Conference Belfast, , 30-AUG-06 - 01-SEP-06 [Details]
Brophy, B, Kelly, K, Byrne, G, ; (2002) JOURNAL OF MATERIALS PROCESSING TECHNOLOGY AI-based condition monitoring of the drilling process , pp.305-310 [Details]
Beggan, C., Woulfe, M., Young, P., Byrne, G. ; Analysis of Acoustic Emission in Turning High Quality Surfaces Proceedings of the 15th Conference of the Irish Manufacturing Committee, September 1998 *, , pp.475-483 [Details]
Mullany, B., Young, P., Byrne, G., Galligan, S., Power, M. ; FEM Analysis of Pad Conditions in the Chemical Mechanical Polishing of Silicon Wafers Proceedings of the 15th Conference of the Irish Manufacturing Committee, September 1998 *, , pp.37-44 [Details]
Barry, J., Byrne, G., Cregg, B., Cottell, D. C. ; Quantitative Electron Stereo-Microscopy 21st Annua1 symposium of the Irish Microscopical Society. National University of Ireland Galway (NUI-G), September 1998 *, [Details]
Dunne, P., Soe, S., Byrne. G., Venus, A., Wheatley, A. ; New Demands on Rapid prototypes in Advanced Tooling Technologies Foundation for Production Research. August 1999 University of Limerick Limerick, [Details]
Byrne, G., Bienia, B. ; Wear Resistant Coatings for Cutting Tools Fourth International Conference on Surface Modification Technologies, Societe Francaise de Metallurgie, November 1990, Paris Paris, [Details]
Barry, J., Young, P., Byrne, G. ; Surface Integrity of AlSi9 Alloy Machined with Polycrystalline Diamond Tools Proceedings of the 13th Conference of the Irish Manufacturing Committee, Limerick, September 1996 Limerick, , pp.395-404 [Details]
Byrne, G., Cotterell, M. ; Environmentally Clean Machining - A Strategic Approach Proceedings of the 14th Conference of the Irish Manufacturing Committee, 1997. *, , pp.23-32 [Details]
Mullany, B., Byrne, G., Young, P., Galligan, S. ; Global Planarity of Silicon Wafers resulting from Chemical Mechanical Polishing Proceedings of the 14th Conference of the Irish Manufacturing Committee, 1997 *, , pp.451-459 [Details]
Spur, G., Byrne, G. ; Flexible Automation for the Small to Medium Sized Enterprises European Seminar, Eolas, Dublin, Ireland, June 1988 Dublin, [Details]
Spur, G., Byrne, G. ; The Surface Layer Formation in the Machining of Soft Magnetic Materials IMC-IV Conference in NIHE, Limerick, Ireland, September 1987 Limerick, Ireland, [Details]
Spur, G., Byrne, G. ; The Machinability of Soft Magnetic Nickel-Iron Alloys Proceedings of the Irish Manufacturing Conference IMC - 3, University College Galway, Ireland, September 1986 University College Galway, Ireland, [Details]
Byrne, G., el Baradie, M. ; Factors Influencing the Efficiency of Finish Machining Operations Proceedings of the First Irish Durability and Fracture Conference, Trinity College Dublin, 1983, Trinity College Dublin, , pp.305-322 [Details]
Murphy, C., Young, P., Byrne, G., Gilchrist, M. ; (1998) Influence of Tool Wear on Torque and Thrust Force when Drilling Fibre-Reinforced Composites Materials Proceedings of the 15th Conference of the Irish Manufacturing Committee *, , pp.27-34 [Details]
Mc Clenaghan, K., Kelly, K., Young, P. Byrne, G. ; Development of New Tool Condition Monitoring Strategies for Drilling Proceedings of the 15th Conference of the Irish Manufacturing Committee, September 1998 *, , pp.531-540 [Details]
Dunne, P., Tansey, T. Young, P.; Byrne, G ; Prototyping Techniques for Predicting the Performance of Injected Moulded Components Proceeding of the 14th Conference of the Irish Manufacturing Committee, 1997 *, , pp.743-751 [Details]
Kelly, K., Young, P., Byrne, G. ; Modelling of Surface Integrity of AlSi9Cu3 in Finish Machining Proceedings of the 14th Conference of the Irish Manufacturing Committee, 1997 *, , pp.173-182 [Details]
Mullaney, B., Byrne, G. ; Pad-Wafer Interface Temperatures during Chemical Mechanical Polishing (CMP) of Oxide Coated Silicon Wafers Abstract for EUSPEN Conference, Eindhoven 2002. Eindhoven, [Details]
Ahearne, E.; Byrne, G.; O Ceallaigh, M.: ; (2003) Surface and Near Surface Characterisation of Microground Silicon Substrates Proceedings of the International Manufacturing Conference IMC 20, 2003 *, , pp.779-786 [Details]
Kennedy, E., Byrne, G. ; The Integration of a High Power Dioxide Laser into a Conventional Machining Centre Proceedings of the International Manufacturing Conference IMC 20, 2003 *, , pp.517-523 [Details]
Tuffy, K., Byrne, G., Dowling, D. ; (2003) Design of the Optimum Machining Conditions for Coated WC Inserts Using the Taguchi Method 20th International Manufacturing Conference (IMC-20) Cork Institute of Technology,2003 Cork, , pp.280-287 [Details]
Byrne, G., Ahearne, A. ; High Performance Cutting Proceedings of the Fourth International Workshop on High Performance Cutting, Paris, January 2004 (G. Byrne, Workshop Chairman) Paris, [Details]
Byrne, G., Dornfeld, D., Denkena, B. ; Advancing Cutting Technology CIRP Scientific Technical Committee C Keynote Address, General Assembly, Montreal, August 2003. (Presented by Byrne). Presented again in Tokyo November 2003. Tokyo, [Details]
Evans, C.J., Paul, E., Dornfeld, D., Lucca, D.A., Byrne, G., Tricard, M., Klocke, F., Dambon. O., Mullany, B.A. ; Material Removal Mechanisms in Lapping and Polishing CIRP Scientific Technical Committee G Keynote Paper Montreal, August 2003. (Presented by Evans). Montreal, [Details]
Byrne, G., Kennedy, E., Collins, D. ; A Review of the Use of High Power Dioxide Lasers in Surface Hardening. AMPT 2003 Conference Paper. *, [Details]
Byrne, G. ; Product and Process Development for the Automotive Component Supplier Industry in Ireland - A University Perspective Seminar organised by the Irish Business and Employers Confederation (IBEC) at University College Dublin, 2nd June, 1994. University College Dublin, [Details]
Dunne, P., Byrne, G. ; The Effect of Mould Heating on the Accuracy of Rapid Tooling. Proceedings of the 16th International Conference Computer Aided Production Engineering (CAPE) 2000, -Published by the IMechE University of Edinburgh, August 2000. Edinburgh, , pp.565-574 [Details]
Spur, G., Byrne, G., Onikura, H. ; The Machining of Soft Magnetic Materials with TiN Coated HSS Tools Paper to the Japanese Society for Precision Engineering (in Japanese language). Muyazaki-City, Japan, Nov. 1988 (presented by Onikura) Muyazaki-City, [Details]
Spur, G., Byrne, G. ; The Machinability of Soft Magnetic Materials CIRP-International Conference, Tbilisi, June 1988. Tbilisi, [Details]
Spur, G., Byrne, G. ; The Machinability of Soft Magnetic Materials SME - NAMRC XV Conference, USA, May 1987, Proceedings USA, , pp.523-530 [Details]
Tuffy, K., Byrne, G., Dowling, D.; (2003) Analysis of Optimum TiN Film Coating Thichness deposited on WC Cutting Tools using Magnatron Sputtering AMPT 2003 Conference Paper *, [Details]
Barry, J., Byrne, G. ; Overview/Summary of work done in UCD on Hard Tuning [title of paper to be decided] Intertech 2003 Industrial Diamond Conference, Canada, 2003 Paper in preparation. Canada, [Details]
Byrne, G., Ahearne, A. Introductory Presentation. ; High Performance Cutting Proceedings of the Third International Workshop on High Performance Cutting, Paris, January 2003 (G. Byrne, Workshop Chairman). Paris, [Details]
Byrne, G., Ahearne, A. Introductory Presentation. ; High Performance Cutting Proceedings of the Second International Workshop on High Performance Cutting, San Sebastian, August 2002 (G. Byrne, Workshop Chairman). San Sebastian, [Details]
Byrne, G., Ahearne, A. ; High Performance Cutting. Introductory Presentation Proceedings of the First International Workshop on High Performance Cutting, Paris, January 2002 (G. Byrne, Workshop Chairman). Paris, [Details]
Mullany, B., Byrne, G.. ; The Effect of Slurry Viscosity on CMP VMIC Conference, USA, June 2000. USA, [Details]
O'Donnell, G., Kelly, K., Byrne, G. ; Knowledge Acquisition and Management within Integrated Process Monitoring Systems Third World Congress on Intelligent Processes and Systems, Turin, 2000. Turin, [Details]
McCleneghan, K., Kelly, K., Byrne, G. ; Tool Condition Monitoring - An Algorithm for Breakage Detection International Conference on Intelligent Manufacturing Systems. K.U. Leuven, September 1999. Leuven, [Details]
Dunne, P., Byrne, G., Soe, S.P., Venus, A. ; Rapid Toolings Requirement of Rapid Prototyping Processes 15th International Conference on Production Research. August 1999, Limerick, Ireland. Limerick, [Details]
Dunne, P., Byrne, G., Soe, S.P., Venus, A. ; Rapid Toolings Requirement of Rapid Prototyping Processes 15th International Conference on Production Research. August 1999, Limerick, Ireland. Limerick, Ireland, [Details]
Barry, J., Byrne, G. ; Acoustic Emission in Hard Turning International Conference on Advances in Materials and Processing Technologies, AMPT'99, August 1999 *, , pp.613-622 [Details]
O'Donnell, G., Young, P., Kelly, K., Byrne, G. ; Towards the Improvement of Tool Condition Monitoring Systems in the Manufacturing Environment International Conference on Advances in Materials and Processing Technologies, AMPT ' 99 Volume I, August 1999. *, , pp.595-604 [Details]
ODonnell, G. E.; Byrne, G., Kelly, K., Kirchheim, A. ; An Integrated Sensing Solution for the Monitoring of a Flexible Machining Centre Proceedings of the International Manufacturing Conference (IMC) 18, September 2001. UCD, , pp.331-340 [Details]
Brophy, B.; Kelly, K., Byrne, G. ; Anomaly Detection in Drilling Using Neural Networks Proceedings of the International Manufacturing Conference (IMC) 18, UCD, September 2001. UCD, , pp.321-329 [Details]
Beggan, C., Woulfe, M., Young, P., Byrne, G. ; Acoustic Emission Surface Quality Sensor System, AC 98 5th International Conference on Monitoring and Automatic Supervision in Manufacturing, Warsaw, 1998. Warsaw, [Details]
Barry, J., Byrne, G. ; Ceramic and CBN Cutting Tool Wear in Finish Turning of Hardened EN 24 Steel 4th International Conference on Behaviour of Materials in Machining, U.K. November 1998. *, [Details]
Gallagher, D., Byrne, G., Neary, J. ; Automation in Functional Tests on Computer Motherboards Proceedings of International TEST Conference, October 1998, UK. *, [Details]
Beggan, C., Woulfe, M., Young, P., Byrne. G. ; Acoustic Emission Surface Quality Sensor System, AC 98 5th International Conference on Monitoring and Automatic Supervision in Manufacturing, Warsaw, 1998. Warsaw, [Details]
Byrne, G. ; Total Quality Management in Engineering Education Conference of CESAER, Delft University of Technology, November 1997. (Presented by Byrne) Delft University of Technology, [Details]
Mullany, B., Young, P., Byrne, G. ; Chemical Mechanical Polishing of Silicon Wafers and their resulting Global Planarity Intel European Academic Forum, July, 1997. *, [Details]
Corcoran, A., Sexton, L., Seaman, B., Byrne, G. ; Percussion Laser Drilling of Multi-layer Systems in Jet Engine Components Proceedings of the 16th International Conference on Computer Aided Production Engineering (CAPE) 2000, Published by the IMechE University of Edinburgh, August 2000. Edinburgh, , pp.145-154 [Details]
Corcoran, A., Sexton, L., Byrne, G. ; The Laser Drilling of Multi-Layer Systems in Jet Engine Components Proceedings of the 16th International Conference on Computer Aided Production Engineering, University of Edinburgh, August 2000. Edinburgh, [Details]
Dunne, P., Byrne, G. ; The Effect of Mould Heating on the Accuracy of Rapid Tooling Proceedings of the 16th International Conference on Computer Aided Production Engineering, University of Edinburgh, August 2000. Published by IMechE. Edinburgh, [Details]
Byrne, G. ; Research and Development in Tool Condition Monitoring CIRP/VDI Conference, Duesseldorf, Germany, March 1995 Duesseldorf, Germany, [Details]
Byrne, G. ; Manufacturing Technology of the Future A European Perspective Conference on Manufacturing of the Future, Industrial Promotions Centre, Kobe, Japan, 4th November, 1994. Kobe, Japan, [Details]
Byrne, G. ; Environmentally Clean Machining Processes 6th International Machine Tool Engineers Conference (IMEC), organised by Japan Machine Tool Builders Association (JMTBA), Japan, October/November, 1994. Japan, [Details]
Byrne, G. ; Chip Breaking in Industrial Machining - Results of Tests with a High Pressure Water Jet System Internatikonal Conference on Chip Control, 41st CIRP General Assembly, August 1991, Stanford University, USA Stanford University, USA, [Details]
Dunne, P., Young, P., Byrne, G. ; Improving the Accuracy of Rapid Tooling for Design Evaluation Proceedings of the 1999 CIRP International Design Seminar, University of Twente, Enschede, The Netherlands, March 1999 University of Twente, Enschede, The Netherlands, , pp.395-404 [Details]
Mullany, B., Byrne, G. ; Variations of Polishing pad intrinsic properties due to wear and their effect on CMP planarity capabilities EUSPEN Conference Bremen, Germany, 1999. Bremen, Germany, [Details]
Mullany, B., Byrne, G., Power, M. ; The effect of polishing pad conditioning on the planarisation capability of the Chemical Mechanical Polishing process CMP-MIC Conference, February 1999, Santa Clara. Santa Clara, [Details]
Murphy, C., Gilchrist, M. D., Byrne G.; (2001) A Qualitative Investigation of the Drilling Induced Damage of Carbon Fibre Reinforced Epoxy Composites Proceedings of the International Manufacturing Conference (IMC) 18 UCD, , pp.193-202 [Details]
Mullaney, B., Byrne, G. ; The Effect of Slurry Viscosity on Chemical Mechanical Polishing (CMP) of Silicon Wafers Proceedings of the International Manufacturing Conference (IMC) 18,UCD, September 2001.Also accepted for publication in the Journal of Materials Processing Technology. UCD, , pp.113-122 [Details]
Hooper, B. J., Byrne, G., Galligan, S. ; Pad Conditioning in Chemical Mechanical Polishing Proceedings of the International Manufacturing Conference (IMC) 17, National University of Ireland, Galway, August 2000 Galway, , pp.127-136 [Details]
Sexton, L., Lavin, S., Byrne, G., Kennedy, A. ; Laser Cladding of Aerospace Materials Proceedings of the International Manufacturing Conference (IMC) 17 National University of Ireland, Galway, August 2000 Galway, , pp.591-598 [Details]
Corcoran, A., Sexton, L., Seaman, B., Ryan, P., Byrne, G. ; The Laser Drilling of Multi-layer Aerospace Material Systems Proceedings of the International Manufacturing Conference (IMC) 17 National University of Ireland, Galway, August 2000 Galway, , pp.87-96 [Details]
Spur, G., Byrne, G. ; A Theoretical Analysis of the Surface Generation Mechanisms in Cylindrical Turning Fifth Conference of the Irish Manufacturing Committee, Queens University of Belfast. September 1988. Proceedings Queens University of Belfast, , pp.515-534 [Details]
Kelly, K., Young, P., Byrne, G. ; Modelling of Surface Integrity Generation in Single Point Turning Proceedings of the 13th Conference of the Irish Manufacturing Committee, Limerick, September 1996 Limerick, , pp.385-393 [Details]
Woulfe. M., Byrne, G. ; An Analysis of Acoustic Emission for Monitoring the Turning Process Irish Manufacturing Conference, Limerick, September 1996 Limerick, , pp.375-384 [Details]
Byrne, G., Kelly, K. ; Enhancing the reliability of manufacturing processes through monitoring and modeling Motorola Hermes Symposium, Malahide, Co. Dublin, 25th May 2000. Malahide, [Details]
Barry, J., Cottell, D., Byrne, G. ; Transmission Electron Microscopy Study of the Microstructural Deformation in Machinin Hardened Steel Surfaces Microscopical Society of Ireland. Annual Symposium, August 1999. *, [Details]
Dunne, P., Young, P., Byrne, G. ; Dimensional Stability in Rapid Tooling Processes Proceedings of the 15th Conference of the Irish Manufacturing Committee, September 1998 *, , pp.485-494 [Details]
Dalton, H., Byrne, G., Steinicke, M.; (2006) Evaluation of a model for the prediction of milling stability for thin-walled components Proceedings of the 23rd International Manufacturing Conference Belfast, , 31-AUG-06 - 01-SEP-06 [Details]
Logan, D., Ahearne, E., Byrne, G.; (2006) Piezo-electric Drive Systems in Ultra-Precision Machines: A Review of the State-of-the-Art Proceedings of the 23rd International Manufacturing Conference Belfast, , 30-AUG-06 - 01-SEP-06 [Details]
Gangawane, M., Ahearne, E., Byrne, G.; (2006) Measurement of Locally Varying Forces in Rotational Grinding 6th International Conference of The European Society for Precision Engineering and Nanotechnology Baden bei Wien, Austria, , 28-MAY-06 - 01-JUN-06 [Details]
Barry, J., Byrne, G. ; (2002) Chip Formation, Acoustic Emission and Surface White Layers in Hard Machining CIRP General Assembly, San Sebastian, Spain, August 18th 25th 2002.CIRP Annals 2002 San Sebastian, Spain, , 18-AUG-02 - 25-AUG-02 , pp.65-70 [Details]
Byrne, G., ODonnell, G., Kelly, K. ; (2001) Technical Report Summary: COMPRO Compensation for Stochastic Deviations in Process Monitoring for Flexible Production Systems CIRP January 2001 Scientific Technical Committee C Meeting, Paris, 25th January 2001. Paris, , 25-JAN-01 [Details]
Mullaney, B., Byrne, G., Evans, C. ; (2001) An Overview of Infra-red Thermal Images taken during Chemical Mechanical Polishing (CMP) CIRP January 2001Scientific Technical Committee G Meeting, Paris, 25th January 2001. Paris, , 25-JAN-01 [Details]
Corcoran, A., Sexton, L., Seaman, B., Ryan, P., Byrne, G. ; (2000) The Laser Drilling of Multi-Layer Rene80 and Systems ICALEO Conference, Michigan 3rd to 5th October 2000. Michigan, , 03-OCT-00 - 05-OCT-00 [Details]
O'Donnell, G., Kelly, K., Byrne, G. ; (2000) Use of a Sensor Integrated Motor Spindle for Monitoring a Flexible Machining Center. 2nd CIRP International Seminar on Intelligent Computation in Manufacturing Engineering. ICME 2000. June 21 23rd 2000, Capri, Italy Capri, Italy , , 21-JUN-00 - 23-JUN-00 [Details]
Brophy, B., Kelly, K., Byrne, G. ; (1999) Anomaly detection in drilling using neural networks Proceedings of the 2nd International Workshop on Intelligent Manufacturing Systems 1999. 22nd-24th September 1999. Leuven, Belgium Leuven, Belgium, , 22-SEP-99 - 24-SEP-99 [Details]
Mullany, B., Byrne, G., Young, P. ; (1998) Effect of Polishing Pad Wear on the Chemical Mechanical Polishing of Silicon Wafers Proceedings of the 15th Conference of the International Manufacturing Committee, University of Ulster, Jordanstown, 2nd-4th September 1998. University of Ulster, Jordanstown, , 02-SEP-98 - 04-SEP-98 [Details]
Byrne, G. ; (1998) Quality Assessment in Engineering Education Proceedings of Conference on Engineering Education Institution of Engineers of Ireland, Dublin, 12th 13th March 1998. Dublin, , 12-MAR-98 - 13-MAR-98 [Details]
Kelly, K., Young, P., Byrne, G. ; (1997) Modelling of Machine Dynamics using Digital Signal Processing Techniques Institute of Physics, Proceedings of the 3rd International Conference on Modern Practice in Stress and Vibration Analysis, Dublin, Ireland, 3rd 5th September 1997 Dublin, , 03-SEP-97 - 05-SEP-97 , pp.241-248 [Details]
Woulfe, M., Byrne, G. ; (1997) A Theoretical and Experimental Analysis of Acoustic Emission applied to Monitoring Surface Quality in he Turning Process. The Second World Congress on Intelligent Manufacturing Processes and Systems, Budapest, 10th - 13th June 1997 Budapest, , 10-JUN-97 - 13-JUN-97 , pp.8-13 [Details]
Byrne, G. ; (1994) Technological Development in Manufacturing Industry - The Irish Infrastructure Symposium on Global and System Sourcing, Irish Trade Board, Stuttgart,Germany, 19th May 1994. Stuttgart,Germany, , 19-MAY-94 [Details]
Byrne, G. ; (1994) Expectations of IT Users especially SMEs Advanced Information Technology Forum Expectations of IT Users especially SMEs Advanced Information Technology Forum Brussels. Organisers: EU. 28th April 1994. Brussels, , 28-APR-94 [Details]
Byrne, G. . ; (1994) Technology and Innovation - The Route to the Future IEI Seminar, Bord na Mona, Newbridge, 23rd March 1994 Newbridge, , 23-MAR-94 [Details]
Byrne, G. ; (1994) A New Technological Challenge for the Ecofactory of the Future Seminar on Environmentally Clean Manufacturing Processes - A New Technological Challenge for the Ecofactory of the Future The Queens University Belfast, , 16-MAR-94 [Details]
Byrne, G. ; (1993) Engineering Skills in a Rapidly Changing Industrial and University Environment Workshop organised by The Euroform Programme, Dublin, Ireland, 26th November, 1993, University College Dublin. Dublin, , 26-NOV-93 [Details]
Byrne, G. ; (1993) Berkeley Conference on the Culture of Engineering in a Rapidly Changing World Green Manufacturing. Berkeley Conference on the Culture of Engineering in a Rapidly Changing World9th November, 1993, University of California, Berkeley, U.S.A. University of California, Berkeley, U.S.A. , , 09-NOV-93 [Details]
Byrne, G. ; (1993) Limitations of Tool Condition Monitoring Systems in an Industrial Environment. Seminar on Tool Condition Monitoring Seminar on Tool Condition Monitoring 20th August 1993, University College Dublin. University College Dublin, , 20-AUG-93 [Details]
Spur, G., Byrne, G. ; (1991) Ultra Precision Machining - A Theoretical Analysis of the Mechanisms of Surface Formation Second International Conference on Ultra-Precision in Manufacturing Engineering. 27th - 31st May 1991, Braunschweig, Germany.(Short Report). Braunschweig, Germany, , 27-MAY-91 - 31-MAY-91 [Details]
Byrne, G. ; (1991) Machining of Advanced Engineering Ceramics International Conference on Factory Automation and Information Management, 13th - 15th March 1991, Limerick, Ireland. Limerick, Ireland, , 13-MAR-91 - 15-MAR-91 [Details]
Byrne, G. ; (1990) Bearbeitbarkeit von Faserverbundkunststoffen Kolloquium, Institut for Werkzeugmaschinen und Fertigungstechnik, Technische Universität Berlin, 5th December 1990. Berlin, , 05-DEC-90 [Details]
Byrne, G. ; (1990) International Contract Research and Development in Advanced Manufacturing Technology Seminar German-Irish Collaboration in Science and Technology, Dublin, Ireland, 25th October 1990. Dublin, , 25-OCT-90 [Details]
Byrne, G. ; (1990) Lasers in Manufacturing Engineering 7th Conference of the Irish Manufacturing Committee (IMC), 29th - 31st August 1990, Trinity College Dublin, Ireland. Trinity College Dublin, Ireland. , , 29-AUG-90 - 31-AUG-90 [Details]
Byrne, G. ; (1990) Flexible Automated Manufacturing Technological Evaluation of the State of the Art of Flexible Manufacturing Systems for Small to Medium Enterprises Paper to the European Course in Mechatronics, University College Dublin, 3rd to 6th July 1990, Dublin, Ireland University College Dublin, , 03-JUL-90 - 06-JUL-90 [Details]
Spur, G., Byrne. G., Tio, T. H. ; (1990) Bearbeitung von Hybridbauteilen Seminar: Deutsches Industrie Forum für Technologie. Hochfeste Keramiken Konstruktion und Entwicklung, 21st and 22nd May 1990, Ratingen, Düsseldorf. Ratingen, , 21-MAY-90 - 22-MAY-90 [Details]
Byrne, G., Ullmann, F. ; (1990) Spanende Bearbeitung von faserverstärkten Kunststoffen Seminar des FVK-TT, PTZ- Berlin, 27th April 1990. Berlin, , 27-APR-90 [Details]
Spur, G., Byrne, G., Bienia, B. ; (1990) The Performance of PVD-coated High Speed Steel Indexible Inserts in the Milling of Ductile Materials ICTF/ICMC 90, San Diego 1st to 6th April 1990. San Diego, , 01-APR-90 - 06-APR-90 [Details]
Spur, G., Byrne, G., Tio, T.H. ; (1990) Schleifen von Metall/Keramik Hybridbauteilen VDI-Seminar, 27th to 28th March 1990, Berlin. Berlin, , 27-MAR-90 - 28-MAR-90 [Details]
Darwish, A., Spur, G., Byrne, G. ; (1989) Back Built-Up Edge Phenomenon in the Case of Cutting with Cemented Carbides 1st Al.Azhar Engineering Conference, 9th December 1989, Al-Azhar University, Nasr-City, Cairo. Nasr-City, Cairo, , 09-DEC-89 [Details]
Byrne, G., Tio, T.H. ; (1989) Schleifbearbeitung von Keramik/Metall- Hybrid Bauteilen VDI-Seminar 34-13-01, Keramische Bauteile, 12th and 13th October 1989,Produktionstechnisches Zentrum Berlin. Proceedings 9435 Berlin, , 12-OCT-89 - 13-OCT-89 , pp.1-22 [Details]
Byrne, G. ; (1988) Developments and Current Trends in Machine Tools Proceedings of the European Conference on Flexible Manufacturing, 1st and 2nd June 1988, Dublin, Ireland Dublin, , 01-JUN-88 - 02-JUN-88 [Details]
Spur, G., Byrne, G. ; (1987) Advanced Manufacturing Research and Development at the Production Technology Centre Berlin Paper to IMC-IV Conference in NIHE, Limerick, Ireland. 10th and 11th September 1987, Proceedings Limerick, , 10-SEP-87 - 11-SEP-87 , pp.628-638 [Details]
             

Reports

Byrne, G. ; (1999) Continuing Professional Development Policy and Outline Implementation Framework. Reports [Details]
Sexton, L., Byrne, G. ; (1999) Lasers - A New Manufacturing Tool. Reports [Details]
Byrne, G., Sexton, L. ; (1999) Proceedings of European Workshop on Precision Engineering, Micro Engineering and Nanotechnology. Jointly run by the European Society for Precision Engineering and Nantechnology and the National Institute for Technology Management. Reports [Details]
Byrne, G.; (1999) Enginering Professionals for the New Millenium. Reports [Details]
Byrne, G., Young, P., Kelly, K., Brophy, B.; (1998) Compensation for Stocastic Deviations in Monitoring Systems. Reports [Details]
Byrne, G., Barry, J. ; (1998) Machining of Hardened Materials. . Reports [Details]
Byrne, G., Beggan, C. ; (1998) Acoustic Emission in Machining. . Reports [Details]
Byrne, G., Gallagher, D.; (1997) Functional Test System. Reports [Details]
Byrne, G., Mullany, B., Young, P.; (1997) Planarity of Silicon Wafers. Reports [Details]
Byrne, G., Kelly, K., Barry, J., Young, P.; (1996) Report on Machining Process Modelling Literature. Reports [Details]
Byrne, G., Kelly, K., Barry, J. ; (1995) New Machining Processes for the Automotive Industry (NEMPRO). Reports [Details]
Byrne, G. ; (1995) Positional Accuracy of a CNC Machining Centre . Reports [Details]
Byrne, G. ; (1994) The Cultural Gap between Industry and Higher Education Research is a Barrier to Economic Development in Ireland . Reports [Details]
Byrne, G., Dornfeld, D. ; (1994) Report of Workshop on Tool Condition Monitoring Paris. Reports [Details]
Byrne, G., Dornfeld, D. ; (1993) Report of Workshop on Tool Condition Monitoring Paris. Reports [Details]
Spur, G., Byrne, G., Sabotka, I.; (1990) Ceramics Industry - Overview of Engineering and Advanced Ceramics in Germany . Reports [Details]
Byrne, G., Wunsch, U. ; (1985) Composite Materials in Manufacturing Engineering . Reports [Details]
Byrne, G. ; (1985) Tomorrows Technology Today. Production Engineering Aspects of the 1985 ASME Conference, Miami Beach, Florida. . Reports [Details]
Byrne, G.; (1984) Advanced Technology in Manufacturing Engineering. Reports [Details]
Byrne, G., Cuddy, J. ; (0) Contract Research and Development in Advanced Manufacturing Technology - A Review of the European Infrastructure an Analysis of the Opportunities for future German/Irish Collaboration . Reports [Details]
                     

Seminar

O' Donnell, G.E.,Kelly, K., Byrne, G.; (2001) Compensation for Stochastic Deviations in Process Monitoring for Flexible Production Systems COMPRO. Seminar [Details]
O' Donnell, G.E., Byrne, G.; (2000) Compensation for Stochastic Deviations in Process Monitoring for Flexible Production Systems COMPRO. Seminar [Details]

Presentation

Gildea, D. and Byrne, G. and Ahearne, E.; (2008) A Design Methodology for the Systematic Identification of Optimum Joining Technologies in Automotive Body-in-White Design. Solvenia: Presentation [Details]
                                       

Articles

Ives, J. and Byrne, G. and Robinson, E.; (2007) Turbines Turn Tide for Irish Renewable Energy. Ireland: Articles [Details]
                             

Research

Research Interests

Manufacturing Science, Surface Engineering, Machining Technology, Laser Technology, Fine Finishing Processes, Precision Engineering, Engineering Eduation

Research Projects

Sponsor : Enterprise Ireland (EI)
Title : Uniformity Control System for Chemical Mechanica Planarisation (UCSCMP)
Start Date / End Date : 01-SEP-06 / 31-AUG-09
Sponsor : Irish Research Council for Science Engineering and Technology (IRCSET)
Title : Performance of an open-centre turbine
Start Date / End Date : 01-OCT-06 / 30-SEP-09
Sponsor : Enterprise Ireland (EI)
Title : Evaluation of a New Manufacturing Method for Innovative and Efficient Infrared Heating Systems
Start Date / End Date : 01-JUN-09 / 31-JUL-09
Sponsor : Enterprise Ireland (EI)
Title : Real Time Failure Prediction for Manufacturing System Equipment
Start Date / End Date : 04-MAY-09 / 29-OCT-10
Sponsor : Enterprise Ireland (EI)
Title : Improved Manufacturing Efficiency Through Advanced Product Performance Prediction (Virtual Metrology)
Start Date / End Date : 04-MAY-09 / 29-OCT-10
Sponsor : Enterprise Ireland (EI)
Title : Design and Manufacture of a Flexible, Infrared Heating System
Start Date / End Date : 12-JAN-09 / 11-FEB-09
Sponsor : Enterprise Ireland (EI)
Stryker Ireland Ltd
Title : Development of a next generation ultrasonic and vibration assisted surgical tool for bone cutting
Start Date / End Date : 01-OCT-08 / 31-MAY-11
Sponsor : Science Foundation Ireland (SFI)
Title : 3rd CIRP International Conference on High Performance Cutting
Start Date / End Date : 31-MAR-08 / 31-AUG-08
Sponsor : Enterprise Ireland (EI)
Title : The development of next generation ultrasonic and vibration assisted surgical tools for bone cutting (VIBONE)
Start Date / End Date : 01-JAN-08 / 31-DEC-10
Sponsor : Enterprise Ireland (EI)
Element Six Ltd.
Title : Investigation of PCBN tool loading in interrupted hard turning
Start Date / End Date : 01-JAN-07 / 31-DEC-08
Sponsor : Enterprise Ireland (EI)
Title : Laser Hardening of Functional Surfaces of Cast Iron Impeller
Start Date / End Date : 06-SEP-04 / 31-DEC-06
Sponsor : Enterprise Ireland (EI)
Title : Evaluation and production of PLA Biodegradable and fully compostable polymer from a renewable feed stock
Start Date / End Date : 01-JUL-06 / 30-JUN-08