Navigation

Publications

UCD School of Mechanical and Materials Engineering

'Sparks will fly!' Image by Dr Denis Dowling.

'Sparks will fly!' Image by Dr Denis Dowling.

UCD School of Mechanical and Materials Engineering - Research Publications 2010/11

Below is the list of research publications for the UCD School of Mechanical and Materials Engineering in the academic year 2010/11




pdf Click here to download as a PDF (1 kbs)


Peer Reviewed Journals

Dr Eammon Aherne

Timoney, P., Ahearne, E., Byrne G. (2010) "Development & Validation of a 200mm Wafer Scale Finite Element Model of Contact Pressure Distribution in Chemical Mechanical Polishing”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

 
Dr David Browne
Mirihanage, W.U., Browne, D.J. (2011) 'As-cast grain size distribution prediction for grain refined castings via simulating free equiaxed dendrite transport during solidification'. International Foundry Research, 63 (1):28-33.  

Mirihanage, W.U., Browne, D.J. (2010) 'Sedimentation speed of a free dendrite growing in an undercooled melt'. ComputationalMaterials Science, 50 :260-267.

Professor Gerard Byrne

Timoney, P., Ahearne, E., Byrne G. (2010) "Development & Validation of a 200mm Wafer Scale Finite Element Model of Contact Pressure Distribution in Chemical Mechanical Polishing”, Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture.

 
Dr Michel Destrade
M. Destrade, A. Goriely, G. Saccomandi (2011) 'Scalar evolution equations for shear waves in incompressible solids: A simple derivation of the Z, ZK, KZK, and KP equations'. Proceedings of the Royal Society of London - A, 467 :1823-1834.  
M. Shams, M. Destrade, R.W. Ogden (2011) 'Initial stresses in elastic solids: Constitutive laws and acoustoelasticity'. Wave Motion, 48 :552-567.  
M. Destrade, J. Merodio (2011) 'Compression instabilities of tissues with localized strain softening'. Journal of Applied Mechanics, 3 :69-83.  
M. Destrade, G. Saccomandi (2011) 'Transverse waves in nonlinearly elastic solids and the Milne-Pinney equation'. MATHEMATICS AND MECHANICS OF SOLIDS, 16 :586-593.  
R. De Pascalis, M. Destrade, A. Goriely (2011) 'Nonlinear correction to the Euler buckling formula for compressed cylinders with guided-guided end conditions'. JOURNAL OF ELASTICITY, 102 :191-200.  
Twomey, B., Breen, A., Byrne, G., Hynes, A and Dowling, D. P. (2011) 'Rapid discharge sintering of nickel-diamond metal matrix composites'. Journal of Materials Processing Technology, 211 (7):1210-1216.  
Law, V. J., O'Neiill, F. T. and Dowling, D. P. (2011) 'Evaluation of the sensitivity of electro-acousic measurements for process monitoring and control of an atmospheric pressure plasma jet system'. Plasma Sources Science & Technology, 20 .  
Herbert, P. A. F., O'Neill, L., Jaroszynska-Wolinska, J., Stallard, C., Ramamoorthy, A. and Dowling, D. P (2011) 'A comparison between gas and atomised liquid precursor states in the deposition of functional coatings by pin corona plasma'. Plasma Process and Polymers, 8 (3):230-238.  
Law, V. J., Ramamoorthy, A, and Dowling, D. P. (2011) 'Real-time process monitoring during the plasma treatment of carbon weave composite materials'. Journal of Materials Science and Engineering .  
Tynan, J., Dowling, D.P., byrne, G. and Hughes, D. (2011) 'Enhancing polymer adhesion through surface activation using an in-line atmospheric pressure plasma'. International Journal of Nanomanufacturing, 1 :554-569.  
Twomey, B., Nindrayog, A., Niemi, K., Graham, W. G. and Dowling, D. P. (2011) 'Correlation between the electrical and optical properties of an atmospheric pressure plasma during siloxane coating deposition'. plasma chemistry and plasma processing, 31 (1):139-156.  
Dowling D. P., Miller, I. S., Ardhaoui, M. and Gallagher, W. M. (2011) 'Effect of Surface Wettability and Topography on the Adhesion of Osteosarcoma Cells on Plasma-Modified Polystyrene'. Journal of Biomaterials, 26 (3):327-347.  
Ardhaoui, M., Naciri, M., Mullen, T., Brugha, C., Keenan, A., Al-Rubeai, M. and Dowling, D. P. (2010) 'Evaluation of cell behaviour on atmospheric plasma deposited siloxane and fluorosiloxane coatings'. Journal of Adhesion Science and Technology, 24 (5):889-903.  
Twomey, B., Breen, A., Byrne, G. D., Hynes, A. and Dowling, D. P. (2010) 'Comparison of thermal and microwave-assisted plasma sintering of nickel-diamond composites'. Powder Metallurgy, 53 (3):188-190.  
Dr Donal Patrick Finn
J.M. Corberan, D.P. Finn, C.M. Montagud, F.T. Murphy, K.C. Edwards (2011) 'A quasi-steady state mathematical model of an integrated ground source heat pump for building space control'. Energy and Buildings, 43 (1):82-92. Available Online  
Professor David Fitzpatrick
Green C, Fitzpatrick C, FitzPatrick D, Stephens M, Quinlan W, Flavin R (2011) 'Definition of coordinate system for three-dimensional data analysis in the foot and ankle'. Foot & ankle international / American Orthopaedic Foot and Ankle Society [and] Swiss Foot and Ankle Society, 32 (2):193-199.  
Geary C, O'Donnell GE, Jones E, FitzPatrick D, Birkinshaw C (2010) 'Automated in-vitro testing of orthopaedic implants: a case study in shoulder joint replacement'. Proceedings of the Institution of Mechanical Engineers. Part H, Journal of engineering in medicine, 224 (11):1297-1309.  
Professor Michael D Gilchrist
O'Connor, W.T., Smyth, A. & Gilchrist, M.D. (2011) 'Animal models of traumatic brain injury: A critical evaluation'. Pharmacology and Therapeutics, 130 (2):106-113.  
Rueda, MAF,Gilchrist, MD (2011) 'Innovations in Undergraduate Engineering Mechanics Education: Use of Team-Based Research-Led Project Methods for Large Student Cohorts'. International Journal of Engineering Education, 27 :821-830.  
O'Flaherty, R., Gilchrist, M.D. & Cowie, T. (2011) 'Ceremonial or deadly serious? New insight into the function of Irish Early Bronze Age halberds'. British Archaeological Reports, S2255 :39-52.  
Colgan NC, Gilchrist MD, Curran KM (2010) 'Applying DTI white matter orientations to finite element head models to examine diffuse TBI under high rotational accelerations'. Progress in biophysics and molecular biology, 103 (2-3):304-309. Available Online  
Rousseau, P., Hoshizaki, T.B., Gilchrist, M.D. & Post, A. (2010) 'Estimating the influence of neckform compliance on brain tissue strain during a helmeted impact'. Stapp Car Crash Journal, 54 (November):37-48.  
Stewart, D., Young. L.R., Goel, R., Christou, G. & Gilchrist, M.D. (2010) 'Evaluating the performance of helmet linings incorporating fluid channels'. Journal of ASTM International, JAI102821 .  
Tabakovic, A., Karac, A., Ivankovic, A., McNally, C., Gibney, A., & Gilchrist, M.D. (2010) 'Modelling the quasistatic behaviour of bituminous material using a combined Cohesive Zone and Finite Volume approach'. Engineering Fracture Mechanics, 77 (13):2403-2418.  
Professor Alojz Ivankovic
Petrovic, M., Carolan, D., Ivankovic, A. and Murphy, N. (2011) 'Role of rate and temperature on fracture and mechanical properties of PCD'. Key Engineering Materials, 452-453 :153-156.  
Carolan, D., Petrovic, M., Ivankovic, A. and Murphy, N. (2011) 'Fracture Properties of PCBN as a function of loading rate and temperature'. Key Engineering Materials, 452-453 :457-600.  
Professor Chen-Ching Liu
Y. Hou, C. C. Liu, K. Sun, P. Zhang, S. Liu, and D. Mizumura (2011) 'Computation of Milestones for Decision Support during System Restoration'. IEEE Trans Power Systems, :1399-1409.  
W. Sun, C. C. Liu, and L. Zhang (2011) 'Optimal Generator Start-Up Strategy for Bulk Power System Restoration'. IEEE Trans Power Systems, :1357-1366.  
J. Li, C. C. Liu, and K. Schneider (2010) 'Controlled Partitioning of a Power Network Considering Real and Reactive Power Balance'. IEEE Trans Power Systems, 1 (3):261-269.  
Dr David McKeown
O'Connor W.J., McKeown, D. J. (2011) 'Time-optimal control of flexible robots made robust through wave-based feedback'. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 133 (1). Available Online  
Dr Neal Murphy
Carolan, D., Petrovic, M., Ivankovic, A. and Murphy, N. (2011) 'Fracture Properties of PCBN as a function of loading rate and temperature'. Key Engineering Materials, 452-453 :457-600.  
Petrovic, M., Carolan, D., Ivankovic, A. and Murphy, N. (2011) 'Role of rate and temperature on fracture and mechanical properties of PCD'. Key Engineering Materials, 452-453 :153-156.  
Dr William O'Connor
O'Connor W.J., McKeown, D. J. (2011) 'Time-optimal control of flexible robots made robust through wave-based feedback'. JOURNAL OF DYNAMIC SYSTEMS MEASUREMENT AND CONTROL-TRANSACTIONS OF THE ASME, 133 (1). Available Online  
Morente, JA,Navarro, EA,Porti, JA,Salinas, A,Morente-Molinera, JA,Toledo-Redondo, S,O'Connor, WJ,Besser, BP,Lichtenegger, HIM,Fornieles, J,Mendez, A (2011) 'A LATE-TIME ANALYSIS PROCEDURE FOR EXTRACTING WEAK RESONANCES. APPLICATION TO THE SCHUMANN RESONANCES OBTAINED WITH THE TLM METHOD'. Progress In Electromagnetics Research-Pier, 117 :1-18.  
O'Connor, WJ (2011) 'Wave-like modelling of cascaded, lumped, flexible systems with an arbitrarily moving boundary'. Journal of Sound and Vibration, 330 :3070-3083.  
Dr Feidhlim O'Neill
Dowling, DP,O'Neill, FT,Langlais, SJ,Law, VJ (2011) 'Influence of dc Pulsed Atmospheric Pressure Plasma Jet Processing Conditions on Polymer Activation'. PLASMA PROCESSES AND POLYMERS, 8 :718-727.  
Dr William Smith
Smith WJ, Morrin S, and Timoney DJ (2011) 'Effect of operating condition on the particulate matter emission factor for a domestic biomass boiler'. Proceedings of the Institution of Mechanical Engineers, 225 (5):614-618.  
Dr Kenneth Thomas Stanton
O'Flynn, Kevin P., Twomey, Barry, Breen, Aidan, Dowling, Denis P. and Stanton, Kenneth T. (2011) 'Microwave-Assisted Rapid Discharge Sintering of a Bioactive Glass-Ceramic'. Journal of Materials Science : Materials in Medicine, 22 (7).  
O'Flynn, KP,Stanton, KT (2011) 'Optimisation of the enamelling of an apatite-mullite glass-ceramic coating on Ti6Al4V'. Journal of Materials Science : Materials in Medicine, 22 :2035-2044.  
Dr David Timoney
Smith WJ, Morrin S, and Timoney DJ (2011) 'Effect of operating condition on the particulate matter emission factor for a domestic biomass boiler'. Proceedings of the Institution of Mechanical Engineers, 225 (5):614-618.  
Ian Whelan, Stephen Samuel, David Timoney , Ahmed Hassaneen (2010) 'Characteristics of Nano-Scale Particulates from Gasoline Turbo-Intercooled Direct-Injection'. SAE International Journal of Fuels and Lubricants, 3 :839-848. Available Online  
Back to Top

Conference Publications

Dr Eammon Aherne

Liu, J., Ahearne, E. and Byrne, G. (2011)“Design of an Advanced Control System for Dynamic Control of the Applied Load in Chemical Mechanical Polishing (CMP): Characterisation of the Load-Displacement Response”, Proceedings of the 28th International Manufacturing Conference, 30th August to 1st September 2011. Keaveney, S., Connolly, P., Ahearne, E. and Byrne, G. (2011) “Curve Interpolation in CNC Machining”, Proceedings of the 28th International Manufacturing Conference, 30th August to 1st September, 2011

Ahearne, E., Keaveney, S., Connolly, P. and Byrne, G. (2011) “High Performance Manufacturing of Medical Devices”, Proceedings of the Machine Tool Technologies Research Foundation 2011 Annual Meeting, 5th to 8th July, 2011

Liu, J., Ahearne, E. and Byrne, G. (2011) “Characterisation of the Transfer Function of an Advanced Control System for Chemical Mechanical Polishing (CMP)”, Proceedings of the 11th International Conference of The European Society for Precision Engineering and Nanotechnology, Como, May 2011.

Byrne, G. and Ahearne, E. (2011) “Manufacturing Engineering-New Challenges from an Energy and Environmental Perspective”, Proceedings of the 14th International Machine Tool Engineers Conference, Tokyo Big Sight, Tokyo, Japan, 29th-30th October, 2010 (Keynote Paper).

Dr David Browne

Zimmermann, G., Sturz, L., Billia, B., Mangelinck-Noël, N., Nguyen Thi, H., Gandin, Ch.-A., Browne, D. J. , Mirihanage, W. U., (2011) Investigation of Columnar-to-Equiaxed Transition in Solidification Processing of AlSi alloys in Microgravity ¿ CETSOL 4th International Symposium on Physical Sciences in Space - ISPS4, Bonn - Bad Godesberg, Germany,  
Mooney, R., McFadden, S., Rebow, M., Browne, D.J. (2011) A front tracking model of the MAXUS-8 microgravity solidification experiment on a Ti-46at.%Al-8at.%Nb alloy Third International Conference on Advances in Solidification Processes, Rolduc Abbey, Kerkrade, The Netherlands,  
Dong, H., Browne, D.J., Cocks, A., Mathiesen, R., Wen, S., Hoglund, L., Kleijn, C., Zhang, L., Pfeifer, T., Zak, A., Dantzig, J. (2011) Modelling of Interface Evolution in Advanced Welding (MintWeld): a project of the European Commission Seventh Framework Programme (FP7) Third International Conference on Advances in Solidification Processes, Rolduc Abbey, Kerkrade, The Netherlands,  
Mirihanage, W.U., Browne, D.J., Sturz, L., Zimmermann, G. (2011) Numerical modelling of the Material Science Lab - Low Gradient Furnace (MSL-LGF) microgravity directional solidification experiments on the columnar to equiaxed transition Third International Conference on Advances in Solidification Processes, Rolduc Abbey, Kerkrade, The Netherlands,  
Duggan, G., Tong, M., Browne, D.J (2011) An integrated meso-scale numerical model of melting and solidification in laser welding Third International Conference on Advances in Solidification Processes, Rolduc Abbey, Kerkrade, The Netherlands,  
Kaiser, R., Morris, V.N., Williamson, K., Browne, D.J. (2011) Investigation of the effects of cooling rate on the microstructure of investment cast biomedical grade Co alloys Third International Conference on Advances in Solidification Processes, Rolduc Abbey, Kerkrade, The Netherlands,  
Mooney, R., Browne, D., Budenkova, O., Fautrelle, Y., Froyen, L., Kartavykh, A., McFadden, S., Rex, S., Schmitz, B., Voss, D. (2011) Review of the Maxus 8 Sounding Rocket Experiment to Investigate Solidification in a Ti-Al-Nb Alloy 20th European Space Agency Symposium on European Rocket and Balloon Programmes and Related Research, Hyeres, Provence, France,  
Mirihanage, W., Browne, D.J. (2011) Effects of gravity on the columnar to equiaxed transition in directional solidification . In: M. Tiryakioglu, J. Campbell, P.N. Crepeau eds. 4th International Shape Casting Symposium, 140th TMS Annual Meeting & Exhibition, San Diego CA, USA, 129 - 136  

Stratton, D.J., Byrne, C., Mulcahy, J., Browne, D.J. (2011) Sub-micron feature patterning of thermoplastics using multi-scale BMG tooling MRS Fall meeting, Boston, MA, USA, mrsf10-1300-u02-

Professor Gerard Byrne

Liu, J., Ahearne, E. and Byrne, G. “Design of an Advanced Control System for Dynamic Control of the Applied Load in Chemical Mechanical Polishing (CMP): Characterisation of the Load-Displacement Response”, Proceedings of the 28th International Manufacturing Conference, 30th August to 1st September, 2011
Keaveney, S., Connolly, P., Ahearne, E. and Byrne, G. “Curve Interpolation in CNC Machining”, Proceedings of the 28th International Manufacturing Conference, 30th August to 1st September, 2011
Ahearne, E., Keaveney, S., Connolly, P. and Byrne, G. “High Performance Manufacturing of Medical Devices”, Proceedings of the Machine Tool Technologies Research Foundation 2011 Annual Meeting, 5th to 8th July, 2011
Liu, J., Ahearne, E. and Byrne, G. “Characterisation of the Transfer Function of an Advanced Control System for Chemical Mechanical Polishing (CMP)”, Proceedings of the 11th International Conference of The European Society for Precision Engineering and Nanotechnology, Como, May 2011.

Liu, J., Ahearne, E. and Byrne, G. (2011)“Design of an Advanced Control System for Dynamic Control of the Applied Load in Chemical Mechanical Polishing (CMP): Characterisation of the Load-Displacement Response”, Proceedings of the 28th International Manufacturing Conference, 30th August to 1st September 2011.

Keaveney, S., Connolly, P., Ahearne, E. and Byrne, G. (2011) “Curve Interpolation in CNC Machining”, Proceedings of the 28th International Manufacturing Conference, 30th August to 1st September, 2011

Ahearne, E., Keaveney, S., Connolly, P. and Byrne, G. (2011) “High Performance Manufacturing of Medical Devices”, Proceedings of the Machine Tool Technologies Research Foundation 2011 Annual Meeting, 5th to 8th July, 2011

Liu, J., Ahearne, E. and Byrne, G. (2011) “Characterisation of the Transfer Function of an Advanced Control System for Chemical Mechanical Polishing (CMP)”, Proceedings of the 11th International Conference of The European Society for Precision Engineering and Nanotechnology, Como, May 2011.

Byrne, G. and Ahearne, E. (2011) “Manufacturing Engineering-New Challenges from an Energy and Environmental Perspective”, Proceedings of the 14th International Machine Tool Engineers Conference, Tokyo Big Sight, Tokyo, Japan, 29th-30th October, 2010 (Keynote Paper).

 
Dr Denis Dowling
Ardhaoui, M., Zheng, M., Pulpytel, J., Dowling, D. P., Jolivait, C. and Khonsari, F. A. (2011) Optimization of laccase bioelectrode efficiency by atmospheric plasma activation ISPC20 International Symposium on Plasma Chemistry,  
Dowling, D. P. and Stallard, C. (2011) Deposition of nano and micron thick aligned fiber plasma polymerised coatings using an atmospheric plasma jet technique International Symposium on Plasma Chemistry (SPC), Philadelphia - July 24-29 2011,  
Donegan, M. and Dowling, D. P. (2011) Protein adhesion on atmospheric plasma deposited quaternary ammonium salt coatings 14th Annual Sir Bernard Crossland Seminar,  
Rahman, M., MacElroy, J.M.D., Thampi, K.R., Dowling, D.P. (2010) The influence of doping (Ti and/or Si) on structure, morphology and photoresponse properties of MOCVD deposited α¿Fe2O3 thin film for efficient water splitting Nano and Surface Science Approaches to Production and Storage of Hydrogen, Noordwijkerhout, The Netherlands,  
Awais, M., Rahman, M., MacElroy, J.M.D., Dini, D., Vos, J. G., Denis P. Dowling, D.P. (2010) Application of a novel microwave plasma treatment for the sintering of Nickel oxide coatings for use in dye-sensitized solar cells 12th International Conference on Plasma Surface Engineering PSE 2010, Garmisch-Partenkirchen, Germany,  
Dang, B.H.Q., Rahman, M., MacElroy, J.M.D., Dowling, D.P. (2010) Conversion of amorphous TiO2 coatings into their crystalline form using a novel microwave plasma treatment 12th International Conference on Plasma Surface Engineering PSE 2010, Garmisch-Partenkirchen, Germany,  
Dr Donal Patrick Finn
Edwards, K.C., Jones, A.T. and Finn, D.P. (2011) Evaluation of a ground source heat pump system with varying loads and return water temperatures using different system performance factors 23rd IIR Int. Cong. on Refrigeration, Prague,  
Edwards, K.C., Finn, D.P., Corberan, J.C. and Montagud, C. (2011) Evaluation of a building integrated ground source heat pump using system performance factors 10th IEA Heat Pump Conference, Tokyo,  
Professor David Fitzpatrick
Cardiff P, Ivankovic A, Flavin R, FitzPatrick, D Karac A. (2011) Numerical Analysis of the Hip Joint Bones in Contact ACME-UK, Heriott-Watt University, Edinburgh,  
Cardiff P, Ivankovic A, Flavin R, FitzPatrick, D., Karac A. (2011) Contact Stress Analysis in OpenFOAM - Aplication to Hip Joint Bones 6th OpenFOAM Workshop, Penn State University,  
Cardiff P, Ivankovic A, Flavin R, FitzPatrick, D Karac A. (2011) The Development of a Numerical Model of the Hip Joint Bioengineering In Ireland, NUI, Galway,  
Cardiff P, Ivankovic A, Flavin R, FitzPatrick, D Karac A. (2011) Development of a Finite Volume Methodology for Linear Elastic Contact Problems 21st International Workshop on Computational Mechanics of Materials, IWCMM, Limerick, Ireland,  
Professor Michael D Gilchrist
Gilchrist, M.D. (2011) A weapon of choice: Replication of damage in Irish Early Bronze Age halberds Warfare in Antiquity: Approaches and Controversies, Dublin, - .  
Rashid, B., Destrade, M. & Gilchrist, M.D. (2011) Modelling and simulation of brain tissue in tension and compression at high strain rates Workshop on Computational Mechanics of Materials, Limerick, - .  
Motherway, J. & Gilchrist, M.D. (2011) Modelling the impact response of cranial bone Workshop on Computational Mechanics of Materials, Limerick, - .  
Ni Annaidh, A., Bruyere, K., Destrade, M., Gilchrist, M.D., Maurini, C., Ottenio, M. & Saccomandi, G. (2011) Modelling the anisotropic behaviour of skin Workshop on Computational Mechanics of Materials, Limerick, - .  
Post, A., Oeur, A., Hoshizaki, B. & Gilchrist, M.D. (2011) The influence of kinematic variables on brain deformation metrics from hockey helmet impacts Proc. International Society for Biomechanics conference, Brussels, - .  
Mao, H., Zhu, F., Clausen, F., Colgan, N., Gilchrist, M.D. & Yang, K.H. (2011) Biomechanical analysis of fluid percussion model of brain injury Neurotrauma 2011 USA Symposium, Florida, A123 - A124.  
Baumgartner, D., Gilchrist, M.D., Lamy, M., Willinger, R. & Davidsson, J. (2011) Traumatic brain injuries investigation using finite element model of rat brain IUTAM Symposium on Impact Biomechanics in Sport, Dublin, - .  
Motherway, J. & Gilchrist, M.D. (2011) Modelling the impact response of cranial bone IUTAM Symposium on Impact Biomechanics in Sport, Dublin, - .  
Rashid, B., Destrade, M. & Gilchrist, M.D. (2011) Mechanical properties of brain tissue in tension at high strain rates IUTAM Symposium on Impact Biomechanics in Sport, Dublin, - .  
Hoshizaki, B., Walsh, E., Post, A., Rousseau, P., Kendall, M., Karton, C., Oeur, A., Foreman, S. & Gilchrist, M.D. (2011) The application of brain tissue deformation values in assessing the safety performance of ice hockey helmets IUTAM Symposium on Impact Biomechanics in Sport, Dublin, - .  
Oeur, A., Post, A., Hoshizaki, B. & Gilchrist, M.D. (2011) The correlation between brain deformation metrics and acceleration using a linear and non-linear impact protocol Proc. International Society for Biomechanics conference, Brussels, - .  
Karton, C., Hoshizaki, T.B. & Gilchrist, M.D. (2011) Finite element analysis using a 3-dimensional impact protocol for brain injury prediction Proc. International Society for Biomechanics conference, Brussels, - .  
Post, A., Walsh, E., Hoshizaki, B. & Gilchrist, M.D. (2011) Analysis of loading curve characteristics on the production of brain deformation metrics IUTAM Symposium on Impact Biomechanics in Sport, Dublin, - .  
Post, A., Hoshizaki, B. & Gilchrist, M.D. (2011) Human brain tolerance thresholds for traumatic brain injury from reconstructions IUTAM Symposium on Impact Biomechanics in Sport, Dublin, - .  
Forero Rueda, M.A. & Gilchrist, M.D. (2011) Computational protective helmet component analysis IUTAM Symposium on Impact Biomechanics in Sport, Dublin, - .  
Ni Annaidh, A., Bruyere, K., Destrade, M., Gilchrist, M.D., Maurini, C., Ottenio, M. & Saccomandi, G. (2011) Modelling the anisotropic behaviour of skin IUTAM Symposium on Impact Biomechanics in Sport, Dublin, - .  
Zhang, N., Chu, J.S. & Gilchrist, M.D., (2011) Micro injection molding: Characterization of cavity filling process SPE Annual Technical Conference, Boston, 2085 - 2091  
Sharkey, E.J., Cassidy, M., NicDaeid, N. & Gilchrist, M.D. (2010) Investigation of forces associated with laceration of skin Forensic Science Society, UK, - .  
Ni Annaidh, A., Ottenio, M., Bruyere, K., Destrade, M. & Gilchrist, M.D. (2010) Mechanical properties of excised human skin International Conference on Crashworthiness, Washington, - .  
Motherway, J.A., Verschueren, P., Van der Perre, G., Vander Sloten, J. & Gilchrist, M.D. (2010) Modelling the impact response of cranial bone International Conference on Crashworthiness, Washington, - .  
Motherway, J.A., Verschueren, P., Van der Perre, G., Vander Sloten, J. & Gilchrist, M.D. (2010) The mechanical properties of cranial bone IRCOBI Conference, International Research Council on the Biomechanics of Impact, Hannover, - .  
Rashid, B., Gilchrist, M.D. & Destrade, M. (2010) Influence of test conditions on dynamic viscoelastic and hyperelastic properties of brain tissue International Conference on Crashworthiness, Washington, - .  
Forero Rueda, M. & Gilchrist, M.D. (2010) Equestrian helmet design: A computational and head impact biomechanics simulation approach International Conference on Crashworthiness, Washington, - .  
Motherway, J.A. & Gilchrist, M.D. (2010) Head impact biomechanics simulations: A forensic tool for reconstructing head trauma? International Conference on Crashworthiness, Washington, - .  
Mr Vincent Joseph Hargaden
Hargaden, V. & Ryan, J. (2011) Workforce Analytics: Matching Supply and Demand in Professional Service Firms Manufacturing and Service Operations Management (MSOM) Annual Conference, Ann Arbor, Michigan, USA,  
Hargaden, V. & Ryan, J. (2011) Workforce Capacity Management in Service Operations Production and Operations Management Society (POMS) Annual Conference, Reno, Nevada, USA,  
Professor Alojz Ivankovic
Cardiff P, Ivankovic A, Flavin R, FitzPatrick, D Karac A. (2011) Development of a Finite Volume Methodology for Linear Elastic Contact Problems 21st International Workshop on Computational Mechanics of Materials, IWCMM, Limerick, Ireland,  
Cardiff P, Ivankovic A, Flavin R, FitzPatrick, D., Karac A. (2011) Contact Stress Analysis in OpenFOAM - Aplication to Hip Joint Bones 6th OpenFOAM Workshop, Penn State University,  
J. Mohan, A. Karac, N. Murphy and A. Ivankovic. (2011) An experimental and numerical investigation of the mixed-mode fracture toughness and lap shear strength of aerospace grade composite joints 21st International Workshop on Computational Mechanics of Materials, IWCMM, University of Limerick,  
M. Leonard, A. Ivankovic, N. Murphy, A. Karac (2011) Micro-Mechanical Modeling of Nano-Toughened Adhesives 6th OpenFOAM Workshop, PennState University, USA,  
M. Leonard, A. Ivankovic, N. Murphy, A. Karac, (2011) Numerical examinations of void growth models of spherical void growth in a continuum 21st International Workshop on Computational Mechanics of Materials, IWCMM, University of Limerick,  
Cardiff P, Ivankovic A, Flavin R, FitzPatrick, D Karac A. (2011) The Development of a Numerical Model of the Hip Joint Bioengineering In Ireland, NUI, Galway,  
Cardiff P, Ivankovic A, Flavin R, FitzPatrick, D Karac A. (2011) Numerical Analysis of the Hip Joint Bones in Contact ACME-UK, Heriott-Watt University, Edinburgh,  
Kanyanta, V., Ivankovic, A. and O'Cuilleanain, N., (2011) Effect of Oscillatory Flow on Cell to Substrate Adhesion of Human Cells: Understanding Atherogenesis 16th International Conference on Finite Elements in Flow Problems (FEF 2011), Direct and Inverse Methods for Cardiovascular and Pulmonary Biomechanics Minisymposium, Munich,  
J. Mohan, A. Karac, N. Murphy and A. Ivankovic (2011) An experimental and numerical investigation of the mixed-mode fracture toughness and lap shear strength of aerospace grade composite joints 34th Annual Meeting of the Adhesion Society, Savannah, Georgia, USA,  
A. Ivankovic, A. Karac, B. R. K. Blackman, V. Cooper, A. J. Kinloch, S. Rodriguez Sanchez and W. S. Teo (2011) Modelling the Fracture Behaviour of Adhesively-Bonded Joints as a Function of Test Rate - A Rate Dependent Czm Is Required to Predict the Full Range of Behaviour 34th Annual Meeting of The Adhesion Society, Inc, Savannah, GA, USA, 2011,  
D. McAuliffe, A. Karac, N. Murphy, A. Ivankovic (2011) Transferability of Adhesive Fracture Toughness Measurements between Peel and TDCB Test Methods for a Nano-Toughened Epoxy 34th Annual Meeting of The Adhesion Society, Inc, Savannah, GA, USA, 2011,  
Marcelo Matos Martins, Jose Divo Bressan, Sergio Tonini Button, Alojz Ivankovic (2010) Extrusion Process by Finite Volume Method Using OpenFoam Software 'Advances in Materials and Processing Technologies', Paris, France,  
Petrovic, M., Carolan, D., Ivankovic, A. and Murphy, N. (2010) Role of Rate and Temperature on Fracture and Mechanical Properties of PCD The 9th International Conference on Fracture and Damage Mechanics,  
Carolan, D., Petrovic, M., Ivankovic, A. and Murphy, N. (2010) Fracture Properties of PCBN as a Function of Loading Rate and Temperature The 9th International Conference on Fracture and Damage Mechanics,  
Dr Valentine Kanyanta
V. Kanyanta, A. Ivankovic, N. Ocuilleanain (2011) Effect of Oscillatory Flow on Cell to Substrate Adhesion of Human Cells: Understanding Atherogenesis 16th International Conference on Finite Elements in Flow Problems (FEF2011), Munich, Germany,  
Professor Chen-Ching Liu
S. S. Wu, C. C. Liu, A. Shosha, and P. Gladyshev (2011) Cyber Security and Information Protection in a Smart Grid Environment IFAC Congress, Invited Session on Emerging EMS Features and Functions Needed for the Future Control Center in the Smart Grid Environment, Milan, Italy,  
W. Sun, C. C. Liu, and S. Liu (2011) Black Start Capability Assessment in Power System Restoration IEEE PES General Meeting,  
J. Hong, S. S. Wu, A. Stefanov, A. Shosha, C. C. Liu, P. Gladyshev, and M. Govindarasu (2011) An Intrusion and Defense Testbed in a Cyber-Power System Environment IEEE PES General Meeting,  
J. Yan, C. C. Liu, and M. Govindarasu (2011) Cyber Intrusion of Wind Farm SCADA System and Its Impact Analysis IEEE PES Power Systems Conference and Exposition, Phoenix, USA,  
K. Bell, D. Cirio, A. M. Denis, L. He, C. C. Liu, G. Migliavacca, C. Moreira, and P. Panciatici (2010) Economic and Technical Criteria for Designing Future Off-Shore HVDC Grids Innovative Smart Grid Technologies Europe Conference, Gothenburg, Sweden,  
Dr Neal Murphy
J. Mohan, A. Kara?, N. Murphy & A. Ivankovi?. (2011) An Experimental and Numerical Investigation of the Mixed-Mode Fracture Toughness and Lap Shear Strength of Aerospace Grade Composite Joints 21st International Workshop on Computational Mechanics of Materials (IWCMM), Limerick, Ireland,  
M. Leonard, A. Ivankovic, N.Murphy, A. Kara?. (2011) Numerical Examination of Void Growth Models of Spherical Void Growth in a Continuum 21st International Workshop on Computational Mechanics of Materials (IWCMM), Limerick, Ireland,  
M. Leonard, A. Ivankovic, N.Murphy, A. Kara?. (2011) Micro-Mechanical Modeling of Nano-Toughened Adhesives 6th OpenFOAM Workshop, Penn State University, USA,  
S. Stelzer, A.J. Brunner, A. Argüelles, N. Murphy, G. Pinter. (2011) Mode I delamination fatigue crack growth in unidirectional fibre reinforced composites: Development of a standardized test procedure 11th Deformation and Fracture of Composites (DFC-11), Cambridge, UK,  
J. Mohan, A. Kara?, N. Murphy & A. Ivankovi?. (2011) An Experimental and Numerical Investigation of the Mixed Mode Fracture Toughness and Lap Shear Strength of Aerospace Grade Composite Joints 34th Annual Meeting of the Adhesion Society, Savannah, Georgia, USA,  
D. McAuliffe, A. Kara?, N. Murphy, A. Ivankovi?. (2011) Transferability of Adhesive Fracture Toughness Measurements between Peel and TDCB Test Methods for a Nano-Toughened Epoxy 34th Annual Meeting of the Adhesion Society, Savannah, Georgia, USA,  
Carolan, D., Petrovic, M., Ivankovic, A. and Murphy, N. (2010) Fracture Properties of PCBN as a Function of Loading Rate and Temperature The 9th International Conference on Fracture and Damage Mechanics,  
Petrovic, M., Carolan, D., Ivankovic, A. and Murphy, N. (2010) Role of Rate and Temperature on Fracture and Mechanical Properties of PCD The 9th International Conference on Fracture and Damage Mechanics,  
Dr William O'Connor
O'Connor, W. J. (2011) Low order models of wave structure interaction, Workshop on Wave Energy, NUI Maynooth, July 2011 Workshop on Wave Energy, NUI Maynooth,  
William J. O'Connor, Hossein Habibi (2011) Residual vibrations in wave-based control of lumped, flexible systems Multibody Dynamics 2011, ECCOMAS Thematic Conference, Brussels,  
Hossein Habibi, Kourosh H. Shirazi, William O'Connor (2011) Optimization of the bump steering response of a McPherson suspension using a genetic algorithm Multibody Dynamics 2011, ECCOMAS Thematic Conference, Brussels,  
Hossein Habibi, William J. O'Connor (2011) Wave-based control of under-actuated two-dimensional mass-spring arrays Multibody Dynamics 2011, ECCOMAS Thematic Conference, Brussels,  
O'Connor, W.J. (2011) Control of under-actuated lumped flexible systems subject to external viscous damping forces Multibody Dynamics 2011, ECCOMAS Thematic Conference, Brussels,  
Dr William Smith
McGovern, R. and Smith, W. (2011) Optimal Concentration and Temperatures of Solar Thermal Power Plants ECOS 2011,  
Dr Kenneth Thomas Stanton
Kevin Roche, Ronan Lonergan, and Kenneth Stanton (2010) Agglomeration of Nanoparticles in Heat Transfer Nanofluids Materials Ireland 2010, Dublin, Ireland,  
Dr David Timoney
Ian Whelan, Stephen Samuel*, David Timoney , Ahmed Hassaneen* (*Oxford Brookes Univ) (2010) Characteristics of Nano-Scale Particulates from Gasoline Turbo-Intercooled Direct-Injection Engine SAE 2010 Powertrains Fuels & Lubricants Meeting ( SAE Paper No. 2010-01-2197), Available Online  
Back to Top

Other Publications
Dr Denis Dowling
Law, V. J., Nwankire, C. E., Dowling, D. P. and Daniels, S. (2011) Acoustic Emission within an Atomospheric Helium Corona Discharge Jet. Chaos Theory: Modeling, Simulation and Applications: Presented Papers.  
Back to Top