Navigation

Publications

'Stresses and strains within your hip'. Image by Dr Philip Cardiff.

'Stresses and strains within your hip'. Image by Dr Philip Cardiff.

UCD School of Mechanical and Materials Engineering

UCD School of Mechanical and Materials Engineering - Research Publications 2013/14

Below is the list of research publications for the UCD School of Mechanical and Materials Engineering in the academic year 2013/14




pdf Click here to download as a PDF (292 kbs)


Book Chapters

Professor Denis Dowling
V. J. Law, F. T. O'Neill and D. P. Dowling (2014) 'Automatic computation of crossing point numbers within orthogonal interpolation line-graphs' In: I. Zelinka (eds). How Nature Works, Complexity in Interdisciplinary Research and Applications. Switzerland: Elsevier. , pp.195-216  
D. P. Dowling (2014) 'Surface processing using cold atmospheric pressure plasmas' In: D. Cameron (eds). Thin Film Material Processing, Comprehensive Materials Processing. Unknown: Elsevier. , pp.171-185  
V. Law and D. P. Dowling (2013) 'ISCS'13' In: V. Law and D. P. Dowling (eds). Active control metrology for preventing induced thermal damage during atmospheric pressure plasma processing of thermal sensitive materials. Algeria: Springer.  
Professor Alojz Ivankovic
Kanyanta, V. Ivankovic, A., Murphy, N. (2013) 'Biomedical Applications of Elastomers, their Blends, IPNs and Composites' In: Thomas, S., Mathew, A.P., Visakh, P.M., Chandra, A.K (eds). Advances in Elastomers II. Berlin, Germany: Springer-Verlag GmbH.  
Dr Neal Murphy
Kanyanta, V. Ivankovic, A., Murphy, N. (2013) 'Biomedical Applications of Elastomers, their Blends, IPNs and Composites' In: Thomas, S., Mathew, A.P., Visakh, P.M., Chandra, A.K (eds). Advances in Elastomers II. Berlin, Germany: Springer-Verlag GmbH.  


Back to Top

Peer Reviewed Journals

Dr Eamonn Ambrose
Marshall, Donna; Ambrose, Eamonn; McIvor, Ronan; Lamming, Richard (2014) 'Self-interest or the greater good: How political and rational dynamics influence the outsourcing process'. International Journal of Operations & Production Management . Available Online  
Dr David Browne
Nguyen-Thi, H., Reinhart, G., Salloum-Abou-Jaoude, G., Browne, D.J., Murphy, A.G., Houltz, Y., Li, J., Voss, D., Verga, A., Mathiesen, R.H., Zimmermann, G. (2014) 'XRMON-GF experiments devoted to the in situ X-ray radiographic observation of growth process in microgravity conditions'. Microgravity Science and Technology, 26 :37-50.  
de Faoite, D., Browne, D.J., Del Valle Gamboa, J.I., Stanton, K.T. (2014) 'Inverse estimate of heat flux on a plasma discharge tube to steady-state conditions using thermocouple data and a radiation boundary condition'. International Journal of Heat and Mass Transfer, 77 :564-576.  
Murphy, A.G., Li, J., Janson, O., Verga, A., Browne, D.J. (2014) 'Microgravity and hypergravity observations of equiaxed solidification of Al-Cu alloys using in-situ X-radiography recorded in real-time on board a parabolic flight'. Materials Science Forum, 790-791 :52-58.  
Zimmermann, G., Sturz, L., Billia, B., Mangelinck-Noël, N., Liu, R.D., Nguyen Thi, H., Bergeon, N., Gandin Ch.-A., Browne, D.J., Beckermann, Ch. Tourret, D., Karma, A. (2014) 'Columnar-to-Equiaxed Transition in Solidification Processing of AlSi7 alloys in Microgravity - The CETSOL project'. Materials Science Forum, 790-791 :12-21.  
Tong, M., Browne, D.J. (2014) 'An incompressible multi-phase smoothed particle hydrodynamics (SPH) method for modelling thermocapillary flow'. International Journal of Heat and Mass Transfer, 73 :284-292.  
Kaiser, R., Williamson, K., O'Brien, C., Browne, D.J. (2013) 'Effects of section size, surface cooling conditions and crucible material on microstructure and as-cast properties of investment cast Co-Cr biomedical alloy'. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 44 (12):5333-5342.  
Xie, Y., Dong, H., Liu, J., Duggan, G., Davidchack, R.L., Dantzig, J.A., Tong, M., Browne, D.J. (2013) 'A multi-scale approach to simulate solidification structure evolution and solute segregation in a weld pool'. Journal of Algorithms & Computational Technology .  
Dr Declan Carolan
Patricia Alveen, Declan McNamara, Declan Carolan, Neal Murphy, Alojz Ivankovi? (2013) 'Micromechanical Modelling of Advanced Ceramics Using Statistically Representative Microstructures'. Key Engineering Materials, 577-578 :53-56.  
Professor Denis Dowling
S. Sheehan, K. R. Thampi, D. P. Dowling (2014) 'Influence of microwave plasma pre-treatments of TiO2 electrodes on dye-sensitized solar cell efficiencies'. Journal of Electroanalytical Chemistry, 725 :12-18.  
J. Mohan, A. Ramamoorthy, A. Ivankovic, D. Dowling, N. Murphy (2014) 'Effect of an atmospheric pressure plasma treatment on the mode I fracture toughness of a co-cured composite joint'. The Journal of Adhesion, 90 (9):733-754.  
M. Naciri, D. P. Dowling and M. Al-Rubeai (2014) 'Differential sensitivity of mammalian cell lines to non-thermal atmospheric plasma'. PLASMA PROCESSES AND POLYMERS, 11 (4):391-400.  
C . Contini, R. Álvarez, M. O'Sullivan, D. P. Dowling, S. Gargan and F. J. Monahan (2014) 'Effect of an active packaging with Citrus extract on lipid oxidation and sensory quality of cooked turkey meat'. Meat Science, 96 (3):1171-1176.  
M. Awais, E. Gibson, J. G. Vos, D. P. Dowling, A. Hagfeldt, D. Dini (2014) 'Fabrication of efficient NiO photocathodes prepared via RDS with novel routes of substrate processing for p-type dye-sensitized solar cells'. ChemElectroChem, 1 (2):384-391.  
V. Milosavljevic, M. Donegan, P. J. Cullen and D. P. Dowling (2014) 'Diagnostics of an O2¿He rf atmospheric plasma discharge by spectral emission'. Journal of the Japanese Physical Society, 83 (1):014501-014508.  
M. Lubwama, B. Corcoran, K. V. Rajani, C. S. Wong, J. B. Kirabira, A. Sebbit, K. A. McDonnell, D. P. Dowling, K. Sayerse (2014) 'Flexibility and frictional behaviour of DLC and Si-DLC films deposited on nitrile rubber'. Surface and Coatings Technology, 239 :84-94.  
V. Novelli, S. Sheehan, D. P. Dowling and D. Dini (2014) 'Probing the redox states at the surface of electroactive nanoporous NiO thin films'. ACS Applied Materials & Interfaces, 6 (1):143-152.  
Muhammad M. Iqbal, Charlie P. Stallard, Denis P. Dowling, Miles M. Turner (2014) 'Three Dimensional Coupled Fluid-Droplet Model For Atmospheric Pressure Plasmas'. PLASMA PROCESSES AND POLYMERS .  
M. Donegan and D. P. Dowling (2013) 'Protein adhesion on water stable atmospheric plasma deposited acrylic acid coatings'. Surface and Coatings Technology .  
C. Contini, S. Valzacchi, M. O'Sullivan, C. Simoneau, D. P. Dowling and F. Monahan (2013) 'Overall migration and kinetics of release of antioxidant compounds from citrus extract-based active packaging'. Journal of Agricultural and Food Chemistry, 61 (49):12155-12163.  
D. P. Dowling (2013) 'Impact of a university spin-in company on academic research'. International Journal of Engineering Education, 29 (6):1-6.  
M. Lubwama , B. Corcoran, K. V. Rajani, C. S. Wong, J. B. Kirabira, A. Sebbit, K. A. McDonnell, D. P. Dowling, K. Sayers (2013) 'Raman analysis of DLC and Si-DLC films deposited on nitrile rubber'. Surface and Coatings Technology, 232 :521-527.  
C. Contini, M. G. Katsikogianni, F. T. O'Neill, M. O'Sullivan, F. Boland, D. P. Dowling, F. Monahan (2013) 'Storage stability of an antioxidant active packaging coated with Citrus extract following a plasma jet pre-treatment'. Food and Bioprocess Technology, 7 (8):2228-2240.  
Dr Donal Patrick Finn
Nasrabadi, M, Finn, D.P. (2014) 'Mathematical modeling of a low temperature low approach direct cooling tower for the provision of high temperature chilled water for conditioning of building spaces'. Applied Thermal Engineering, 64 (1-2):273-282.  
Professor Michael D Gilchrist
Rashid, B., Destrade, M. & Gilchrist, M.D. (2013) 'Mechanical characterization of brain tissue in tension at dynamic strain rates'. Journal of the Mechanical Behavior of Biomedical Materials .  
Rashid, B., Destrade, M. & Gilchrist, M.D. (2013) 'Mechanical characterization of brain tissue in simple shear at dynamic strain rates'. Journal of the Mechanical Behavior of Biomedical Materials, 28 (12):71-85.  
Ní Annaidh, A., Cassidy, M., Curtis, M., Destrade, M. & Gilchrist, M.D. (2013) 'A combined experimental and numerical study of stab-penetration forces'. Forensic science international, 233 (1-3):7-13.  
Nishizaki, K., Marino, W., Hoshizaki, T.B., Post, A., Oeur, A., Walsh, E.S., Gilchrist, M.D., and Kendall, M. (2013) 'Evaluation of dynamic response and brain deformation metrics using a monorail centric/non-centric protocol'. Journal of ASTM International .  
Post, A., Hoshizaki, T.B., Gilchrist, M.D., Brien, S., Cusimano & Marshall, S. (2013) 'The influence of dynamic response and brain deformation metrics on the occurrence of subdural hematoma in different regions of the brain'. Journal of neurosurgery .  
Professor Alojz Ivankovic
J. Mohan, N. Murphy, A. Ivankovic (2014) 'Mode I fracture toughness of co-cured and secondary bonded composite joints'. International Journal of Adhesion and Adhesives, 51 :13-22.  
P. Alveen, D. McNamara, D. Carolan, N. Murphy, A. Ivankovi?, (2014) 'Analysis of two-phase ceramic composites using micromechanical models'. Computational materials science, 92 :318-324.  
J. Mohan, A. Ramamorthy, A. Ivankovic, D. Dowling, N. Murphy (2014) 'Effect of an atmospheric pressure plasma treatment on the mode I fracture toughness of a co-cured composite joint'. The Journal of Adhesion, 90 (9):733-754.  
P. Cardiff, A. Karac, A. Ivankovic (2014) 'A large strain finite volume method for orthotropic bodies with general material orientations'. Computer Methods in Applied Mechanics and Engineering, 268 :318-335.  
D. McNamara, P. Alveen, D. Carolan, N. Murphy, A. Ivankovic (2014) 'Micromechanical Study of Strength and Toughness of Advanced Ceramics'. Procedia Materials Science, 3 :1810-1815.  
P. Cardiff, A. Karac, D. FitzPatrick, R. Flavin, A. Ivankovic (2013) 'Development of a Hip Joint Model for Finite Volume Simulations'. Annals of Biomedical Engineering .  
P. Alveen, D. McNamara, D. Carolan, N. Murphy, A. Ivankovic (2013) 'Micromechanical modelling of advanced ceramics with statistically representative synthetic microstructures'. Key Engineering Materials, 592-593 (2013-11):137-140.  
D. McNamara, P. Alveen, D. Carolan, N. Murphy, A. Ivankovic (2013) 'The role of microstructure on the fracture behaviour and statistics of advanced ceramics'. Key Engineering Materials, 577 - 578 :57-60.  
P. Alveen, D. McNamara, D. Carolan, N. Murphy, A. Ivankovic (2013) 'Micromechanical modelling of advanced ceramics using statistically representative microstructures'. Key Engineering Materials, 577-578 :53-56.  
Professor Chen-Ching Liu
J. Hong, C. C. Liu, and M. Govindarasu (2014) 'Integrated Anomaly Detection for Cyber Security of the Substations'. IEEE Transactions on Smart Grid, 5 (4):1643-1653.  
L. He, C. C. Liu, A. Pitto, and D. Cirio (2014) 'Distance Protection of AC Grid with HVDC-Connected Offshore Wind Generators'. IEEE Transactions on Power Delivery, 29 (2):493-501.  
L. He and C. C. Liu (2014) 'Parameter Identification with Pmus for Instability Detection in Power Systems with HVDC Integrated Offshore Wind Energy'. IEEE Transactions on Power Systems, 29 (2):775-784.  
S. Liu, Y. Hou, C. C. Liu, and R. Podmore (2014) 'The Healing Touch: Tools and Challenges for Smart Grid Restoration'. IEEE power and energy, 12 (1):54-63.  
A. Stefanov, C. C. Liu, and M. Govindarasu (2013) 'Modeling and Vulnerability Assessment of Integrated Cyber-Power Systems'. International Transactions On Electrical Energy Systems .  
Dr Neal Murphy
D. McNamara, P. Alveen, D. Carolan, N. Murphy, A. Ivankovic. (2014) 'Micromechanical study of strength and toughness of advanced ceramics'. Procedia Materials Science, 3 :1810-1815.  
Mohan, J., Ramamoorthy, A., Ivankovic, A., Dowling, D., Murphy, N. (2014) 'Effect of an atmospheric pressure plasma treatment on the mode I fracture toughness of a co-cured composite joint'. Journal Of Adhesion, 90 (9):733-754.  
Mohan, J., Ivankovic, A. and Murphy, N. (2014) 'Mode I fracture toughness of co-cured and secondary bonded composite joints'. International Journal of Adhesion and Adhesives, 51 :13-22.  
Stelzer, S., Brunner, A.J., Arguelles, A., Murphy, N., Cano, G.M. and Pinter, G. (2014) 'Mode I delamination fatigue crack growth in unidirectional fiber reinforced composites: Results from ESIS TC4 round-robins'. Engineering Fracture Mechanics, 116 :92-107.  
P. Alveen, D. McNamara, D. Carolan, N. Murphy, A. Ivankovic. (2014) 'An Embedded Microstructural Model for Predicting the Strength and Toughness of Multi-phase Ceramics'. Procedia Materials Science, 3 :1804-1809.  
Mohan, J., Ivankovic, A. and Murphy, N. (2013) 'Effect of prepreg storage humidity on the mixed-mode fracture toughness of a co-cured composite joint'. Composites Part A: Applied Science and Manufacturing, 45 :23-34.  
Alveen, P. and McNamara, D., Carolan, D., Murphy, N. and Ivankovic, A. (2013) 'Micromechanical modelling of advanced ceramics with statistically representative synthetic microstructures'. Key Engineering Materials, 592-593 :137-140.  
P. Alveen, D. Carolan, D. McNamara, N. Murphy, A. Ivankovic. (2013) 'Micromechanical modelling of ceramic based composites with statistically representative synthetic microstructures'. Computational materials science, 79 :960-970.  
McNamara, D., Alveen, P., Carolan, D., Murphy, N. and Ivankovic, A. (2013) 'The role of microstructure on the fracture behaviour and statistics of advanced ceramics'. Key Engineering Materials, 577-578 :57-60.  
Dr Aisling NíAnnaidh
A. NíAnnaidh, M. Cassidy, M. Curtis, M. Destrade, M.D. Gilchrist (2014) 'Towards a predictive assessment of stab-penetration forces¿, The American Journal of Forensic Medicine and Pathology'. The American journal of forensic medicine and pathology : official publication of the National Association of Medical Examiners .  
A. NíAnnaidh, M. Cassidy, M. Curtis, M. Destrade, M.D. Gilchrist (2013) 'A combined experimental and numerical study of stab-penetrations forces'. Forensic science international .  
Dr Eoin O'Cearbhaill
O'Cearbhaill, Eoin D and Ng, Kelvin S and Karp, Jeffrey M (2014) 'Emerging Medical Devices for Minimally Invasive Cell Therapy'. Mayo Clinic Proceedings, 89 (2):259-273.  
Pereira MJ, Lang N, Lee Y, Friehs I, Vasilyev NV, Feins EN, Ablasser K, O'Cearbhaill ED, Xu C, Fabozzo A, Padera R, Wasserman S, Freudenthal F, Ferreira LS, Langer R, Karp JM, del Nido PJ (2014) 'A blood-resistant surgical glue for minimally invasive repair of vessels and heart defects'. Science Translational Medicine, 6 (218).  
Dr William O'Connor
Samad Akbarzadeh, Fatemeh Eskandari, Hadis Tangestani, Somaieh, Tangerami Bagherinejad, Afshar Bargahi, Parviz Bazzi, Adel Daneshi, Azam Sahrapoor, William J. O'Connor, & Ali Reza Rahbar (2014) 'The Effect of Stevia Rebaudiana on Serum Omentin and Visfatin Level in STZ-Induced Diabetic Rats'. Journal of dietary supplements .  
Dr James O'Donnell
Edward Corry, James T. O'Donnell, Edward Curry, Daniel Coakley, Pieter Pauwels, and Marcus Keane (2014) 'Using Semantic Web Technologies to Access Soft AEC Data'. Advanced Engineering Informatics .  
Dr Kenneth Thomas Stanton
D. de Faoite, D.J. Browne, J.I. Del Valle Gamboa, K.T. Stanton (2014) 'Inverse estimate of heat flux on a plasma discharge tube to steady-state conditions using thermocouple data and a radiation boundary condition'. International Journal of Heat and Mass Transfer, 77 :564-576.  
Twomey, B., C.M. O ?Bradaigh, A. Doyle, P.J. Feerick, K.T. Stanton (2014) 'Use of carbon fibres for reinforcement of thin geopolymer cement sections'. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, 228 (3):208-216.  
KJ Roche, KT Stanton (2014) 'Measurement of fluoride substitution in precipitated fluorhydroxyapatite nanoparticles'. Journal of Fluorine Chemistry, 161 :102-109.  
Dunne, C., Twomey, B., O'Neill, L., Stanton, K.T (2014) 'Co-blasting of titanium surfaces with an abrasive and hydroxyapatite to produce coatings: surface and coating characterisation'. Journal of biomaterials applications, 28 (5):767-778.  


Back to Top

Conference Publications

Dr Eamonn Ambrose
Harke, K; Goelz, D R ; Ambrose, E (2014) Service operations resilience: A capability analysis based on firms¿ experiences with catastrophic events European Operations Management Association Conference,  
Dr Donal Patrick Finn
McKenna, P and Finn, D.P. (2014) Optimisation of Phase Change Material Thermal Energy Storage with a Ground Source Heat Pump Building Performance Simulation Association UK BSO14 Conference 2014, London, UK,  
Jones, A and Finn, D.P (2014) PCM Thermal Storage System Analysis Using EnergyPlus and BCVTB Int. Building Performance Simulation Association - Canada, eSim conference, Ottawa, Canada,  
Neu, O., Evon V., Oxizidis, S., Flynn, D., and Finn, D.P. (2014) Natural ventilation in residential building archetypes: a stochastic approach based on occupant behaviour and thermal comfort Int. Building Performance Simulation Association - Canada (IBPSA-Canada) eSim conference 2014, Ottawa, Canada,  
Pallonetto, F., Oxizidis, F. and Finn . D.P. (2014) Exploring the flexibility potential of a smartgrid ready house using building simulation software Int. Building Performance Simulation Association - Canada (IBPSA-Canada) eSim conference, Ottawa, Canada,  
Neu, O., Sherlock, B. Oxizidis, S., Flynn, D. and Finn, D.P (2014) Developing building archetypes for electrical load shifting assessment: Analysis of Irish residential stock Chartered Institution of Building Services Engineers (CIBSE) & American Society of Heating, Refrigerating and Air Conditioning Engineers (ASHRAE) Technical Symposium, Dublin, Ireland,  
Professor Alojz Ivankovic
P. Alveen, D. McNamara, D. Carolan, N. Murphy, A. Ivankovic (2014) An embedded microstructural model for predicting the strength and toughness of multi-phase ceramics 20th European Conference on Fracture, Trondheim, Norway,  
D. McNamara, P. Alveen, D. Carolan, N. Murphy, A. Ivankovic (2014) Micromechanical study of strength and toughness of advanced ceramics 20th European Conference on Fracture, Trondheim, Norway,  
D. Quan, A. Ivankovic (2014) Role of particle volume fraction on properties and toughness of epoxy modified by core-shell rubber particles Irish Polymer & Materials Conference, UCD, Dublin,  
T. Stefanov, A. Ivankovic, N. Murphy (2014) Mechanical and fracture characterization of rubber-toughened cyanoacrylate adhesive joints Irish Polymer & Materials Conference, UCD, Dublin,  
M. Leonard, N. Murphy, A. Ivankovic (2014) Modelling nano-particle loading and debonding in a rubber-toughened adhesive using the finite volume method Irish Polymer & Materials Conference, UCD, Dublin,  
M. Conroy, B.F. Sørensen, A. Ivankovic (2014) Combined Numerical and Experimental Investigation of Mode-Mixity in Beam Like Geometries Proceedings of the 37th Annual Meeting of the Adhesion Society, San Diego, CA,  
P. Cardiff, M. Leonard, N. Murphy and A. Ivankovic (2014) Fracture Toughness Optimization of Nano-Toughened Structural Adhesives: A Representative Volume Element Approach Proceedings of the 37th Annual Meeting of the Adhesion Society, San Diego, CA,  
D. Quan, Z. Tukovic, D. McAuliffe, N. Murphy and A. Ivankovic (2014) An Investigation of Toughness Mechanisms and Synergistic Effects in Nano-Toughened Epoxy Adhesives Proceedings of the 37th Annual Meeting of the Adhesion Society, San Diego, CA,  
D. Quan, M. Leonard, D. McAuliffe, N. Murphy, A. Ivankovic (2013) The effect of particle volume fraction on the fracture toughness of nano-toughened epoxy adhesives IMS/ISSEC Symposium, UCD, Dublin,  
M. Conroy, B. F. Sorensen, A. Ivankovic (2013) Combined numerical and experimental assessment of mixed mode partitioning in beam-like geometries IMS/ISSEC Symposium, UCD, Dublin,  
D. Carolan, D. McNamara, P. Alveen, N. Murphy, A. Ivankovic (2013) A combined experimental numerical investigation into the role of microstructure on the fracture pf polycrystalline Cubic Boron Nitride IMS/ISSEC Symposium, UCD, Dublin,  
P. Cardiff, A. Karac. A. Ivankovic (2013) An open-source finite volume method for computational solid mechanics IMS/ISSEC Symposium, UCD, Dublin,  
A. Safari, Z. Tukovic, E. Casey, A. Ivankovic (2013) Cohesive Zone Modelling of Biofilm-Glass Interfacial failure IMS/ISSEC Symposium, UCD, Dublin,  
M. Conroy, A. Ivankovic, A. Karac, N. Murphy, J.G Williams (2013) Numerical Analysis of mode mixity in Beam Like Geometries using cohesive zone 12th International Conference on the Science and Technology of Adhesion and Adhesives, York, UK,  
P. Alveen, D. McNamara, D. Carolan, N. Murphy, A. Ivankovic (2013) Micromechanical modelling of superhard materials using statistically representative microstructures 12th International Conference on Fracture and Damage Mechanics, Sardinia, Italy,  
D. McNamara, P. Alveen, D. Carolan, N. Murphy, A. Ivankovic (2013) The role of microstructure on the fracture behaviour of super-hard materials 12th International Conference on Fracture and Damage Mechanics, Sardinia, Italy,  
T. Stefanov, A. Ivankovic, N. Murphy (2013) Fracture Characterization of a Rubber-Toughened Cyanoacrylate Adhesive for Composite-to-Composite and Metal-to-Metal Joints 12th International Conference on the Science and Technology of Adhesion and Adhesives, York, UK,  
D. Quan, D. McAuliffe, A. Karac, N. Murphy, A. Ivankovic (2013) The Fracture Behaviour of a Nano-modi?ed Structural Epoxy Adhesive 12th International Conference on the Science and Technology of Adhesion and Adhesives, York, UK,  
Professor Chen-Ching Liu
A. Stefanov and C. C. Liu (2014) Cyber-Physical System Security and Impact Analysis IFAC Congress, Capetown, South Africa, 1 - 6  
Y. Xu, H. Gao, Y. Chen, and C. C. Liu (2014) A Fast EMT Simulation Method for Control and Protection Studies of Microgrids IEEE Power and Energy Society General Meeting, National Harbor, MD, USA, 1 - 5  
J. Hong, C. C. Liu, and M. Govindarasu (2014) Detection of Cyber Intrusions Using Network-Based Multicast Messages for Substation Automation IEEE PES Innovative Smart Grid Technologies, Washington D.C, 1 - 5  
Dr James O'Donnell
Vladimir Bazjanac, Tobias Maile, N. Mrazovi?, Junia Compostella, James O'Donnell, Sergio Tarrantino, and Cody Rose (2014) Streamlining the Value Engineering Process and Its Impact on Building Energy Performance ICCCBE 2014 and 2014 CIB W078,  
Pieter Pauwels Edward Corry and James O'Donnell (2014) Representing the SimModel in the Web Ontology Language CCCBE2014 and 2014 CIB W078, Walt Disney World in Orlando, Florida, USA,  


Back to Top

Published Reports

Dr William O'Connor
McKeown, David; O'Connor, William (2013) Wave Based Control of the DELIAN Arm. ESA, Estec.  


Back to Top