car

UCD School of Mechanical and Materials Engineering

UCD School of Mechanical and Materials Engineering - Research Publications 2015/16

Below is the list of research publications for the UCD School of Mechanical and Materials Engineering in the academic year 2015/16



Books Chapter

Dr Eamonn Ambrose
Onofrei G., Ambrose E., Wiengarten F. and Fynes B. (2015) 'The interplay between environmental and quality/lean practices in supply chains' In: Ahrweiler, P., N. Gilbert and A. Pyka (eds). Joining Complexity Science and Social Simulation for Innovation Policy: Agent-based modelling using the SKIN platform. Cambridge, UK: Cambridge Press. , pp.76-107  
Professor Denis Dowling
Abourayana, H. Dowling D.P. (2015) 'Plasma Processing for Tailoring the Surface Properties of Polymers' In: Mahmood Aliofkhazraei (eds). Surface Energy. -: Intech-Open Access Publisher. , pp.123-152  
Professor Alojz Ivankovic
D. Carolan, A. Ivankovic (2016) 'Fracture Toughness of Hard and Superhard Materials: Testing Methods and Limitations' In: V. Kanyanta (eds). Microstructure-Property Correlations for Hard, Superhard, and Ultrahard Materials. Switzerland: Springer.  

Back to Top

Peer Reviewed Journals

Dr Manuel Abad Roldan
Cionea, C Abad, MD Aussat, Y Frazer, D Gubser, AJ Hosemann, P (2016) 'Oxide scale formation on 316L and FeCrAl steels exposed to oxygen controlled static LBE at temperatures up to 800°C'. Solar Energy Materials and Solar Cells, 144 :235-246.  
Huang, Z Abad, MD Ramsey, J Rebelo de Figueiredo, M Kaoumi, D Li, N Asta, M Gronbech-Jensen, N Hosemann, P (2016) 'A high temperature mechanical property study on PH 13-8 Mo maraging steel'. Materials Science and Engineering A, 651 :574-582.  
Vo, H Reichardt, A Howard, C Abad, MD Kaoumi, D Chou, P Hosemann, P (2015) 'Small Scale Mechanical Testing on Proton Beam-Irradiated 304 SS from Room Temperature to Reactor Operation Temperature'. JOM, :1-6. Available Online  
Koch, S Abad, MD Renhart, S Antrekowitsch, H Hosemann, P (2015) 'A high temperature nanoindentation study of Al-Cu wrought alloy'. Materials Science and Engineering A, 644 :218-224.  
Dr Eamonn Ahearne
Lupoia, R Stensona, C McDonnell, K Dowling, D Ahearne, E (2016) 'Functionalising Polymer Surfaces with Cold Spray for Applications in Bioenvironments'. CIRP Annals - Manufacturing Technology .  
Liu, J O'Connor, W Ahearne, E Cai, Y Brabazon, D Byrne, G (2016) 'A Comprehensive Characterisation and Identification Approach for Piezoelectric Flextensional Actuators'. Smart Materials and Structures .  
Baron, S Ahearne, E (2016) 'An Investigation of Force Components in Orthogonal Cutting of Medical Grade Cobalt Chromium Alloy (ASTM F1537)'. Proceedings of the Institution of Mechanical Engineers, Part H: Journal of Engineering in Medicine .  
Ahearne, E Baron, S O'Neill, E O'Connell, C (2016) 'Orthogonal Cutting of Medical Grade Cobalt Chromium Alloy (ASTM F75)'. CIRP Journal of Manufacturing Science and Technology .  
McParland, D Baron, S O'Rourke, S Dowling, D Ahearne, E Parnell, A (2016) 'Prediction of Tool Wear in Turning of Medical Grade Cobalt Chromium Molybdenum Alloy (ASTM F75) Using Data Analytics'. Journal of Intelligent Manufacturing .  
Assoc Professor David Browne
Srivastava, A.P., ?tefanov. T., Srivastava, D., Browne, D.J. (2016) 'Multiple structural relaxation processes in Zr44Cu40Al8Ag8 bulk metallic glass'. Materials Science and Engineering A, 651 :69-74.  
Browne, D.J., Tong, M., Meagher, P., Murphy, A.G. (2016) 'Research-informed education in Materials Science and Engineering: a Case Study'. Journal of Materials Education, 38 (1-2):1-14.  
Meagher, P., O'Cearbhaill, E.D., Byrne, J.H., Browne, D.J. (2016) 'Bulk metallic glasses for implantable medical devices and surgical tools'. Advanced Materials, published online .  
Murphy, A.G., Mathiesen, R.H., Houltz, Y., Li, J., Lockowandt, C., Henriksson, K., Zimmermann, G., Melville, N., Browne, D.J. (2016) 'XRMON-SOL: Isothermal Equiaxed Solidification of a Grain Refined Al-20wt%Cu Alloy'. Journal of Crystal Growth, 440 :38-46.  
Zhang, N., Srivastava, A.P., Browne, D.J., Gilchrist, MD. (2016) 'Performance of nickel and bulk metallic glass as tool inserts for the microinjection molding of polymeric microfluidic devices'. Journal of Materials Processing Technology, 231 :288-300.  
de Faoite, D., Browne, D.J., Del Valle Gamboa, J.I., Stanton, K.T. (2016) 'Thermo-structural modelling of a plasma discharge tube for electric propulsion'. Applied Thermal Engineering, 98 :541-552.  
Kaiser, R., Williamson, K., O¿Brien, C., Ramirez-Garcia, S., Browne, D.J. (2015) 'Effects of hot isostatic pressing and heat treatment on cast cobalt alloy'. Materials Science and Technology, 31 (11):1298-1304.  
Dr Philip Cardiff
P. Cardiff, Z. Tukovic, H, Jasak, A. Ivankovi? (2016) 'A Block-Coupled Finite Volume Methodology for Linear Elasticity and Unstructured Meshes'. Computers and Structures .  
P. Cardiff, Z. Tukovic, P. De Jaeger, M. Clancy, A. Ivankovi? (2016) 'A Lagrangian Cell-Centred Finite Volume Method for Metal Forming Simulation'. International Journal for Numerical Methods in Engineering . Available Online  
B. Sekutkovski, I. Kostic, A. Simonovic, P. Cardiff, V. Jazarevic (2015) 'Three-dimensional fluid¿structure interaction simulation with a hybrid RANS-LES turbulence model for applications in transonic flow domain'. Aerospace Science and Technology .  
A Safari, Z Tukovic, P Cardiff, M Walter, E Casey, A Ivankovic (2015) 'Interfacial separation of a mature biofilm from a glass surface- A combined experimental and cohesive zone modelling approach'. Journal of the Mechanical Behavior of Biomedical Materials . Available Online  
Dr Diego Carou Porto
R. Ferreira J. Rehor C.H. Lauro D. Carou J.P. Davim (2016) 'Analysis of the hard turning of AISI H13 steel with ceramic tools based on tool geometry: surface roughness, tool wear and their relation'. Journal of the Brazilian Society of Mechanical Sciences and Engineering .  
L.V. Pinho D. Carou J.P. Davim (2016) 'Comparative study of the performance of diamond-coated drills on the delamination in drilling of carbon fiber reinforced plastics: Assessing the influence of the temperature of the drill'. Journal of Composite Materials, 50 (2):179-189.  
C.H. Lauro L.C. Brandão D. Carou J.P. Davim (2016) 'Specific cutting energy employed to study the influence of the grain size in the micro-milling of the hardened AISI H13 steel'. International Journal of Advanced Manufacturing Technology .  
L.V. Pinho D. Carou J.P. Davim (2016) 'Delamination of carbon fiber reinforced plastics: analysis of the drilling method'. Indian Journal of Engineering and Materials Sciences .  
D. Carou E.M. Rubio C.H. Lauro J.P. Davim (2016) 'The effect of minimum quantity lubrication in the intermittent turning of magnesium based on vibration signals'. Measurement: Journal of the International Measurement Confederation .  
Professor Denis Dowling
Abourayana, H.M. Milosavljevic, V. Dobbyn, P. Cullen, P.J. Dowling, D.P. (2016) 'Investigation of a scalable barrel atmospheric plasma reactor for the treatment of polymer particles'. Surface and Coatings Technology, SCT21438 . Available Online  
Dowling, D.P. Maher, S. Law, V.J. Ardhaoui, M. Stallard, C. Keenan, A. (2016) 'Modified drug release using atmospheric pressure plasma deposited siloxane coatings'. Journal of Physics D - Applied Physics, 49 (36):364005-364014. Available Online  
Congiu, M. Bonomo, M. Marco, M.L.D. Dowling, D.P. Di Carlo, A. Dini, D. Graeff, C.F.O. (2016) 'Cobalt sulfide as counter electrode in p-type dye-sensitized solar cells'. ChemistrySelect, 1 (11):2808-2815. Available Online  
Stallard, C.P. Solar, P. Biederman, H. Dowling D.P. (2016) 'Deposition of non?fouling PEO?like coatings using a low temperature atmospheric pressure plasma jet'. Plasma Processes and Polymers, 13 (2):241-252. Available Online  
McParland, D Baron, S O'Rourke, S Dowling, D Ahearne, E Parnell, A (2016) 'Prediction of Tool Wear in Turning of Medical Grade Cobalt Chromium Molybdenum Alloy (ASTM F75) Using Data Analytics'. Journal of Intelligent Manufacturing .  
Lupoi, R. Stenson, C. McDonnell, K. Ahearne, E. Dowling D.P. (2016) 'Functionalizing polymer surfaces with Cold Spray for applications in bioenvironments'. CIRP Annals - Manufacturing Technology .  
Abourayana, H.M. Barry, J.N. Dobbyn P. Dowling,D.P. (2015) 'Comparison between the Performance of Fluidized Bed and Barrel Rectors for the Plasma Activation of Polymer Particles'. Journal of Mineral, Metal and Materials Engineering, 1 :57-64. Available Online  
Awais, M. Dowling, D. Decker, F. Dini, D. (2015) 'Photoelectrochemical properties of mesoporous NiOx deposited on technical FTO via nanopowder sintering in conventional and plasma atmospheres'. SpringerPlus, 4 (564):1-24. Available Online  
Assoc Professor Donal Patrick Finn
Neu, O., Oxizidis, S., Flynn, D. and Finn, D. (2016) 'Utilising Time of Use Surveys to Predict Domestic Hot Water Consumption and Heat Demand Profiles of Residential Building Stocks'. British Journal of Environment and Climate Change, 6 (2):77-89.  
Pallonetto, F Oxizidis, S Milano, F Finn, D (2016) 'The Effect of Time-of-use Tariffs on the Demand Response Flexibility of an All-electric Smart-grid-ready Dwelling'. Energy and Buildings, 128 :56-67.  
DS Kapetanakis, E Mangina, EH Ridouane, K Kouramas, D Finn (2015) 'Selection of Input Variables for a Thermal Load Prediction Model'. Energy Procedia, 76 :3001-3006.  
Goy, S. Finn, D.P. (2015) 'Estimating Demand Response Potential in Building Clusters'. Energy Procedia, 78 :3391-3396.  
Giovanni Tardioli, Ruth Kerrigan, Mike Oates, O¿Donnell James, Donal Finn (2015) 'Data Driven Approaches for Prediction of Building Energy Consumption at Urban Level'. Energy Procedia, :3378-3383.  
Despoina Christantoni, Damian Flynn, Donal P Finn (2015) 'Modelling of a Multi-purpose Commercial Building for Demand Response Analysis'. Energy Procedia, 78 :2166-2171.  
Mr Paolo Fiorini Fiorini
Paolo Fiorini, Gerry Byrne (2016) 'The influence of built-up layer formation on cutting performance of GG25 grey cast iron'. CIRP Annals - Manufacturing Technology .  
Professor Michael D Gilchrist
Pierrat, B., MacManus, D., Gilchrist, M.D. &amp Murphy, J.G. (2016) 'Finite element implementation of a new model of slight compressibility for transversely isotropic materials'. Computer Methods in Biomechanics and Biomechanical Engineering, 19 (7):745-758.  
Su, Q. &amp Gilchrist, M.D. (2016) 'Demolding forces for micron sized features during micro-injection molding'. Polymer Engineering and Science, 56 (7):810-816.  
Post, A., Karton, C., Hoshizaki, T.B., Gilchrist, M.D. &amp Bailes, J. (2016) 'Evaluation of the protective capacity of baseball helmets for concussive impacts'. Computer Methods in Biomechanics and Biomechanical Engineering, 19 (4):366-375.  
Quanliang Su, Nan Zhang, Michael D Gilchrist (2016) 'The use of variotherm systems for micro injection molding'. Journal of Applied Polymer Science .  
Seong Ying Choi, Nan Zhang, J.P.Toner, G. Dunne, Michael D. Gilchrist (2016) 'Vacuum venting enhances the replication of nano/micro-features in microinjection molding process'. ASME Journal of Micro and Nano-Manufacturing, 4 (2):021005.  
Zhang, N., Srivastava, A.P., Browne, D.J., Gilchrist, MD. (2016) 'Performance of nickel and bulk metallic glass as tool inserts for the microinjection molding of polymeric microfluidic devices'. Journal of Materials Processing Technology, 231 :288-300.  
MacManus, D.B., Pierrat, B., Murphy, J.G. &amp Gilchrist, M.D. (2016) 'Mechanical characterization of the P56 mouse brain under large-deformation dynamic indentation'. Scientific Reports, 6 :21569.  
Choi S.Y., Habimana O., Flood P., Reynaud E.G., Rodriguez B.J., Zhang N., Casey E., and Gilchrist M.D. (2016) 'Adhesive response of Pseudomonas fluorescens bacterial cells and MDCK mammalian cells to injection molded polymer surfaces of varying roughness'. Colloids and Surfaces B: Biointerfaces, 145 :46-54.  
Ni Annaidh, A., Cassidy, M., Curtis, M., Destrade, M. &amp Gilchrist, M.D. (2015) 'Towards a predictive assessment of stab-penetration forces'. American Journal of Forensic Medicine and Pathology, 36 (3):162-166.  
MacManus, D., Pierrat, B., Murphy, J.G. &amp Gilchrist, M.D. (2015) 'Dynamic mechanical properties of murine brain tissue using micro-indentation'. Journal of Biomechanics, 48 (12):3213-3218.  
Dr Vincent Joseph Hargaden
Hargaden, V. &amp Ryan, J.K. (2015) 'Resource Planning in Engineering Services Firms'. IEEE Transactions on Engineering Management, 62 (4):578-590.  
Dr Donal Holland
Aitamurto, T Holland, D Hussain, S (2015) 'Three layers of openness in design: the open paradigm in design research'. Design Issues, 31 (4). Available Online  
Professor Alojz Ivankovic
A. Safari, Z. Tukovic, M. Walter, E. Casey (2016) 'Interfacial separation of a mixed culture mature biofilm from a glass surface ¿ A combined experimental and cohesive zone modelling study'. Journal of the Mechanical Behavior of Biomedical Materials, 54 :205-218.  
Huynh, M., Laefer, D., Murphy, N., Ivankovic, A. (2016) 'Computational Modelling of Crack Propagation in Concrete due to Expansion Cements'. Engineering Structures .  
P. Cardiff, Z. Tukovic, P. De Jaeger, M. Clancey, A. Ivankovic (2016) 'A Lagrangian cell-centered finite volume method for metal forming simulation'. International Journal for Numerical Methods in Engineering .  
P. Cardiff, Z. Tukovic, H. Jasak, A. Ivankovic (2016) 'A Block-Coupled Finite Volume Methodology for Linear Elasticity and Unstructured Meshes'. Computers and Structures, 175 :122.  
D. McNamara, D. Carolan, P. Alveen, N. Murphy, A. Ivankovic (2016) 'Effect of loading rate on the fracture toughness and failure mechanisms of polycrystalline diamond (PCD'. International Journal of Refractory Metals and Hard Materials, 60 :10.  
D. Carolan, A.J. Kinloch, A. Ivankovic, S. Sprenger, A.C. Taylor (2016) 'Mechanical and fracture performance of carbon fibre reinforced composites with nanoparticle modified matrices'. Procedia Engineering, 96 :103.  
D. Carolan, A. Ivankovic, A.J. Kinloch, S. Sprenger, A.C. Taylor (2016) 'Toughening of epoxy-based hybrid nanocomposites'. Polymer, 97 :190.  
D. McAuliffe, A. Karac, N. Murphy, A. Ivankovic (2016) 'The measurement of damage initiation, particle adhesion and cohesive strength for a nano-toughened epoxy'. International Journal of Adhesion and Adhesives, 70 :73.  
T. Stefanov, B. Ryan, A. Ivankovic, N. Murphy (2016) 'Mechanical bulk properties and fracture toughness of composite-to-composite joints of an elastomer-toughened ethyl cyanoacrylate adhesive'. International Journal of Adhesion and Adhesives, 68 :155.  
McNamara, D., Alveen, P., Damm, S., Carolan, D., Rice, J.H., Murphy, N. and Ivankovic, A. (2015) 'A Raman spectroscopy investigation into the influence of thermal treatments on the residual stress of polycrystalline diamond'. International Journal of Refractory Metals and Hard Materials, 52 :114-122.  
Dr Neal Murphy
T. Stefanov, B. Ryan, A. Ivankovic, N. Murphy (2016) 'Mechanical bulk properties and fracture toughness of composite-to-composite joints of an elastomer-toughened ethyl cyanoacrylate adhesive'. International Journal of Adhesion and Adhesives, 68 :142-155.  
McNamara, D., Alveen, P., Damm, S., Carolan, D., Rice, J.H., Murphy, N. and Ivankovic, A. (2015) 'A Raman spectroscopy investigation into the influence of thermal treatments on the residual stress of polycrystalline diamond'. International Journal of Refractory Metals and Hard Materials, 52 :114-122.  
Dr Aisling Ní Annaidh
Zhang H, Zhao TDuffy PDong YAnnaidh ANO'Cearbhaill EWang W (2015) 'Hydrolytically Degradable Hyperbranched PEG-Polyester Adhesive with Low Swelling and Robust Mechanical Properties'. Advanced healthcare materials, 4 (15):2260-2268.  
Ni Annaidh, A., Cassidy, M., Curtis, M., Destrade, M. &amp Gilchrist, M.D. (2015) 'Towards a predictive assessment of stab-penetration forces'. American Journal of Forensic Medicine and Pathology, 36 (3):162-166.  
Dr Eoin O'Cearbhaill
Meagher, P., O'Cearbhaill, E.D., Byrne, J.H., Browne, D.J. (2016) 'Bulk metallic glasses for implantable medical devices and surgical tools'. Advanced Materials, published online .  
Zhang, H Zhao, T Duffy, P Dong, Y Annaidh, A N O'Cearbhaill, E Wang, W (2015) 'Hydrolytically Degradable Hyperbranched PEG-Polyester Adhesive with Low Swelling and Robust Mechanical Properties'. Advanced healthcare materials, 4 (15):2260-2268.  
Dr James O'Donnell
Edward Corry, Pieter Pauwels, Shushan Hu, Marcus Keane and James O'Donnell (2015) 'A performance assessment ontology for the environmental and energy management of buildings'. Automation in Construction, 57 (9):249-259. Available Online  
Dr Vikram Pakrashi
Wright CS, Pakrashi V and Murphy J (2016) 'Dynamic Effects of Anchor Positional Tolerance on Tension Moored Floating Wind Turbine'. Journal of Physics: Conference Series .  
Cahill P, Jaksic V, Keane J, O¿Sullivan A, Mathewson A, Ali SF and Pakrashi V (2016) 'Effect of Road Surface, Vehicle and Device Characteristics on Energy Harvesting from Bridge-Vehicle Interactions'. Computer-Aided Civil and Infrastructure Engineering .  
Jaksic V, Mandic DP, Karoumi R, Basu B and Pakrashi V (2016) '). Estimation of nonlinearities from pseudodynamic and dynamic responses of bridge structures using the Delay Vector Variance method'. Physica A: Statistical Mechanics and its Applications .  
Jaksic V, Mandic DP, Ryan K, Basu B and Pakrashi V (2016) '). A Comprehensive Study of the Delay Vector Variance Method for Quantification of Nonlinearity in Dynamical Systems'. Royal Society Open Science .  
Noble D, Nogal M, O¿Connor A and Pakrashi V (2016) 'The effect of prestress force magnitude and eccentricity on the natural bending frequencies of uncracked prestressed concrete beams'. Journal of Sound and Vibration .  
Pakrashi V, Fitzgerald P, O'Leary M, Jaksic V, Ryan K and Basu B (2016) 'Assessment of Structural Nonlinearities Employing Extremes of Dynamic Responses'. JVC/Journal of Vibration and Control .  
Srbinovski B, Magno M, Edwards Murphy F, Pakrashi V and Popovici E (2016) 'An Energy Aware Adaptive Sampling Algorithm for Energy Harvesting WSN with Energy Hungry Sensors'. Sensors .  
Assoc Professor Kenneth Thomas Stanton
Laefer, D., Kennedy, J., O'Flynn, K., Stanton, K. (2015) 'Structure - Property Relationships in Microcrystalline Waxes for Museum Seismic Protection Applications'. Progress in Rubber, Plastics and Recycling Technology, 31 (4):281-298.  
Cathal D¿Arcy, Mark Ruddy, John Haines, John Gibbons and Kenneth T. Stanton (2015) 'The effect of repeated post weld heat treatment on low carbon steel ASTM A216WCB'. Proceedings Of The Institution Of Mechanical Engineers Part L-Journal Of Materials-Design And Applications, 229 :522-525.  

Back to Top

Other Journals

Professor Michael D Gilchrist
Zhang, N. &amp Gilchrist, M.D. (2016) 'The effects of miniaturization and processing on microinjection moldings' Rubber, Fibres, Plastics International, 11 (2):116-117.  
Dr Eoin O'Cearbhaill
Hannah Craddock, James Jones, Eoin O'Cearbhaill (2015) 'DEVELOPING PNEUMATIC MUSCLES AND A CONTROL SYSTEM TO OPERATE THEIR ACTUATION USING THE SOFT ROBOTICS TOOLKIT' Irish Journal of Medical Science .  

Back to Top

Conference Publications

Dr Eamonn Ahearne
Byrne, G Ahearne, E Cotterell, M Mullany, B O¿Donnell, G Sammler, F (2016) High Performance Cutting in the New Era of Digital Manufacturing ¿ A Roadmap 7th CIRP Conference on High Performance Cutting HPC2016, Chemnitz, Germany 2016,  
Baron, S. and Ahearne, E (2015) An Investigation of Force Components in Orthogonal Cutting of Medical Grade Cobalt Chromium Alloy (ASTM F1537) Proceedings of the 15th Computer-Aided Production Engineering (CAPE15) Conference, Edinburgh 3rd- 4th November, 2015,  
Assoc Professor David Browne
Meagher, P., Jarvis, D.J., Voice, W., Browne, D.J. (2016) A novel technique for thermoplastically forming functional BMG parts with complex 3D geometries and multi-scale features TMS Annual Meeting &amp Exhibition, Nashville, TN, USA,  
Dr Philip Cardiff
Dongkeun Lee, Philip Cardiff, Eric C. Bryant, Ripudaman Manchanda, Haotian Wang, Mukul M. Sharma (2015) A New Model for Hydraulic Fracture Growth in Unconsolidated Sands with Plasticity and Leak-Off SPE Annual Technical Conference and Exhibition, Houston, Texas, USA, Available Online  
Assoc Professor Donal Patrick Finn
Beagon, Paul, Warren, Joe, Finn, Donal, O'Donnell, James T. (2016) Next generation building performance metrics to enable energy systems integration 12th REHVA World Congress,  
Kapetanakis D., Mangina E., Ridouane E.H., Kouramas K., Finn D.P (2016) Forecasting Commercial Building Heating Loads: A Comparison Using Real and Synthetic Datasets CLIMA 2016, Available Online  
Kapetanakis D.S., Mangina E., Ridouane E.H., Kouramas K., Finn D. (2015) Comparison of Predictive Models for Forecasting Building Heating Loads 14th International Conference of the International Building Performance Simulation Association,  
Professor Michael D Gilchrist
Gilchrist, M.D. &amp Zhang, N. (2016) Polymer injection molding of micro/nano structured devices for disposable point-of-care diagnostic applications ICTAM: International Congress for Theoretical &amp Applied Mechanics,  
Gilchrist, M.D. (2016) ., Use of student competitions to reinforce the learning experience in freshman mechanics education ICTAM, International Congress for Theoretical &amp Applied Mechanics,  
Dr Vincent Joseph Hargaden
Gleeson, F. &amp Hargaden, V. (2015) Improving Knowledge Worker Efficiency Proceedings of the IEEE International Symposium on Technology and Society (ISTAS),  
Professor Alojz Ivankovic
D. Quan, Z. Tukovic, P. Cardiff, N. Murphy, A. Ivankovic (2016) Effects of CSR nano-particles on fracture behaviour of Epoxy resin: A combined multi-scale experimental-numerical study 16th International Conference on New Trends in Fatigue and Fracture (NT2F16),  
Dr Neal Murphy
T. Stefanov, B. Ryan, A. Ivankovic, N. Murphy (2016) Bulk properties and fracture characterization of an elastomer-toughened cyanoacrylate adhesive 39th Annual Meeting of the Adhesion Society,  

Back to Top