UCD School of Mechanical and Materials Engineering

UCD School of Mechanical and Materials Engineering - Research Publications 2019/20

Below is the list of research publications for the UCD School of Mechanical and Materials Engineering in the academic year 2019/20



Books

Dr Vikram Pakrashi
CERI-ITRN2018 P (2018)  Civil Engineering Research in Ireland 2018 Conference Proceedings. Dublin: Civil Engineering Research Association of Ireland   
Ghosh B; O'Byrne M; Schoefs F; Pakrashi V (2018)  Image Based Damage Assessment for Underwater Inspections. A Primer – From Theory to Implementation. Taylor and Francis   

Back to Top

Book Chapters

Professor Denis Dowling
E.J. Ekoi, M. Awais, D. Dowling (2018) 'Microwave Plasmas as a Processing Tool for Tailoring the Surface Properties of Ceramic Coatings' In: Recent Advances in Porous Ceramics. edited by Uday Basheer, IntechOpen  
Assoc Professor David Timoney
Kashevnik A; Pilla F; Russo G; Timoney D; Sweeney S; Shorten R; Ordonez-Hurtado R (2018) 'Context-Based Cyclist Intelligent Support: An Approach to e-Bike Control Based on Smartphone Sensors' In:  Internet of Things, Smart Spaces, and Next Generation Networks and Systems 18th International Conference, NEW2AN 2018, and 11th Conference, ruSMART 2018, St. Petersburg, Russia, August 27–29, 2018, Proceedings.: Springer. , pp.16-22 Available Online  

Back to Top

Journal Articles

Dr Eamonn Ahearne
Ahearne E; Baron S (2017) 'Fundamental mechanisms in orthogonal cutting of medical grade cobalt chromium alloy (ASTM F75)'. CIRP Journal of Manufacturing Science and Technology 19 :1-6. Available Online  
Mr Barry Brophy
Brophy B; Guerin S (2018) 'Stories in conversations and presentations–a comparative study'. Innovations in Education and Teaching International 55 (1) :101-110. Available Online  
Professor Gerald Byrne
Byrne G; Dimitrov D; Monostori L; Teti R; van Houten F; Wertheim R (2018) 'Biologicalisation: Biological transformation in manufacturing'. CIRP Journal of Manufacturing Science and Technology 21 :1-32. Available Online  
Dr Paul Cahill
Cahill P; Hazra B; Karoumi R; Mathewson A; Pakrashi V (2018) 'Data of piezoelectric vibration energy harvesting of a bridge undergoing vibration testing and train passage'. Data in Brief 17 :261-266. Available Online  
Cahill P; Hazra B; Karoumi R; Mathewson A; Pakrashi V (2018) 'Vibration energy harvesting based monitoring of an operational bridge undergoing forced vibration and train passage'. Mechanical Systems and Signal Processing 106 :265-283. Available Online  
Buckley T; Watson P; Cahill P; Jaksic V; Pakrashi V (2018) 'Mitigating the structural vibrations of wind turbines using tuned liquid column damper considering soil-structure interaction'. Renewable Energy 120 :322-341. Available Online  
Cahill P; Mathewson A; Pakrashi V (2018) 'Experimental Validation of Piezoelectric Energy-Harvesting Device for Built Infrastructure Applications'. Journal of Bridge Engineering 23 (8). Available Online  
Cahill P; Pakrashi V; Sun P; Mathewson A; Nagarajaiah S (2018) 'Energy harvesting techniques for health monitoring and indicators for control of a damaged pipe structure'. Smart Structures and Systems 21 (3) :287-303. Available Online  
Dr Philip Cardiff
Manchanda R; Bryant EC; Bhardwaj P; Cardiff P; Sharma MM (2018) 'Strategies for effective stimulation of multiple perforation clusters in horizontal wells'. SPE Production and Operations 33 (3) :539-556.  
Quan D; Cardiff P; Murphy N; Ivankovic A (2018) 'Damage behaviour of nano-modified epoxy adhesives subject to high stress constraint'. Journal of Adhesion 94 (5) :387-405. Available Online  
Rubin MB; Cardiff P (2017) 'Advantages of formulating an evolution equation directly for elastic distortional deformation in finite deformation plasticity'. Computational Mechanics 60 (5) :703-707. Available Online  
Miles Rubin, Philip Cardiff (2017) 'Advantages of formulating an evolution equation directly for elastic distortional deformation in finite deformation plasticity'. Computational Mechanics 60 (5) :703-707. Available Online  
Quan D; Murphy N; Cardiff P; Ivankovic A (2018) 'The intrinsic fracture property of a rubber-modified epoxy adhesive: Geometrical transferability'. Engineering Fracture Mechanics . Available Online  
Ling C; Ivens J; Cardiff P; Gilchrist MD (2018) 'Deformation response of EPS foam under combined compression-shear loading. Part I: Experimental design and quasi-static tests'. International Journal of Mechanical Sciences 144 :480-489. Available Online  
Tuković Ž; Jasak H; Karač A; Cardiff P; Ivanković A (2018) 'Openfoam finite volume solver for fluid-solid interaction'. Transactions of Famena 42 (3) :1-31. Available Online  
Dr Mert Celikin
Chakrabartty J; Harnagea C; Celikin M; Rosei F; Nechache R (2018) 'Improved photovoltaic performance from inorganic perovskite oxide thin films with mixed crystal phases'. Nature Photonics 12 (5) :271-276. Available Online  
Zhou Y; Celikin M; Camellini A; Sirigu G; Tong X; Jin L; Basu K; Tong X; Barba D; Ma D (2017) 'Ultrasmall Nanoplatelets: The Ultimate Tuning of Optoelectronic Properties'. Advanced Energy Materials 7 (17). Available Online  
Celikin M; Gauvin R; Pekguleryuz M (2018) 'Dynamic co-precipitation of α-Mn / Mg<inf>12</inf>Ce in creep resistant Mg-Sr-Mn-Ce alloys'. Materials Science and Engineering A 719 :199-205. Available Online  
Mr Michio Clark
Clark JM; Taylor K; Post A; Hoshizaki TB; Gilchrist MD (2018) 'Comparison of Ice Hockey Goaltender Helmets for Concussion Type Impacts'. Annals of Biomedical Engineering 46 (7) :986-1000. Available Online  
Clark JM; Hoshizaki TB; Gilchrist MD (2018) 'Assessing women's lacrosse head impacts using finite element modelling'. Journal of the Mechanical Behavior of Biomedical Materials 80 :20-26. Available Online  
Manita Dangol
Dangol M; Kim S; Li CG; Fakhraei Lahiji S; Jang M; Ma Y; Huh I; Jung H (2017) 'Anti-obesity effect of a novel caffeine-loaded dissolving microneedle patch in high-fat diet-induced obese C57BL/6J mice'. Journal of Controlled Release 265 :41-47. Available Online  
Fakhraei Lahiji S; Jang Y; Ma Y; Dangol M; Yang H; Jang M; Jung H (2018) 'Effects of dissolving microneedle fabrication parameters on the activity of encapsulated lysozyme'. European Journal of Pharmaceutical Sciences 117 :290-296. Available Online  
Fakhraei Lahiji S; Seo SH; Kim S; Dangol M; Shim J; Li CG; Ma Y; Lee C; Kang G; Yang H (2018) 'Transcutaneous implantation of valproic acid-encapsulated dissolving microneedles induces hair regrowth'. Biomaterials 167 :69-79. Available Online  
Dr Daithi De Faoite
Dunne CF; Cooke G; Keane S; de Faoite D; Donnelly SC; Stanton KT (2018) 'Nanostructured apatite-mullite glass-ceramics for enhanced primary human osteoblast cell response'. Materials Letters 214 :268-271. Available Online  
Dr Mattia De Rosa
Dumont O; Dickes R; De Rosa M; Douglas R; Lemort V (2018) 'Technical and economic optimization of subcritical, wet expansion and transcritical Organic Rankine Cycle (ORC) systems coupled with a biogas power plant'. Energy Conversion and Management 157 :294-306. Available Online  
Professor Denis Dowling
Mukherjee S; Martínez-González JA; Dowling DP; Gowen AA (2018) 'Predictive modelling of the water contact angle of surfaces using attenuated total reflection-Fourier transform infrared (ATR-FTIR) chemical imaging and partial least squares regression (PLSR)'. Analyst 143 (15) :3729-3740. Available Online  
Abourayana H; Dobbyn P; Dowling D (2018) 'Enhancing the mechanical performance of additive manufactured polymer components using atmospheric plasma pre-treatments'. Plasma Processes and Polymers 15 (3). Available Online  
Abourayana, H.M.; Dobbyn, P.; Dowling D.P. (2017) 'Investigation of the Performance of Barrel Atmospheric Plasma Source for the Deposition of Fluorocarbon Coating onto Silicone Polymer Particles'. Advances in Materials Science and Engineering 1 (1) :1-5. Available Online  
Ekoi EJ; Stallard C; Reid I; Dowling DP (2017) 'Tailoring oxide-layer formation on titanium substrates using microwave plasma treatments'. Surface and Coatings Technology 325 :299-307. Available Online  
O'Connor HJ; Dowling DP (2018) 'Evaluation of the influence of low pressure additive manufacturing processing conditions on printed polymer parts'. Additive Manufacturing 21 :404-412. Available Online  
Stenson C; McDonnell KA; Yin S; Aldwell B; Meyer M; Dowling DP; Lupoi R (2018) 'Cold spray deposition to prevent fouling of polymer surfaces'. Surface Engineering 34 (3) :193-204. Available Online  
Law VJ; Dowling DP (2018) 'Converting a Microwave Oven into a Plasma Reactor: A Review'. International Journal of Chemical Engineering 2018. Available Online  
O'Connor HJ; Dickson AN; Dowling DP (2018) 'Evaluation of the mechanical performance of polymer parts fabricated using a production scale multi jet fusion printing process'. Additive Manufacturing 22 :381-387. Available Online  
Bonomo M; Sheehan S; Dowling DP; Gontrani L; Dini D (2018) 'First Evidence of Electrode Reconstruction in Mesoporous NiO After Operation as Photocathode of Dye-Sensitized Solar Cells'. ChemistrySelect 3 (24) :6729-6736. Available Online  
Professor Fengzhou Fang
Zhang N; Zhang H; Stallard C; Fang F; Gilchrist MD (2018) 'Replication integrity of micro features using variotherm and vacuum assisted microinjection moulding'. CIRP Journal of Manufacturing Science and Technology . Available Online  
Fu X; Xu Z; He Z; Hartmaier A; Fang F (2018) 'Molecular dynamics simulation of silicon ion implantation into diamond and subsequent annealing'. Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms . Available Online  
Xu K; Jia Z; Fang F (2018) 'Measurement of Transmission Wavefront Aberration of Freeform Spectacle Lenses in Real Viewing Condition of Human Eye'. Guangxue Xuebao/Acta Optica Sinica 38 (2). Available Online  
Jia Z; Xu K; Fang F (2018) 'Effective wavefront aberration measurement of spectacle lenses in as-worn status'. Measurement Science and Technology 29 (4). Available Online  
Li Z; Liu X; Fang F; Zhang X; Zeng Z; Zhu L; Yan N (2018) 'Integrated manufacture of a freeform off-Axis multi-reflective imaging system without optical alignment'. Optics Express 26 (6) :7625-7637. Available Online  
Li Z; Jin G; Fang F; Gong H; Jia H (2018) 'Ultrasonically assisted single point diamond turning of optical mold of tungsten carbide'. Micromachines 9 (2). Available Online  
Fang F; Chen X; Zhang X; Li Z (2017) 'Development of Fast Tool Servo Control System Based on Maxwell Normal Force Using ADRC Algorithm'. Nami Jishu yu Jingmi Gongcheng/Nanotechnology and Precision Engineering 15 (5) :335-341. Available Online  
Zhu L; Li Z; Fang F; Huang S; Zhang X (2018) 'Review on fast tool servo machining of optical freeform surfaces'. International Journal of Advanced Manufacturing Technology 95 (43317) :2071-2092. Available Online  
Xu F; Fang F; Zhang X (2018) 'Effects of recovery and side flow on surface generation in nano-cutting of single crystal silicon'. Computational Materials Science 143 :133-142. Available Online  
Ni H; Gong H; Dong YH; Fang FZ; Wang Y (2018) 'A comparative investigation on hybrid EDM for drilling small deep holes'. International Journal of Advanced Manufacturing Technology 95 (43191) :1465-1472. Available Online  
Fang F; Shih A; Lai Y; Tao F; Nee AYC (2018) 'Editorial for the special issue on innovative design and applications (selected papers from ICFDM2016)'. International Journal of Advanced Manufacturing Technology 94 (43443) :3017-3018. Available Online  
Li Z; Fang F; Zhang X; Liu X; Gao H (2017) 'Highly efficient machining of non-circular freeform optics using fast tool servo assisted ultra-precision turning'. Optics Express 25 (21) :25243-25256. Available Online  
Wang Y; Li Z; Liu X; Fang F; Zhang X (2017) 'Freeform-objective Chernin multipass cell: Application of a freeform surface on assembly simplification'. Applied Optics 56 (30) :8541-8546. Available Online  
Wang J; Chen R; Zhang X; Fang F (2018) 'Study on machinability of silicon irradiated by swift ions'. Precision Engineering 51 :577-581. Available Online  
Zhang X; Li L; Li Z; Chan C; Zhu L; Lee W; Fang F (2018) 'Highly uniform manufacturing method for large-area microlens arrays'. International Journal of Advanced Manufacturing Technology 95 (43191) :99-108. Available Online  
Vo Q; Fang F; Zhang X; Gao H (2017) 'Surface recovery algorithm in white light interferometry based on combined white light phase shifting and fast Fourier transform algorithms'. Applied Optics 56 (29) :8174-8185. Available Online  
Liu X; Zhang X; Fang F; Zeng Z (2018) 'Performance-controllable manufacture of optical surfaces by ultra-precision machining'. International Journal of Advanced Manufacturing Technology 94 (43443) :4289-4299. Available Online  
Jia Z; Xu K; Fang F (2017) 'Measurement of spectacle lenses using wavefront aberration in real view condition'. Optics Express 25 (18) :22125-22139. Available Online  
Jiang L; Zhang X; Fang F; Liu X; Zhu L (2017) 'Wavefront aberration metrology based on transmitted fringe deflectometry'. Applied Optics 56 (26) :7396-7403. Available Online  
Xu F; Fang F; Zhang X (2017) 'Hard particle effect on surface generation in nano-cutting'. Applied Surface Science 425 :1020-1027. Available Online  
Zhang L; You Y; Fu Y; Xu Z; Fang F (2018) 'A Simplified and Cost-Effective Optical Absorber and Corresponding Photo-Thermal Effect'. Plasmonics 13 (1) :265-268. Available Online  
Wang J; Fang F; Zhang X (2017) 'Nanometric Cutting of Silicon with an Amorphous-Crystalline Layered Structure: A Molecular Dynamics Study'. Nanoscale Research Letters 12 (1). Available Online  
Zhang H; Fang F; Gilchrist MD; Zhang N (2018) 'Filling of high aspect ratio micro features of a microfluidic flow cytometer chip using micro injection moulding'. Journal of Micromechanics and Microengineering 28 (7). Available Online  
Zhang N; Zhang H; Zhang H; Fang F; Gilchrist M (2018) 'Geometric Replication Integrity of Micro Features Fabricated Using Variotherm Assisted Micro Injection Moulding'. Procedia CIRP 71 :390-395. Available Online  
Kang CW; Fang FZ (2018) 'State of the art of bioimplants manufacturing: part II'. Advances in Manufacturing 6 (2) :137-154. Available Online  
Kang CW; Fang FZ (2018) 'State of the art of bioimplants manufacturing: part I'. Advances in Manufacturing 6 (1) :20-40. Available Online  
Melentiev R; Fang F (2018) 'Recent advances and challenges of abrasive jet machining'. CIRP Journal of Manufacturing Science and Technology 22 :1-20. Available Online  
Zheng X; Li Z; Zhang X; Fang F (2018) 'Manufacturing-constrained optical design methodology for cylindrical freeform reflective imaging system'. Optics Express 26 (17) :22547-22562. Available Online  
Yuan Y; Gu C; Yan G; Fang F (2018) 'Mechanical property and modal analysis of ultra-thin mirrors'. Yi Qi Yi Biao Xue Bao/Chinese Journal of Scientific Instrument 39 (6) :64-72. Available Online  
Li X; Xing Y; Fang F; Liu P; Su Z (2018) 'Multi-parameter measurement method based on combined surface reference'. Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering 47 (7). Available Online  
Cheng Y; Fang F; Lu Y; Zhang X (2018) 'Numerical design method for conic curved Fresnel lens'. Hongwai yu Jiguang Gongcheng/Infrared and Laser Engineering 47 (7). Available Online  
Assoc Professor Donal Finn
Egan J; Finn D; Deogene Soares PH; Rocha Baumann VA; Aghamolaei R; Beagon P; Neu O; Pallonetto F; O'Donnell J (2018) 'Definition of a useful minimal-set of accurately-specified input data for Building Energy Performance Simulation'. Energy and Buildings 165 :172-183. Available Online  
McKenna P; Turner WJN; Finn DP (2018) 'Geocooling with integrated PCM thermal energy storage in a commercial building'. Energy 144 :865-876. Available Online  
Andrade-Cabrera C; Burke D; Turner WJN; Finn DP (2017) 'Ensemble Calibration of lumped parameter retrofit building models using Particle Swarm Optimization'. Energy and Buildings 155 :513-532. Available Online  
Tardioli G; Kerrigan R; Oates M; O'Donnell J; Finn DP (2018) 'Identification of representative buildings and building groups in urban datasets using a novel pre-processing, classification, clustering and predictive modelling approach'. Building and Environment 140 :90-106. Available Online  
Dr Pezhman Ghadimi
Ghadimi P; Ghassemi Toosi F; Heavey C (2018) 'A multi-agent systems approach for sustainable supplier selection and order allocation in a partnership supply chain'. European Journal of Operational Research 269 (1) :286-301. Available Online  
Azadnia AH; Ghadimi P (2018) 'An Integrated Approach of Fuzzy Quality Function Deployment and Fuzzy Multi-Objective Programming To sustainable Supplier Selection and Order Allocation'. Journal of Optimization in Industrial Engineering 11 (1) :1-22. Available Online  
Professor Michael Gilchrist
Zhang N; Zhang H; Stallard C; Fang F; Gilchrist MD (2018) 'Replication integrity of micro features using variotherm and vacuum assisted microinjection moulding'. CIRP Journal of Manufacturing Science and Technology . Available Online  
Ling C; Ivens J; Cardiff P; Gilchrist MD (2018) 'Deformation response of EPS foam under combined compression-shear loading. Part I: Experimental design and quasi-static tests'. International Journal of Mechanical Sciences 144 :480-489. Available Online  
Clark JM; Taylor K; Post A; Hoshizaki TB; Gilchrist MD (2018) 'Comparison of Ice Hockey Goaltender Helmets for Concussion Type Impacts'. Annals of Biomedical Engineering 46 (7) :986-1000. Available Online  
Clark JM; Hoshizaki TB; Gilchrist MD (2018) 'Assessing women's lacrosse head impacts using finite element modelling'. Journal of the Mechanical Behavior of Biomedical Materials 80 :20-26. Available Online  
Zhang H; Fang F; Gilchrist MD; Zhang N (2018) 'Filling of high aspect ratio micro features of a microfluidic flow cytometer chip using micro injection moulding'. Journal of Micromechanics and Microengineering 28 (7). Available Online  
Zhang N; Zhang H; Zhang H; Fang F; Gilchrist M (2018) 'Geometric Replication Integrity of Micro Features Fabricated Using Variotherm Assisted Micro Injection Moulding'. Procedia CIRP 71 :390-395. Available Online  
MacManus DB; Gilchrist MD; Murphy JG (2017) 'An empirical measure of nonlinear strain for soft tissue indentation'. Royal Society Open Science 4 (11). Available Online  
MacManus DB; Pierrat B; Murphy JG; Gilchrist MD (2017) 'Region and species dependent mechanical properties of adolescent and young adult brain tissue'. Scientific Reports 7 (1). Available Online  
Pierrat B; MacManus DB; Murphy JG; Gilchrist MD (2018) 'Indentation of heterogeneous soft tissue: Local constitutive parameter mapping using an inverse method and an automated rig'. Journal of the Mechanical Behavior of Biomedical Materials 78 :515-528. Available Online  
Gilchrist MD; Murphy JG; Pierrat B; Saccomandi G (2017) 'Slight asymmetry in the winding angles of reinforcing collagen can cause large shear stresses in arteries and even induce buckling'. Meccanica 52 (14) :3417-3429. Available Online  
Oeur RA; Gilchrist MD; Hoshizaki TB (2018) 'Interaction of impact parameters for simulated falls in sport using three different sized Hybrid III headforms'. International Journal of Crashworthiness  :1-10. Available Online  
Clark JM; Hoshizaki TB; Gilchrist MD (2017) 'Protective capacity of an ice hockey goaltender helmet for three events associated with concussion'. Computer Methods in Biomechanics and Biomedical Engineering 20 (12) :1299-1311. Available Online  
Post A; Kendall M; Cournoyer J; Taylor K; Hoshizaki TB; Gilchrist MD; Brien S; Cusimano MD; Marshall S (2018) 'Falls resulting in mild traumatic brain injury and focal traumatic brain injury: a biomechanical analysis'. International Journal of Crashworthiness 23 (3) :278-289. Available Online  
Post A; Blaine Hoshizaki T; Gilchrist MD; Koncan D; Dawson L; Chen W; Ledoux AA; Zemek R; McGahern C; Sangha G (2018) 'Response'. Journal of Neurosurgery: Pediatrics 21 (1) :95-96. Available Online  
MacManus DB; Gilchrist MD; Murphy JG (2018) 'An empirical measure of nonlinear strain for soft tissue indentation (vol 4, 170894, 2017)'. ROYAL SOCIETY OPEN SCIENCE 5 (6). Available Online  
Clark JM; Hoshizaki TB; Gilchrist MD (2018) 'Event-specific impact test protocol for ice hockey goaltender masks'. Sports Biomechanics . Available Online  
Professor Lizbeth Goodman
Politis. Y., Robb, N., Yakkundi, A., Dillenburger, K., Herbertson, N., Charlesworth, B., & Goodman L. (2017) 'People with Disabilities Leading the Design of Serious Games and Virtual Worlds.'. JMIR serious games 4 (2) :63-73.  
Dr Vincent Hargaden
Coughlan P; Hargaden V; Coghlan D; Idris A; Åhlström P (2018) 'The role of OM EDEN in building the EurOMA community'. International Journal of Operations and Production Management 38 (8) :1664-1682. Available Online  
Bochenek T; Abilova V; Alkan A; Asanin B; Beriain IDM; Besovic Z; Bonanno PV; Bucsics A; Davidescu M; De Weerdt E (2018) 'Systemic measures and legislative and organizational frameworks aimed at preventing or mitigating drug shortages in 28 European and Western Asian Countries'. Frontiers in Pharmacology 8 (JAN). Available Online  
Papakostas N; O'Connor Moneley J; Hargaden V (2018) 'Integrated simulation-based facility layout and complex production line design under uncertainty'. CIRP Annals 67 (1) :451-454. Available Online  
Dr Donal Holland
Severini G; Holland D; Drumgoole A; Delahunt E; Ditroilo M (2018) 'Kinematic and electromyographic analysis of the Askling L-Protocol for hamstring training'. Scandinavian Journal of Medicine and Science in Sports . Available Online  
Holland DP; Berndt S; Herman M; Walsh CJ (2018) 'Growing the Soft Robotics Community Through Knowledge-Sharing Initiatives'. Soft Robotics 5 (2) :119-121. Available Online  
Holland DP; Walsh CJ; Bennett GJ (2018) 'A qualitative investigation of design knowledge reuse in project-based mechanical design courses'. European Journal of Engineering Education  :1-16. Available Online  
Moyne MM; Herman M; Gajos K; Walsh C; Holland D (2018) 'The development and evaluation of DEFT, a web-based tool for engineering design education'. IEEE Transactions on Learning Technologies . Available Online  
Byrne O; Coulter F; Glynn M; Jones JFX; Annaidh AN; O'Cearbhaill ED; Holland DP (2018) 'Additive Manufacture of Composite Soft Pneumatic Actuators.'. Soft robotics . Available Online  
Professor Alojz Ivankovic
Quan D; Cardiff P; Murphy N; Ivankovic A (2018) 'Damage behaviour of nano-modified epoxy adhesives subject to high stress constraint'. Journal of Adhesion 94 (5) :387-405. Available Online  
Quan D; Murphy N; Cardiff P; Ivankovic A (2018) 'The intrinsic fracture property of a rubber-modified epoxy adhesive: Geometrical transferability'. Engineering Fracture Mechanics . Available Online  
Tuković Ž; Jasak H; Karač A; Cardiff P; Ivanković A (2018) 'Openfoam finite volume solver for fluid-solid interaction'. Transactions of Famena 42 (3) :1-31. Available Online  
Quan D; Urdániz JL; Ivanković A (2018) 'Enhancing mode-I and mode-II fracture toughness of epoxy and carbon fibre reinforced epoxy composites using multi-walled carbon nanotubes'. Materials and Design 143 :81-92. Available Online  
Quan D; Murphy N; Ivankovic A (2017) 'Fracture behaviour of epoxy adhesive joints modified with core-shell rubber nanoparticles'. Engineering Fracture Mechanics 182 :566-576. Available Online  
Quan D; Murphy N; Ivankovic A (2017) 'Fracture behaviour of a rubber nano-modified structural epoxy adhesive: Bond gap effects and fracture damage zone'. International Journal of Adhesion and Adhesives 77 :138-150. Available Online  
Parsa H; Karac A; Ivankovic A (2017) 'A novel surrogate lung material for impact studies: Development and testing procedures'. Journal of Biomechanics 63 :74-81. Available Online  
Quan D; Carolan D; Rouge C; Murphy N; Ivankovic A (2018) 'Mechanical and fracture properties of epoxy adhesives modified with graphene nanoplatelets and rubber particles'. International Journal of Adhesion and Adhesives 81 :21-29. Available Online  
Quan D; Urdániz JL; Rouge C; Ivanković A (2018) 'The enhancement of adhesively-bonded aerospace-grade composite joints using steel fibres'. Composite Structures 198 :11-18. Available Online  
Ivankovic A; Tukovic Z; Karac A; Cardiff P; Jasak H (2018) 'Parallel unstructured finite-volume method for fluid-structure interaction'. Computational Transactions of FAMENA . Available Online  
Dr David MacManus
MacManus DB; Gilchrist MD; Murphy JG (2017) 'An empirical measure of nonlinear strain for soft tissue indentation'. Royal Society Open Science 4 (11). Available Online  
MacManus DB; Pierrat B; Murphy JG; Gilchrist MD (2017) 'Region and species dependent mechanical properties of adolescent and young adult brain tissue'. Scientific Reports 7 (1). Available Online  
Pierrat B; MacManus DB; Murphy JG; Gilchrist MD (2018) 'Indentation of heterogeneous soft tissue: Local constitutive parameter mapping using an inverse method and an automated rig'. Journal of the Mechanical Behavior of Biomedical Materials 78 :515-528. Available Online  
MacManus DB; Gilchrist MD; Murphy JG (2018) 'An empirical measure of nonlinear strain for soft tissue indentation (vol 4, 170894, 2017)'. ROYAL SOCIETY OPEN SCIENCE 5 (6). Available Online  
Dr Neal Murphy
Quan D; Cardiff P; Murphy N; Ivankovic A (2018) 'Damage behaviour of nano-modified epoxy adhesives subject to high stress constraint'. Journal of Adhesion 94 (5) :387-405. Available Online  
Quan D; Murphy N; Cardiff P; Ivankovic A (2018) 'The intrinsic fracture property of a rubber-modified epoxy adhesive: Geometrical transferability'. Engineering Fracture Mechanics . Available Online  
Quan D; Murphy N; Ivankovic A (2017) 'Fracture behaviour of epoxy adhesive joints modified with core-shell rubber nanoparticles'. Engineering Fracture Mechanics 182 :566-576. Available Online  
Quan D; Murphy N; Ivankovic A (2017) 'Fracture behaviour of a rubber nano-modified structural epoxy adhesive: Bond gap effects and fracture damage zone'. International Journal of Adhesion and Adhesives 77 :138-150. Available Online  
Quan D; Carolan D; Rouge C; Murphy N; Ivankovic A (2018) 'Mechanical and fracture properties of epoxy adhesives modified with graphene nanoplatelets and rubber particles'. International Journal of Adhesion and Adhesives 81 :21-29. Available Online  
Quan, D., Murphy, N., Ivankovic, A. (2017) 'Fracture behaviour of a rubber nano-modified structural epoxy adhesive: Bond gap effects and fracture damage zone.'. International Journal of Adhesion and Adhesives 77 :138-150. Available Online  
Dr Aisling Ní Annaidh
Trotta A; Zouzias D; De Bruyne G; Ní Annaidh A (2018) 'The Importance of the Scalp in Head Impact Kinematics'. Annals of Biomedical Engineering 46 (6) :831-840. Available Online  
Trotta A; Ní Annaidh A; Burek RO; Pelgrims B; Ivens J (2018) 'Evaluation of the head-helmet sliding properties in an impact test'. Journal of Biomechanics 75 :28-34. Available Online  
Dr Michael O'Byrne
O'Byrne M; Pakrashi V; Schoefs F; Ghosh B (2018) 'A Stereo-Matching Technique for Recovering 3D Information from Underwater Inspection Imagery'. Computer-Aided Civil and Infrastructure Engineering 33 (3) :193-208. Available Online  
Dr Eoin O'Cearbhaill
Byrne O; Coulter F; Glynn M; Jones JFX; Annaidh AN; O'Cearbhaill ED; Holland DP (2018) 'Additive Manufacture of Composite Soft Pneumatic Actuators.'. Soft robotics . Available Online  
Kim B; Seong KY; You I; Selvaraj V; Yim SG; O'Cearbhaill ED; Jeong U; Yang SY (2018) 'Touch-actuated transdermal delivery patch for quantitative skin permeation control'. Sensors and Actuators, B: Chemical 256 :18-26. Available Online  
Seong KY; Seo MS; Hwang DY; O'Cearbhaill ED; Sreenan S; Karp JM; Yang SY (2017) 'A self-adherent, bullet-shaped microneedle patch for controlled transdermal delivery of insulin'. Journal of Controlled Release 265 :48-56. Available Online  
Feins EN; Lee Y; O'Cearbhaill ED; Vasilyev NV; Shimada S; Friehs I; Perrin D; Hammer PE; Yamauchi H; Marx G (2017) 'A growth-accommodating implant for paediatric applications'. Nature Biomedical Engineering 1 (10) :818-825. Available Online  
Assoc Professor William Oconnor
Habibi H; O'Connor W (2018) 'Wave-based planar motion and vibration control of under-actuated mass-spring arrays'. JOURNAL OF LOW FREQUENCY NOISE VIBRATION AND ACTIVE CONTROL 37 (2) :269-278. Available Online  
Dr James O'Donnell
Egan J; Finn D; Deogene Soares PH; Rocha Baumann VA; Aghamolaei R; Beagon P; Neu O; Pallonetto F; O'Donnell J (2018) 'Definition of a useful minimal-set of accurately-specified input data for Building Energy Performance Simulation'. Energy and Buildings 165 :172-183. Available Online  
Beagon P; Boland F; O'Donnell J (2018) 'Quantitative evaluation of deep retrofitted social housing using metered gas data'. Energy and Buildings 170 :242-256. Available Online  
Tardioli G; Kerrigan R; Oates M; O'Donnell J; Finn DP (2018) 'Identification of representative buildings and building groups in urban datasets using a novel pre-processing, classification, clustering and predictive modelling approach'. Building and Environment 140 :90-106. Available Online  
Pinheiro S; Wimmer R; O'Donnell J; Muhic S; Bazjanac V; Maile T; Frisch J; van Treeck C (2018) 'MVD based information exchange between BIM and building energy performance simulation'. Automation in Construction 90 :91-103. Available Online  
Cao J; Metzmacher H; O'Donnell J; Frisch J; Bazjanac V; Kobbelt L; van Treeck C (2017) 'Facade geometry generation from low-resolution aerial photographs for building energy modeling'. Building and Environment 123 :601-624. Available Online  
Li Y; O'Donnell J; García-Castro R; Vega-Sánchez S (2017) 'Identifying stakeholders and key performance indicators for district and building energy performance analysis'. Energy and Buildings 155 :1-15. Available Online  
Horrigan M; Turner WJN; O'Donnell J (2018) 'A statistically-based fault detection approach for environmental and energy management in buildings'. Energy and Buildings 158 :1499-1509. Available Online  
Aghamolaei R; Shamsi MH; Tahsildoost M; O'Donnell J (2018) 'Review of district-scale energy performance analysis: Outlooks towards holistic urban frameworks'. Sustainable Cities and Society 41 :252-264. Available Online  
Dr Vikram Pakrashi
Vathakkattil Joseph G, Hao G and Pakrashi V. (2018). Extreme Value Estimates using Vibration Energy Harvesting. Journal of Sound and Vibration 437, 29-39.  
O’Byrne M, Pakrashi V, Schoefs F and Ghosh B. (2018). Semantic Segmentation of Underwater Imagery Using Deep Networks Trained on Synthetic Imagery. Journal of Marine Science and Engineering, 6, 93:1-15  
Cahill P; Hazra B; Karoumi R; Mathewson A; Pakrashi V (2018) 'Data of piezoelectric vibration energy harvesting of a bridge undergoing vibration testing and train passage'. Data in Brief 17 :261-266. Available Online  
Cahill P; Hazra B; Karoumi R; Mathewson A; Pakrashi V (2018) 'Vibration energy harvesting based monitoring of an operational bridge undergoing forced vibration and train passage'. Mechanical Systems and Signal Processing 106 :265-283. Available Online  
Buckley T; Watson P; Cahill P; Jaksic V; Pakrashi V (2018) 'Mitigating the structural vibrations of wind turbines using tuned liquid column damper considering soil-structure interaction'. Renewable Energy 120 :322-341. Available Online  
Cahill P; Mathewson A; Pakrashi V (2018) 'Experimental Validation of Piezoelectric Energy-Harvesting Device for Built Infrastructure Applications'. Journal of Bridge Engineering 23 (8). Available Online  
Cahill P; Pakrashi V; Sun P; Mathewson A; Nagarajaiah S (2018) 'Energy harvesting techniques for health monitoring and indicators for control of a damaged pipe structure'. Smart Structures and Systems 21 (3) :287-303. Available Online  
O'Byrne M; Pakrashi V; Schoefs F; Ghosh B (2018) 'A Stereo-Matching Technique for Recovering 3D Information from Underwater Inspection Imagery'. Computer-Aided Civil and Infrastructure Engineering 33 (3) :193-208. Available Online  
Hanley C; Frangopol DM; Kelliher D; Pakrashi V (2018) 'Reliability index and parameter importance for bridge traffic loading definition changes'. Proceedings of the Institution of Civil Engineers: Bridge Engineering 171 (1) :13-24. Available Online  
Quirk L; Matos J; Murphy J; Pakrashi V (2018) 'Visual inspection and bridge management'. Structure and Infrastructure Engineering 14 (3) :320-332. Available Online  
Bhowmik B; Krishnan M; Hazra B; Pakrashi V (2018) 'Real-time unified single- and multi-channel structural damage detection using recursive singular spectrum analysis'. Structural Health Monitoring . Available Online  
Pakrashi V; Fitzgerald P; O’Leary M; Jaksic V; Ryan K; Basu B (2018) 'Assessment of structural nonlinearities employing extremes of dynamic responses'. JVC/Journal of Vibration and Control 24 (1) :137-152. Available Online  
Krishnan M; Bhowmik B; Hazra B; Pakrashi V (2018) 'Real time damage detection using recursive principal components and time varying auto-regressive modeling'. Mechanical Systems and Signal Processing 101 :549-574. Available Online  
O’Byrne M; Schoefs F; Pakrashi V; Ghosh B (2018) 'An underwater lighting and turbidity image repository for analysing the performance of image-based non-destructive techniques'. Structure and Infrastructure Engineering 14 (1) :104-123. Available Online  
Doorley R; Pakrashi V; Ghosh B (2017) 'Health impacts of cycling in Dublin on individual cyclists and on the local population'. Journal of Transport and Health 6 :420-432. Available Online  
Pakrashi V; Marano G; Cahill P; Ali SF; Magno M (2018) 'Vibration Energy Harvesting for Monitoring Dynamical Systems'. Shock and Vibration 2018. Available Online  
Rahman ME; Ong PJ; Nabinejad O; Islam S; Khandoker NAN; Pakrashi V; Shorowordi KM (2018) 'Utilization of Blended Waste Materials in Bricks'. Technologies . Available Online  
Assoc Professor Nikolaos Papakostas
Papakostas N; O'Connor Moneley J; Hargaden V (2018) 'Integrated simulation-based facility layout and complex production line design under uncertainty'. CIRP Annals 67 (1) :451-454. Available Online  
Dr Yurgos Politis
Politis. Y., Robb, N., Yakkundi, A., Dillenburger, K., Herbertson, N., Charlesworth, B., & Goodman L. (2017) 'People with Disabilities Leading the Design of Serious Games and Virtual Worlds.'. JMIR serious games 4 (2) :63-73.  
Clarke M; Drennan J; Hyde A; Politis Y (2018) 'The impact of austerity on Irish higher education faculty'. Higher Education 75 (6) :1047-1060. Available Online  
J Drennan, Clarke M, Hyde A, Politis Y (2018) 'The impact of austerity on Irish higher education faculty.'. Higher Education . Available Online  
Dr Dong Quan
Quan D; Cardiff P; Murphy N; Ivankovic A (2018) 'Damage behaviour of nano-modified epoxy adhesives subject to high stress constraint'. Journal of Adhesion 94 (5) :387-405. Available Online  
Quan D; Murphy N; Cardiff P; Ivankovic A (2018) 'The intrinsic fracture property of a rubber-modified epoxy adhesive: Geometrical transferability'. Engineering Fracture Mechanics . Available Online  
Quan D; Urdániz JL; Ivanković A (2018) 'Enhancing mode-I and mode-II fracture toughness of epoxy and carbon fibre reinforced epoxy composites using multi-walled carbon nanotubes'. Materials and Design 143 :81-92. Available Online  
Quan D; Murphy N; Ivankovic A (2017) 'Fracture behaviour of epoxy adhesive joints modified with core-shell rubber nanoparticles'. Engineering Fracture Mechanics 182 :566-576. Available Online  
Quan D; Murphy N; Ivankovic A (2017) 'Fracture behaviour of a rubber nano-modified structural epoxy adhesive: Bond gap effects and fracture damage zone'. International Journal of Adhesion and Adhesives 77 :138-150. Available Online  
Quan D; Carolan D; Rouge C; Murphy N; Ivankovic A (2018) 'Mechanical and fracture properties of epoxy adhesives modified with graphene nanoplatelets and rubber particles'. International Journal of Adhesion and Adhesives 81 :21-29. Available Online  
Quan D; Urdániz JL; Rouge C; Ivanković A (2018) 'The enhancement of adhesively-bonded aerospace-grade composite joints using steel fibres'. Composite Structures 198 :11-18. Available Online  
Dr Clemence Rouge
Quan D; Carolan D; Rouge C; Murphy N; Ivankovic A (2018) 'Mechanical and fracture properties of epoxy adhesives modified with graphene nanoplatelets and rubber particles'. International Journal of Adhesion and Adhesives 81 :21-29. Available Online  
Quan D; Urdániz JL; Rouge C; Ivanković A (2018) 'The enhancement of adhesively-bonded aerospace-grade composite joints using steel fibres'. Composite Structures 198 :11-18. Available Online  
Dr Mohammad Saffari
Saffari M; de Gracia A; Fernández C; Belusko M; Boer D; Cabeza LF (2018) 'Optimized demand side management (DSM) of peak electricity demand by coupling low temperature thermal energy storage (TES) and solar PV'. Applied Energy 211 :604-616. Available Online  
Saffari M; Piselli C; de Gracia A; Pisello AL; Cotana F; Cabeza LF (2018) 'Thermal stress reduction in cool roof membranes using phase change materials (PCM)'. Energy and Buildings 158 :1097-1105. Available Online  
Piselli C; Saffari M; de Gracia A; Pisello AL; Cotana F; Cabeza LF (2017) 'Optimization of roof solar reflectance under different climate conditions, occupancy, building configuration and energy systems'. Energy and Buildings 151 :81-97. Available Online  
Professor Kenneth Stanton
Ruddy M; FitzPatrick DP; Stanton KT (2018) 'Preparation of morselised bone for impaction grafting using a blender method'. Journal of the Mechanical Behavior of Biomedical Materials 78 :91-95. Available Online  
Ruddy M; FitzPatrick DP; Stanton KT (2018) 'The use of hardened bone cement as an impaction grafting extender for revision hip arthroplasty'. Journal of the Mechanical Behavior of Biomedical Materials 78 :82-90. Available Online  
Dunne CF; Cooke G; Keane S; de Faoite D; Donnelly SC; Stanton KT (2018) 'Nanostructured apatite-mullite glass-ceramics for enhanced primary human osteoblast cell response'. Materials Letters 214 :268-271. Available Online  
Dunne CF; Roche K; Janssen A; Zhong X; Burke MG; Twomey B; Stanton KT (2017) 'Ultrafine grain formation and coating mechanism arising from a blast coating process: A transmission electron microscopy analysis'. Surface and Interface Analysis 49 (12) :1271-1278. Available Online  
Flanagan J; Schütze P; Dunne C; Twomey B; Stanton KT (2018) 'Use of a blast coating process to promote adhesion between aluminium surfaces for the automotive industry'. Journal of Adhesion  :1-22. Available Online  
Assoc Professor David Timoney
Sweeney S; Ordonez-Hurtado R; Pilla F; Russo G; Timoney D; Shorten R (2018) 'A Context-Aware E-Bike System to Reduce Pollution Inhalation While Cycling'. IEEE Transactions on Intelligent Transportation Systems . Available Online  
Ms Antonia Trotta
Trotta A; Zouzias D; De Bruyne G; Ní Annaidh A (2018) 'The Importance of the Scalp in Head Impact Kinematics'. Annals of Biomedical Engineering 46 (6) :831-840. Available Online  
Trotta A; Ní Annaidh A; Burek RO; Pelgrims B; Ivens J (2018) 'Evaluation of the head-helmet sliding properties in an impact test'. Journal of Biomechanics 75 :28-34. Available Online  
Mr Barry Twomey
Dunne CF; Roche K; Janssen A; Zhong X; Burke MG; Twomey B; Stanton KT (2017) 'Ultrafine grain formation and coating mechanism arising from a blast coating process: A transmission electron microscopy analysis'. Surface and Interface Analysis 49 (12) :1271-1278. Available Online  
Flanagan J; Schütze P; Dunne C; Twomey B; Stanton KT (2018) 'Use of a blast coating process to promote adhesion between aluminium surfaces for the automotive industry'. Journal of Adhesion  :1-22. Available Online  
Dr Nan Zhang
Zhang N; Zhang H; Stallard C; Fang F; Gilchrist MD (2018) 'Replication integrity of micro features using variotherm and vacuum assisted microinjection moulding'. CIRP Journal of Manufacturing Science and Technology . Available Online  
Zhang H; Fang F; Gilchrist MD; Zhang N (2018) 'Filling of high aspect ratio micro features of a microfluidic flow cytometer chip using micro injection moulding'. Journal of Micromechanics and Microengineering 28 (7). Available Online  
Zhang N; Zhang H; Zhang H; Fang F; Gilchrist M (2018) 'Geometric Replication Integrity of Micro Features Fabricated Using Variotherm Assisted Micro Injection Moulding'. Procedia CIRP 71 :390-395. Available Online  

Back to Top

Conference Publications

Dr Eamonn Ahearne
Scanlon, B. Ahearne, E. (2017) Impact of Cloud Manufacturing on New Product Development in the Irish Precision Engineering Sector  In: Proceedings of the 34th International Manufacturing Conference, 2017, Sligo Institute of Technology  
Professor David Browne  
Ivankovic, A., Dowling, D.P., Browne, D.J. (2018) “Microstructural modeling of the solidification of alloys in additive manufacture”, In: TMS Annual Meeting & Exhibition, Phoenix, AZ, USA, 11–15 March 2018.  
Ștefanov, T., Maraka, H.V.R., Browne, D.J. (2018) Surface properties of thin film metallic glasses produced by physical vapor deposition”, In: TMS Annual Meeting & Exhibition, Phoenix, AZ, USA, 11–15 March 2018.  
Browne, D.J., (2017) “Bioresorbable magnesium alloys for orthopaedic trauma surgery”, In: MedTec Ireland Conference, Galway, 4-5 October 2017.  
Dr Paul Cahill
Bekic D; Kerin I; Cahill P; Michalis P; Lapthorne J; Solman H; Gilja G; Potocki K; Pakrashi V; McKeogh E (2018) BRIDGE SMS - Innovative Solution for Management of Bridges Over Water  In: CETRA 2018, 5th International Conference on Road and Rail Infrastrcuture, Zadar, Croatia  
Cahill P; Mathewson A; Pakrashi V (2018) Laboratory based experimental investigation of patch based piezoelectric energy harvesters for civil infrastructure. Civil Engineering Research Ireland  In: Civil Engineering Research Ireland. 2018 and Irish Transportation Research Network 2018 (CERI-ITRN2018), Dublin, Ireland.  
Dr Mert Celikin
Celikin M; Pekguleryuz M (2018) Creep resistant Mg–Mn based alloys for automotive powertrain applications  In: Minerals, Metals and Materials Series Available Online  
Professor Denis Dowling
Keaveney SG; Dowling DP (2018) Application of additive manufacturing in design &amp; manufacturing engineering education  In: 2018 2nd International Symposium on Small-Scale Intelligent Manufacturing Systems, SIMS 2018 Available Online  
F. R. Kaschel, S. Keaveney, M. Celikin and D. P. Dowling (2018) Effect of laser energy density on the microstructure of additive manufactured TI-6AL-4V parts In: 35th International Manufacturing Conference,  DIT, Dublin, Ireland  
Professor Fengzhou Fang
Jiang L; Zhang X; Fang F (2018) Nonlinear phase error compensation for fringe deflectometry measuring system  In: International Journal of Nanomanufacturing Available Online  
Pang K; Song L; Fang FZ (2018) Large field of view curved compound eye imaging system using optical freeform surface  In: Guangdianzi Jiguang/Journal of Optoelectronics Laser Available Online  
Gao H; Zhang X; Fang F (2018) Axicon profile metrology using contact stylus method  In: International Journal of Nanomanufacturing Available Online  
Fang F (2018) Preface  In: Procedia CIRP Available Online  
Zhang Y; Fang F; Huang W; Wang C; Fan W (2018) Polishing technique for potassium dihydrogen phosphate crystal based on magnetorheological finishing  In: Procedia CIRP Available Online  
Yan G; You K; Fang F (2018) Ultraprecision grinding of small-aperture concave aspheric mould insert with tilt axis method  In: Procedia CIRP Available Online  
Dr Pezhman Ghadimi  
P. Ghadimi, C. Wang, M. K. Lim (2018) Sustainable coal consumption and production environmental indicator using life cycle analysis based fuzzy inference model: a Chinese supply chain perspective, In: 2018 International Conference on Resource Sustainability (icRS 2018), June 27-29, 2018, Beijing, China.  
Professor Michael Gilchrist
Gilchrist M; Adanty K; Clark M; Post A; Hoshizaki B (2018) A comparison between two oblique impact test protocols for cycling helmets  In: World Congress of Biomechanics, Dublin, Ireland  
Gilchrist M; Connor T; Stewart M; Burek R (2018) Influence of headform mass and inertia on the response to oblique impacts  In: World Congress of Biomechanics, Dublin, Ireland  
Gilchrist M; Karton C; Hoshizaki B (2018) Position specific head trauma profiles in professional American football using impact magnitude, frequency and interval  In: American Academy of Neurology Conference on Sports Concussion, Indiana, USA  
Gilchrist M; Koncan D; Hoshizaki B (2018) Head impacts in youth ice hockey: Testing protocol relating to real-world events  In: World Congress of Biomechanics, Dublin, Ireland  
Gilchrist M; MacManus D; Murphy J (2018) Mechanical characterisation of brain tissue at 1, 10, and 100/s using a custom-built micro-indentation apparatus  In: World Congress of Biomechanics, Dublin, Ireland  
Gilchrist M; Meehan A; Post A; Karton C; Hoshizaki TB (2018) Effectiveness of biomechanical metrics to predict mTBI risk for sport injury reconstructions  In: World Congress of Biomechanics, Dublin, Ireland  
Gilchrist M; Post A; Hoshizaki B; Cusimano M (2018) Linear and rotational acceleration magnitude and duration effects on strain in the corpus callosum: Implications for helmet design and innovation  In: World Congress of Biomechanics, Dublin, Ireland  
Gilchrist M; Taylor K; Post A; Hoshizaki B (2018) The effect of a novel impact management strategy on maximum principal strain for reconstructions of American football concussive events  In: World Congress of Biomechanics, Dublin, Ireland  
Gilchrist M; Zhang H; Fang F; Zhang N (2018) Experimental and numerical study of the filling of a micro feature based on a microfluidic flow cytometer chip using micro injection moulding  In: NanoMan 2018, London, UK  
Gilchrist M; Zhang N; Zhang H; Fang F (2018) Geometric replication integrity of micro features manufactured using variotherm assisted micro injection moulding  In: CIRP 4th Conference on Surface Integrity, Tianjin, China  
Mao H; Lu L; Bian K; Clausen F; Colgan N; Gilchrist M (2018) Biomechanical analysis of fluid percussion model of brain injury  In: Journal of Biomechanics Available Online  
Clark, J.M., Connor, T.A., Williams, C. and Gilchrist, M.D. (2017) Damage to real world equestrian helmets sustained from impact against different surfaces  In: IRCOBI Conference on the Biomechanics of Impact  
Koncan, D.A., Zemek, R., Gilchrist, M.D. and Hoshizaki, T.B. (2017) Helmet construction influences brain strain patterns for events causing concussion in youth ice hockey  In: IRCOBI Conference on the Biomechanics of Impact  
Gilchrist M; Clark M; Connor T (2018) Current R&D in helmet design and testing: Dealing with rotational impact  In: National Equine Forum  
Gilchrist M; Karton C; Hoshizaki B (2018) Profiling position specific head trauma in professional American football based on impact magnitude and frequency  In: World Congress of Biomechanics  
Gilchrist M; Clark M; Post A; Hoshizaki B (2018) The kinematic response characteristics of falls to turf in equestrian sports  In: World Congress of Biomechanics  
Gilchrist M; Ling C; Ivens J; Cardiff P (2018) Experimental and FEA numerical investigation of EPS foam under combined compression-shear loading  In: World Congress of Biomechanics  
Professor Lizbeth Goodman
Goodman L (2018) Keynote: SMARTmedia for digital literacy for ALL  In: Media Meets Literacy, Warsaw, Poland  
Politis Y; Leahy M; Sung C; Goodman L (2018) Let Us Converse Virtually! Conversation Skills Training through Virtual Reality  In: INSAR, Rotterdam, Netherlands  
Politis Y; Leahy M; Sung C; Goodman L; Olivia L; Olivia T; Clemente I; Lim Z (2018) Conversation skill training in Virtual Reality: a study with people with communication deficit  In: DISES, Cape Town, South Africa  
Çubukçu Ç; Goodman L; Wang B; Mangina E (2017) Gamification for teaching Java  In: ACM International Conference Proceeding Series Available Online  
Çubukçu Ç; Wang B; Goodman L; Mangina E (2017) Gamification for Teaching Java  In: EAI International Conference on Simulation Tools and Techniques Available Online  
Gleeson F; Goodman L; Hargaden V; Coughlan P (2018) Improving worker productivity in advanced manufacturing environments  In: 2017 International Conference on Engineering, Technology and Innovation: Engineering, Technology and Innovation Management Beyond 2020: New Challenges, New Approaches, ICE/ITMC 2017 - Proceedings Available Online  
Zhang B; Robb N; Goodman L (2017) Emerging educational technologies for cross-cultural collaboration: Current perspectives and future directions  In: ACM International Conference Proceeding Series Available Online  
Cohen A; Goodman L; Keaveney S; Keogh C; Dillenburger K (2018) Sustaining a caring relationship at a distance: Can haptics and 3D technologies overcome the deficits in 2D direct synchronous video based communication?  In: Proceedings of the 2017 23rd International Conference on Virtual Systems and Multimedia, VSMM 2017 Available Online  
Yakkundi A; Dillenburger K; Goodman L (2018) An inclusive reading programme for individuals with autism and intellectual disability using multi-media: Application of behaviour analysis and Headsprout early reading programme  In: Proceedings of the 2017 23rd International Conference on Virtual Systems and Multimedia, VSMM 2017 Available Online  
Goodman, L, Morie, J, Addison, A with Keaveney, S (2017) Through the Looking Glass: Back to the Future of VSMM  In: VSMM2017: IEEE Conference Proceedings  
Goodman L; Schaler R; Schaler P (2018) Life and living: Co-designing real and virtual spaces for survivors of severe Acquired Brain Injury (sABI)  In: Proceedings of the 2017 23rd International Conference on Virtual Systems and Multimedia, VSMM 2017 Available Online  
Dr Vincent Hargaden
Gleeson F; Goodman L; Hargaden V; Coughlan P (2018) Improving worker productivity in advanced manufacturing environments  In: 2017 International Conference on Engineering, Technology and Innovation: Engineering, Technology and Innovation Management Beyond 2020: New Challenges, New Approaches, ICE/ITMC 2017 - Proceedings Available Online  
Holligan C; Hargaden V; Papakostas N (2018) Product lifecycle management and digital manufacturing technologies in the era of cloud computing  In: 2017 International Conference on Engineering, Technology and Innovation: Engineering, Technology and Innovation Management Beyond 2020: New Challenges, New Approaches, ICE/ITMC 2017 - Proceedings Available Online  
Hargaden V; Papakostas N; Toomey J (2018) An application of game based learning in an electronics industry graduate training program  In: 2017 International Conference on Engineering, Technology and Innovation: Engineering, Technology and Innovation Management Beyond 2020: New Challenges, New Approaches, ICE/ITMC 2017 - Proceedings Available Online  
Dr Donal Holland
Glowatz M; Mangina E; Holland D (2017) Virtual, augmented and mixed reality technology based simulations in higher education - Opportunities for alternative assessment strategies  In: ACM International Conference Proceeding Series Available Online  
Moyne MM; Herman M; Walsh C; Holland DP (2018) IUSE: A web-based tool for engineering design pedagogy research  In: ASEE Annual Conference and Exposition, Conference Proceedings  
Moyne MM; Herman M; Walsh C; Holland DP (2018) An evaluation of an engineering design class using mixed methods techniques  In: ASEE Annual Conference and Exposition, Conference Proceedings  
Professor Alojz Ivankovic
Ivankovic A; Cardiff P; Murphy N; Quan D; Tukovic Z (2018) Intrinsic fracture properties of rubber modified epoxy adhesives  In: the 41st Annual Meeting of the Adhesion Society & 6th World Congress on Adhesion and Related Phenomena  
Ivankovic A; Clancy M; Cardiff P; De Jaeger P (2018) Implementation of Advanced Plasticity Models in OpenFOAM  In: OpenFOAM workshop  
Ivankovic A; Quan D; Tukovic Z; Murphy N (2017) Fracture behaviour of epoxy adhesives modified with core-shell rubber nanoparticles  In: Proceedings of the 8th International Conference on Fracture of Polymers, Composites and Adhesives, Les Diablerets, Switzerland, (2017).  
Dr David Mc Keown
Victorio Úbeda Sosa, Daire Sherwin, Joseph Thompson, David McKeown,; O’Connor W (2018) Modelling EIRSAT-1 dynamics and actuation to validate and test a novel attitude control system  In: 2nd Symposium on Space Educational Activities  
Timon Schild, Joseph Thompson, Daire Sherwin,WilliamO’Connor, David McKeown (2018) Design of an Attitude Control Testbed for a CubeSat with Flexible Appendages  In: 2nd Symposium on Space Educational Activities  
Daire Sherwin, Joseph Thompson, David McKeown, William O’Connor, Victorio Úbeda Sosa (2018) Wave-based attitude control of EIRSAT-1, 2U cubesat  In: 2nd Symposium on Space Educational Activities  
Oconnor W; David M (2018) Wave-based motion control of flexible space systems  In: 69th International Astronautical Congress (IAC)  
David Murphy, Joe Flanagan, Joseph Thompson, Maeve Doyle, Rachel Dunwoody, Jessica Erkal, Gianluca Fontanesi, Andrew Gloster, Joseph Mangan, Conor O’Toole, Jack Reilly, Lána Salmon, Daire Sherwin, Sarah Walsh, Paul Cahill, Umair Javaid, Daithí de Faoithe, Sheila McBreen, David McKeown, William O’Connor, Kenneth Stanton, Alexei Ulyanov, Ronan Wall, Lorraine Hanlon (2018) EIRSAT-1: The Educational Irish Research Satellite  In: 69th International Astronautical Congress (IAC)  
Dr Neal Murphy
Ivankovic A; Cardiff P; Murphy N; Quan D; Tukovic Z (2018) Intrinsic fracture properties of rubber modified epoxy adhesives  In: the 41st Annual Meeting of the Adhesion Society & 6th World Congress on Adhesion and Related Phenomena  
N. Murphy, L. Castellani, A.J. Kinloch (2017) Peel testing of flexible laminates - the development of a new international standard  In: 8th International Conference on Fracture of Polymers, Composites and Adhesives, Les Diablerets, Switzerland  
Dr Aisling Ní Annaidh
Ling AI; Ni Annaidh A (2017) THE HEAT DISSIAPATION OF GUTTURAL POUCHES IN HORSES  In: IRISH JOURNAL OF MEDICAL SCIENCE  
Zambrano, L; Ni Annaidh, A; (2017) Development of an elasticity density relationship for cranial bone  In: 7th International conference on Mechanics of biomedical materials and tissues  
Dr Eoin O'Cearbhaill
Mooney N; Walsh E; Black A; Kenny D; Wang W; Jones JFX; O'Cearbhaill ED; Flanagan TC (2017) DESIGN & PRODUCTION OF A NOVEL, SYNTHETIC STENTED HEART VALVE FOR MINIMALLY-INVASIVE DELIVERY IN PAEDIATRIC PATIENTS  In: IRISH JOURNAL OF MEDICAL SCIENCE  
Aboud D; O'Cearbhaill ED; Flanagan TC (2017) DESIGN & DEVELOPMENT OF A BIOREACTOR SYSTEM FOR IN VITRO TESTING OF TISSUE-ENGINEERED HEART VALVES  In: IRISH JOURNAL OF MEDICAL SCIENCE  
Dr James O'Donnell
Pinheiro S; Kenny P; O'Donnell J (2017) Requirements Specification for Building Managers  In: CITA BIM Gathering 2017, Croke Park, Dublin  
Beagon P; Warren J; Finn D; O Donnell J (2018) Operational characterisation of neighbourhood heat energy after large-scale building retrofit  In: REHVA World Congress  
Alshehri F; Kenny P; Pinheiro S; Ali U; O'Donnell J (2017) Development of a Model View Definition (MVD) for thermal comfort analysis in commercial buildings using BIM and EnergyPlus.  In: CITA BIM Gathering2017  
Dr Vikram Pakrashi
Bekic D; Kerin I; Cahill P; Michalis P; Lapthorne J; Solman H; Gilja G; Potocki K; Pakrashi V; McKeogh E (2018) BRIDGE SMS - Innovative Solution for Management of Bridges Over Water  In: CETRA 2018, 5th International Conference on Road and Rail Infrastrcuture, Zadar, Croatia  
O’Donnell D, Murphy J and Pakrashi V. (2018). Dynamic Response Distribution Fits of A Floating Spar Platform In: An Ocean Wave Basin For Structural Changes. First International Conference on Health Monitoring of Civil And Maritime Structures, London, UK  
Gilja G, Kerin I, Michalis P, Bekic D, Pakrashi V and McKeogh E. (2017). Analysis of Uncertainties in Bridge Scour Estimation. 15th International Symposium on Water Management and Hydraulic Engineering, WMHE 2017, Croatia  
Cahill P, Michalis P, Gilja G, Bekic D, Pakrashi V and McKeogh E. (2017).  Bridge Management Strategies: Current and Future Trends. 15th International Symposium on Water Management and Hydraulic Engineering, WMHE 2017, Croatia.  
Cahill P; Mathewson A; Pakrashi V (2018) Laboratory based experimental investigation of patch based piezoelectric energy harvesters for civil infrastructure. Civil Engineering Research Ireland  In: Civil Engineering Research Ireland. 2018 and Irish Transportation Research Network 2018 (CERI-ITRN2018), Dublin, Ireland.  
O'Donnell D; Murphy J; Pakrashi V (2018) Dynamic Response Distribution Fits of A Floating Spar Platform In An Ocean Wave Basin For Structural Changes  In: First International Conference on Health Monitoring of Civil And Maritime Structures, London, UK.  
Bekic D; Kerin I; Verkade J; Gilja G; Pakrashi V; McKeogh E (2018) Flood Early Warning Systems for Supporting Decision Processes on Roads and Bridges  In: COST TU1406 Wroclaw Workshop, 2018, Poland  
Joshi S; Pakrashi V (2018) IBMS: Results Diversity And Quality Control  In: COST TU1406 Wroclaw Workshop, 2018, Poland  
O'Byrne M; Ghosh B; Schoefs F; Pakrashi V (2018) Inspection of Marine Renewable Energy Devices  In: 5th International Conference on Energy, Sustainability and Climate Change, ESCC 2018, Mykonos, Greece.  
Vathakkatil Joseph G; Ali SF; Gupta S; Pakrashi V (2018) Energy harvesting using array of rotating pendulums suspended from axially vibrating rigid rod  In: European Solid Mechanics Conference ESMC 2018, Italy.  
Noble D; Nogal M; O'Connor A; Pakrashi V (2018) A bespoke signal processing algorithm for operational modal analysis of post-tensioned steel and concrete beams  In: 9th international conference on bridge maintenance, safety and management (IABMAS2018), Melbourne, Australia.  
McHale T; O'Byrne M; Doorley R; Rittgers G; Ghosh B; Pakrashi V (2018) The Influence of Passing Events on Cyclists Behavior and Risk Perception  In: Civil Engineering Research Ireland 2018 and Irish Transportation Research Network 2018 (CERI-ITRN2018), Dublin, Ireland.  
Pakrashi V; Maitra R (2018) Post BREXIT Influences on Irish freight logistics: A critique  In: Civil Engineering Research Ireland 2018 and Irish Transportation Research Network 2018 (CERI-ITRN2018), Dublin, Ireland.  
O'Byrne M; Ghosh B; Schoefs F; Pakrashi V (2018) Damage Assessment of the Built Infrastructure using Smartphones  In: Civil Engineering Research Ireland 2018 and Irish Transportation Research Network 2018 (CERI-ITRN2018), Dublin, Ireland.  
Assoc Professor Nikolaos Papakostas
Holligan C; Hargaden V; Papakostas N (2018) Product lifecycle management and digital manufacturing technologies in the era of cloud computing  In: 2017 International Conference on Engineering, Technology and Innovation: Engineering, Technology and Innovation Management Beyond 2020: New Challenges, New Approaches, ICE/ITMC 2017 - Proceedings Available Online  
Hargaden V; Papakostas N; Toomey J (2018) An application of game based learning in an electronics industry graduate training program  In: 2017 International Conference on Engineering, Technology and Innovation: Engineering, Technology and Innovation Management Beyond 2020: New Challenges, New Approaches, ICE/ITMC 2017 - Proceedings Available Online  
Dr Yurgos Politis
Politis Y; Leahy M; Sung C; Goodman L (2018) Let Us Converse Virtually! Conversation Skills Training through Virtual Reality  In: INSAR, Rotterdam, Netherlands  
Politis Y; Leahy M; Sung C; Goodman L; Olivia L; Olivia T; Clemente I; Lim Z (2018) Conversation skill training in Virtual Reality: a study with people with communication deficit  In: DISES, Cape Town, South Africa  
Dr Dong Quan
Ivankovic A; Cardiff P; Murphy N; Quan D; Tukovic Z (2018) Intrinsic fracture properties of rubber modified epoxy adhesives  In: the 41st Annual Meeting of the Adhesion Society & 6th World Congress on Adhesion and Related Phenomena  
Ivankovic A; Quan D; Tukovic Z; Murphy N (2017) Fracture behaviour of epoxy adhesives modified with core-shell rubber nanoparticles  In: Proceedings of the 8th International Conference on Fracture of Polymers, Composites and Adhesives, Les Diablerets, Switzerland, (2017).  
Dr Mohammad Saffari
Saffari M; De Gracia A; Fernández C; Zsembinszki G; Cabeza LF (2017) Study on the optimum PCM melting temperature for energy savings in residential buildings worldwide  In: IOP Conference Series: Materials Science and Engineering Available Online  
Professor Kenneth Stanton
Murphy D; Joe F; Thompson J; Doyle M; Erkal J; Gloster A; O'Toole C; Salmon L; Sherwin D; Walsh S (2018) EIRSAT-1 - The Educational Irish Research Satellite  In: 2nd Symposium on Space Educational Activities, Budapest, Hungary  
Dr Nan Zhang
Gilchrist M; Zhang H; Fang F; Zhang N (2018) Experimental and numerical study of the filling of a micro feature based on a microfluidic flow cytometer chip using micro injection moulding  In: NanoMan 2018, London, UK  
Gilchrist M; Zhang N; Zhang H; Fang F (2018) Geometric replication integrity of micro features manufactured using variotherm assisted micro injection moulding  In: CIRP 4th Conference on Surface Integrity, Tianjin, China  

Back to Top

Published Reports

Dr David Mc Keown
Mc Keown D; O'Connor W (2018)  IXO requirements specification for WBC study. European Space Agency: European Space Agency  
McKeown, D.J, Sherwin, D, O’Connor W.J (2017)  Wave Based Toolbox -Functional Test Run Results. European Space Agency: European Space Agency  

Back to Top

Other Publications

Dr Vincent Hargaden
Hargaden, V. & Cronin, M. (2017)  Is 'intrapreneurship' part of your growth strategy?. Engineers Journal Available Online  
Hargaden, V. (2017)  Accelerate your career with UCD's Master of Engineering Management. Engineers Journal Available Online  

Back to Top

Book Chapters

Professor Denis Dowling
Law VJ; Dowling DP (2020) 'Microwave Oven Plasma Reactor Moding and Its Detection'  , pp.157-179 Available Online  
Professor Michael Gilchrist
McMunn LE; Hoshizaki TB; Robidoux M; Gilchrist MD; Karton C; Post A (2020) 'Comparison of Head Impact Frequency and Magnitude for Midget and Junior Ice Hockey Players to Inform Safety and Policy' In:  Safety in Ice Hockey: 6th Volume. ASTM International. , pp.21-44 Available Online  
Dr Hugo Lhachemi
Shorten R; Oliver J; Clayton D; Malik A; Lhachemi H (2020) 'Industry 4.0 and the sharing economy' In:  Analytics for the Sharing Economy: Mathematics, Engineering and Business Perspectives., pp.335-345 Available Online  

Back to Top

Journal Articles

Mr Hisham Abourayana
Dowling DP; Abourayana HM; Brantseva T; Antonov A; Dobbyn PJ (2020) 'Enhancing the mechanical performance of 3D-printed basalt fiber-reinforced composites using in-line atmospheric plasma pretreatments'. Plasma Processes and Polymers 17 (1) Available Online  
Dr Eamonn Ahearne
Ahearne E (2020) 'Engineering the surface for direct part marking (DPM)'. CIRP Journal of Manufacturing Science and Technology 29 :1-10.Available Online  
Trimble D; Agarwal A; McDonnell D; Barron S; Ahearne E; O'Donnell GE (2020) 'Finite element simulation of orthogonal machining of biomedical grade Co–Cr–Mo alloy'. CIRP Journal of Manufacturing Science and Technology 28 :8-14.Available Online  
Dr Basuraj Bhowmik
Bhowmik B; Tripura T; Hazra B; Pakrashi V (2020) 'Real time structural modal identification using recursive canonical correlation analysis and application towards online structural damage detection'. Journal of Sound and Vibration 468 Available Online  
Bhowmik B; Tripura T; Hazra B; Pakrashi V (2020) 'Robust linear and nonlinear structural damage detection using recursive canonical correlation analysis'. Mechanical Systems and Signal Processing 136 Available Online  
Tripura T; Bhowmik B; Pakrashi V; Hazra B (2020) 'Real-time damage detection of degrading systems'. Structural Health Monitoring 19 (3) :810-837.Available Online  
Professor David Browne
Abad MD; Browne DJ (2020) 'An Investigation of the Tribological Behavior of Hf-Based Bulk Metallic Glass and Crystalline Alloys'. Journal of Tribology 142 (10) Available Online  
Révész Á; Horváth A; Ribárik G; Schafler E; Browne DJ; Kovács Z (2020) 'Crystallization of Cu<inf>60</inf>Zr<inf>20</inf>Ti<inf>20</inf> bulk metallic glass by high pressure torsion'. Reviews on Advanced Materials Science 58 (1) :304-312.Available Online  
Dr Philip Cardiff
Bernardo P; Réamoinn RM; Young P; Brennan D; Cardiff P; Keenahan J (2019) 'Investigation of helicopter downwash effect on pedestrian comfort using CFD'. Infrastructure Asset Management  :1-10.Available Online  
Berney MJ; Gibbons J; Fitzgerald MK; Cardiff DP; Leonard M (2019) 'Computational modelling of forces acting on the femur in acetabular fractures: A finite element analysis study'. Journal of Orthopaedics 16 (6) :603-618.Available Online  
Dr Mert Celikin
Celikin M; Maalekian M; Pekguleryuz M (2019) 'Effect of Sb Additions on the Creep Behaviour of Bi Containing SAC Alloys'. Journal of Electronic Materials 48 (9) :5562-5569.Available Online  
Kaschel FR; Vijayaraghavan RK; Shmeliov A; McCarthy EK; Canavan M; McNally PJ; Dowling DP; Nicolosi V; Celikin M (2020) 'Mechanism of stress relaxation and phase transformation in additively manufactured Ti-6Al-4V via in situ high temperature XRD and TEM analyses'. Acta Materialia 188 :720-732.Available Online  
King G; Celikin M; Gomez MA; Becze L; Petkov V; Della Ventura G (2020) 'Revealing the structures and relationships of Ca(ii)–Fe(iii)–AsO4 minerals: arseniosiderite and yukonite'. Environmental Science: Nano  Available Online  
R. Kaschel F; Celikin M; Dowling DP (2020) 'Effects of laser power on geometry, microstructure and mechanical properties of printed Ti-6Al-4V parts'. Journal of Materials Processing Technology 278 Available Online  
Manita Dangol
Krieger KJ; Bertollo N; Dangol M; Sheridan JT; Lowery MM; O’Cearbhaill ED (2019) 'Simple and customizable method for fabrication of high-aspect ratio microneedle molds using low-cost 3D printing'. Microsystems and Nanoengineering 5 (1) Available Online  
Dr Daithi De Faoite
Gorman CM; de Faoite D; Flannery D; Ratajczak M; Kelly T; Stanton KT (2019) 'Alteration of the intaglio surface of lithium disilicate glass-ceramic'. Journal of Prosthetic Dentistry 122 (4) :4110-4110000000000.Available Online  
Ruane RA; Doherty KAJ; Dorrepaal R; Twomey B; Gowen A; Flanagan J; de Faoite D; Stanton KT (2019) 'Hyperspectral imaging with unsupervised pattern recognition: A novel surface characterization technique for thermal control coatings'. Materials Letters 254 :273-277.Available Online  
Dr Mattia De Rosa
D'Ettorre F; De Rosa M; Conti P; Testi D; Finn D (2019) 'Mapping the energy flexibility potential of single buildings equipped with optimally-controlled heat pump, gas boilers and thermal storage'. Sustainable Cities and Society 50 Available Online  
Kathirgamanathan A; Péan T; Zhang K; De Rosa M; Salom J; Kummert M; Finn DP (2020) 'Towards standardising market-independent indicators for quantifying energy flexibility in buildings'. Energy and Buildings 220 Available Online  
Pallonetto F; De Rosa M; D'Ettorre F; Finn DP (2020) 'On the assessment and control optimisation of demand response programs in residential buildings'. Renewable and Sustainable Energy Reviews 127 Available Online  
Pallonetto F; De Rosa M; Finn DP (2020) 'Environmental and economic benefits of building retrofit measures for the residential sector by utilizing sensor data and advanced calibrated models'. Advances in Building Energy Research  Available Online  
Rosa MD (2020) 'Economic assessment of producing and selling biomethane into a regional market'. Energy and Environment 31 (1) :60-76.Available Online  
Professor Denis Dowling
Bonomo M; Di Girolamo D; Piccinni M; Dowling DP; Dini D (2020) 'Electrochemically deposited NiO films as a blocking layer in p‐type dye‐sensitized solar cells with an impressive 45% fill factor'. Nanomaterials 10 (1) Available Online  
Dowling DP; Abourayana HM; Brantseva T; Antonov A; Dobbyn PJ (2020) 'Enhancing the mechanical performance of 3D-printed basalt fiber-reinforced composites using in-line atmospheric plasma pretreatments'. Plasma Processes and Polymers 17 (1) Available Online  
Egan DS; Dowling DP (2019) 'Influence of process parameters on the correlation between in-situ process monitoring data and the mechanical properties of Ti-6Al-4V non-stochastic cellular structures'. Additive Manufacturing 30 Available Online  
Egan DS; Dowling DP (2020) 'Correlating in-situ process monitoring data with the reduction in load bearing capacity of selective laser melted Ti–6Al–4V porous biomaterials'. Journal of the Mechanical Behavior of Biomedical Materials 106 Available Online  
Kaschel FR; Vijayaraghavan RK; Shmeliov A; McCarthy EK; Canavan M; McNally PJ; Dowling DP; Nicolosi V; Celikin M (2020) 'Mechanism of stress relaxation and phase transformation in additively manufactured Ti-6Al-4V via in situ high temperature XRD and TEM analyses'. Acta Materialia 188 :720-732.Available Online  
O'Connor H; Dowling DP (2020) 'Evaluation of the protective performance of hydrophobic coatings applied on carbon-fibre epoxy composites'. Journal of Composite Materials 54 (10) :1327-1338.Available Online  
O'Connor HJ; Dowling DP (2019) 'Low-pressure additive manufacturing of continuous fiber-reinforced polymer composites'. Polymer Composites 40 (11) :4329-4339.Available Online  
O’ Connor HJ; Dowling DP (2020) 'Comparison between the properties of polyamide 12 and glass bead filled polyamide 12 using the multi jet fusion printing process'. Additive Manufacturing 31 Available Online  
R. Kaschel F; Celikin M; Dowling DP (2020) 'Effects of laser power on geometry, microstructure and mechanical properties of printed Ti-6Al-4V parts'. Journal of Materials Processing Technology 278 Available Online  
Walls M; O’Connor H; Dowling DP; Goggins J (2019) 'Testing of Hydrophobically Coated Composite Materials With Marine Renewable Energy Applications'. Infrastructure Asset Management  :1-11.Available Online  
Zhang H; Dickson AN; Sheng Y; McGrail T; Dowling DP; Wang C; Neville A; Yang D (2020) 'Failure analysis of 3D printed woven composite plates with holes under tensile and shear loading'. Composites Part B: Engineering 186 Available Online  
Professor Fengzhou Fang
Duan Y; Vo Q; Zhang X; Wang Y; Huang S; Fang F (2019) 'Novel method of measuring optical freeform surface based on laser focusing probe without calibrating focus error signal'. Measurement: Journal of the International Measurement Confederation 148 Available Online  
Fang F (2020) 'On Atomic and Close-to-atomic Scale Manufacturing -Development Trend of Manufacturing Technology'. Zhongguo Jixie Gongcheng/China Mechanical Engineering 31 (9) :1009-1021.Available Online  
Han W; Fang F (2019) 'Electropolishing of 316L stainless steel using sulfuric acid-free electrolyte'. Journal of Manufacturing Science and Engineering, Transactions of the ASME 141 (10) Available Online  
Han W; Fang F (2020) 'Investigation of electrochemical properties of electropolishing Co–Cr dental alloy'. Journal of Applied Electrochemistry 50 (3) :367-381.Available Online  
Han W; Fang F (2020) 'Two-step electropolishing of 316L stainless steel in a sulfuric acid-free electrolyte'. Journal of Materials Processing Technology 279 Available Online  
He Y; Lai M; Fang F (2019) 'A numerical study on nanometric cutting mechanism of lutetium oxide single crystal'. Applied Surface Science 496 Available Online  
Hou J; Zhang H; Zhang N; Fang F (2020) 'Characterization of manufacturability of microstructures for micro-injection moulding of micro devices using star patterns'. Journal of Micromechanics and Microengineering 30 (2) Available Online  
Hu CG; Sun ZY; Fang ZX; Liu J; Zhang H; Fang FZ (2020) 'Study on surface quality of polished optical materials with quasi-Brewster angle method'. Guangxue Jingmi Gongcheng/Optics and Precision Engineering 28 (2) :315-323.Available Online  
Ji L; Liu L; Xu Z; Song Y; Jin T; Li R; Fang F (2020) 'Molecular dynamics simulation on the effect of dislocation structures on the retention and distribution of helium ions implanted into silicon'. Nami Jishu yu Jingmi Gongcheng/Nanotechnology and Precision Engineering 3 (2) :81-87.Available Online  
Krishnan A; Fang F (2019) 'Review on mechanism and process of surface polishing using lasers'. Frontiers of Mechanical Engineering 14 (3) :299-319.Available Online  
Li Q; Fang F (2020) 'Physiology-like crystalline lens modelling for children'. Optics Express 28 (18) :27155-27180.Available Online  
Li X; Li J; Wei X; Yang X; Su Z; Liang J; Yang Z; Fang F (2020) 'A noncontact method for calibrating the angle and position of the composite module array'. Applied Sciences (Switzerland) 10 (12) Available Online  
Liang F; Kang C; Fang F (2020) 'A review on tool orientation planning in multi-axis machining'. International Journal of Production Research  :1-31.Available Online  
Liu B; Kang C; Fang F (2020) 'Biometric measurement of anterior segment: A review'. Sensors (Switzerland) 20 (15) :1-31.Available Online  
Liu L; Xu Z; Li R; Zhu R; Xu J; Zhao J; Wang C; Nordlund K; Fu X; Fang F (2019) 'Molecular dynamics simulation of helium ion implantation into silicon and its migration'. Nuclear Instruments and Methods in Physics Research, Section B: Beam Interactions with Materials and Atoms 456 :53-59.Available Online  
Liu R; Li Z; Duan Y; Fang F (2020) 'A design for a manufacturing-constrained off-axis four-mirror reflective system'. Applied Sciences (Switzerland) 10 (15) Available Online  
Lv Z; Su Z; Zhang D; Gao L; Yang Z; Fang F; Zhang H; Li X (2019) 'The self-calibration method for the vertex distance of the elliptical paraboloid array'. Applied Sciences (Switzerland) 9 (17) Available Online  
Mathew PT; Fang F (2020) 'Periodic energy decomposition analysis for electronic transport studies as a tool for atomic scale device manufacturing'. International Journal of Extreme Manufacturing 2 (1) Available Online  
Melentiev R; Fang F (2020) 'Fabrication of micro-channels on Co–Cr–Mo joints by micro-abrasive jet direct writing'. Journal of Manufacturing Processes 56 :667-677.Available Online  
Melentiev R; Fang F (2020) 'Tailoring of surface topography for tribological purposes by controlled solid particle impacts'. Wear 444-445 Available Online  
O'Hara J; Fang F (2019) 'Advances in micro cutting tool design and fabrication'. International Journal of Extreme Manufacturing 1 (3) Available Online  
O’Toole L; Kang C; Fang F (2020) 'Advances in Rotary Ultrasonic-Assisted Machining'. Nanomanufacturing and Metrology 3 (1) Available Online  
O’Toole L; Kang CW; Fang FZ (2020) 'Precision micro-milling process: state of the art'. Advances in Manufacturing  Available Online  
Pan J; Yan N; Zhu L; Zhang X; Fang F (2020) 'Comprehensive defect-detection method for a small-sized curved optical lens'. Applied Optics 59 (1) :234-243.Available Online  
Song Y; Xu Z; Liu T; Rommel M; Wang H; Wang Y; Fang F (2020) 'Depth profiling of ion-implanted 4H–SiC using confocal raman spectroscopy'. Crystals 10 (2) Available Online  
Vo Q; Duan Y; Zhang X; Fang F (2019) 'Non-contact method of thickness measurement for a transparent plate using a laser auto-focus scanning probe'. Applied Optics 58 (35) :9524-9531.Available Online  
Wang J; Fang F; Yan G; Guo Y (2019) 'Study on Diamond Cutting of Ion Implanted Tungsten Carbide With and Without Ultrasonic Vibration'. Nanomanufacturing and Metrology 2 (3) :177-185.Available Online  
Wang JS; Zhang XD; Fang FZ (2020) 'Numerical study via total Lagrangian smoothed particle hydrodynamics on chip formation in micro cutting'. Advances in Manufacturing 8 (2) :144-159.Available Online  
Wang X; Xu Z; Rommel M; Dong B; Song L; Tee CAT; Fang F (2019) 'Electron paramagnetic resonance characterization of aluminum ion implantationinduced defects in 4H-SiC'. Nami Jishu yu Jingmi Gongcheng/Nanotechnology and Precision Engineering 2 (4) :157-162.Available Online  
Wang Z; Zhang J; Li G; Xu Z; Zhang H; Zhang J; Hartmaier A; Fang F; Yan Y; Sun T (2020) 'Anisotropy-Related Machining Characteristics in Ultra-Precision Diamond Cutting of Crystalline Copper'. Nanomanufacturing and Metrology 3 (2) :123-132.Available Online  
Wang Z; Zhang J; Xu Z; Zhang J; Li G; Zhang H; Li Z; Hassan HU; Fang F; Hartmaier A (2020) 'Crystal anisotropy-dependent shear angle variation in orthogonal cutting of single crystalline copper'. Precision Engineering 63 :41-48.Available Online  
Wu Y; Zhang X; Fang F (2020) 'Automatic fabric defect detection using cascaded mixed feature pyramid with guided localization'. Sensors (Switzerland) 20 (3) Available Online  
Xie W; Fang F (2019) 'Cutting-Based Single Atomic Layer Removal Mechanism of Monocrystalline Copper: Atomic Sizing Effect'. Nanomanufacturing and Metrology 2 (4) :241-252.Available Online  
Xie W; Fang F (2020) 'Effect of tool edge radius on material removal mechanism in atomic and close-to-atomic scale cutting'. Applied Surface Science 504 Available Online  
Xie W; Fang F (2020) 'Mechanism of atomic and close-to-atomic scale cutting of monocrystalline copper'. Applied Surface Science 503 Available Online  
Xie W; Fang F (2020) 'On the mechanism of dislocation-dominated chip formation in cutting-based single atomic layer removal of monocrystalline copper'. International Journal of Advanced Manufacturing Technology 108 (43987) :1587-1599.Available Online  
Xie W; Fang F (2020) 'Rake angle effect in cutting-based single atomic layer removal'. Journal of Manufacturing Processes 56 :280-294.Available Online  
Xu F; Fang F; Zhang X (2019) 'Study on surface generation in nano-cutting by large-scale molecular dynamics simulation'. International Journal of Advanced Manufacturing Technology 104 (44174) :4325-4329.Available Online  
Xu Z; Liu L; He Z; Tian D; Hartmaier A; Zhang J; Luo X; Rommel M; Nordlund K; Zhang G (2020) 'Nanocutting mechanism of 6H-SiC investigated by scanning electron microscope online observation and stress-assisted and ion implant-assisted approaches'. International Journal of Advanced Manufacturing Technology 106 (44113) :3869-3880.Available Online  
Yi R; Zhang Y; Zhang X; Fang F; Deng H (2020) 'A generic approach of polishing metals via isotropic electrochemical etching'. International Journal of Machine Tools and Manufacture 150 Available Online  
Yu N; Liu J; Durand HM; Fang F (2020) 'Mechanically enabled two-axis ultrasonic-assisted system for ultra-precision machining'. Micromachines 11 (5) Available Online  
Yu N; Yang Y; Jourdain R; Gourma M; Bennett A; Fang F (2020) 'Design and optimization of plasma jet nozzles based on computational fluid dynamics'. International Journal of Advanced Manufacturing Technology 108 (44050) :2559-2568.Available Online  
Yuan Y; Gu C; Huang S; Song L; Fang F (2020) 'Advances on studying optical forces: optical manipulation, optical cooling and light induced dynamics'. Journal of Physics D: Applied Physics 53 (28) Available Online  
Yuan Y; Gu C; Huang S; Song L; Yan G; Li Z; Fang F (2020) 'Study of laser induced dynamics on macroscopic mirror'. Journal of Optics (United Kingdom) 22 (3) Available Online  
Zhang H; Fang F; Gilchrist MD; Zhang N (2019) 'Precision replication of micro features using micro injection moulding: Process simulation and validation'. Materials and Design 177 Available Online  
Zhang H; Zhang N; Fang F (2020) 'Fabrication of high-performance nickel/graphene oxide composite coatings using ultrasonic-assisted electrodeposition'. Ultrasonics Sonochemistry 62 Available Online  
Zhang K; Xu Z; Rosenkranz A; Song Y; Xue T; Fang F (2019) 'Surface- and tip-enhanced Raman scattering in tribology and Lubricant detection-a prospective'. Lubricants 7 (9) Available Online  
Zhang Y; Fang F (2019) 'Development of planar diffractive waveguides in optical see-through head-mounted displays'. Precision Engineering 60 :482-496.Available Online  
Zhang Y; Fang F; Huang W; Chen Y; Qi S; Yu M (2019) 'Dynamic Mechanical Hysteresis of Magnetorheological Elastomers Subjected to the Cyclic Loading and Periodic Magnetic Field'. Frontiers in Materials 6 Available Online  
Zhang Y; Yan G; You K; Fang F (2020) 'Study on α-Al<inf>2</inf>O<inf>3</inf> anti-adhesion coating for molds in precision glass molding'. Surface and Coatings Technology 391 Available Online  
Zhao Y; Fang F (2020) 'Measurement of the peripheral aberrations of human eyes: A comprehensive review'. Nami Jishu yu Jingmi Gongcheng/Nanotechnology and Precision Engineering 3 (2) :53-68.Available Online  
Zheng Y; Song L; Huang J; Zhang H; Fang F (2019) 'Detection of the three-dimensional trajectory of an object based on a curved bionic compound eye'. Optics Letters 44 (17) :4143-4146.Available Online  
Zhou Y; Zhang J; Fang F (2020) 'Advances in the design of optical see-through displays'. Advanced Optical Technologies 9 (4) :167-186.Available Online  
Assoc Professor Donal Finn
Andrade-Cabrera C; O'Dwyer C; Finn DP (2020) 'Integrated cost-optimal residential envelope retrofit decision-making and power systems optimisation using Ensemble models'. Energy and Buildings 214 Available Online  
Buttitta G; Finn DP (2020) 'A high-temporal resolution residential building occupancy model to generate high-temporal resolution heating load profiles of occupancy-integrated archetypes'. Energy and Buildings 206 Available Online  
Buttitta G; Turner WJN; Neu O; Finn DP (2019) 'Development of occupancy-integrated archetypes: Use of data mining clustering techniques to embed occupant behaviour profiles in archetypes'. Energy and Buildings 198 :84-99.Available Online  
D'Ettorre F; De Rosa M; Conti P; Testi D; Finn D (2019) 'Mapping the energy flexibility potential of single buildings equipped with optimally-controlled heat pump, gas boilers and thermal storage'. Sustainable Cities and Society 50 Available Online  
Goy S; Maréchal F; Finn D (2020) 'Data for urban scale building energy modelling: Assessing impacts and overcoming availability challenges'. Energies 13 (6) Available Online  
Kathirgamanathan A; Péan T; Zhang K; De Rosa M; Salom J; Kummert M; Finn DP (2020) 'Towards standardising market-independent indicators for quantifying energy flexibility in buildings'. Energy and Buildings 220 Available Online  
Pallonetto F; De Rosa M; D'Ettorre F; Finn DP (2020) 'On the assessment and control optimisation of demand response programs in residential buildings'. Renewable and Sustainable Energy Reviews 127 Available Online  
Pallonetto F; De Rosa M; Finn DP (2020) 'Environmental and economic benefits of building retrofit measures for the residential sector by utilizing sensor data and advanced calibrated models'. Advances in Building Energy Research  Available Online  
Dr Pezhman Ghadimi
Ghadimi P; O'Neill S; Wang C; Sutherland JW (2020) 'Analysis of enablers on the successful implementation of green manufacturing for Irish SMEs'. Journal of Manufacturing Technology Management  Available Online  
Wang C; Zhang X; Wang M; Lim MK; Ghadimi P (2019) 'Predictive analytics of the copper spot price by utilizing complex network and artificial neural network techniques'. Resources Policy 63 Available Online  
Professor Michael Gilchrist
Chen W; Post A; Karton C; Gilchrist MD; Robidoux M; Hoshizaki TB (2020) 'A comparison of frequency and magnitude of head impacts between Pee Wee And Bantam youth ice hockey'. Sports Biomechanics  Available Online  
Clark JM; Adanty K; Post A; Hoshizaki TB; Clissold J; McGoldrick A; Hill J; Annaidh AN; Gilchrist MD (2020) 'Proposed injury thresholds for concussion in equestrian sports'. Journal of Science and Medicine in Sport 23 (3) :222-236.Available Online  
Clark JM; Connor TA; Williams C; Clissold J; McGoldrick A; Hill J; Annaidh AN; Gilchrist MD (2019) 'Analysis of helmet damage and associated head injuries arising from real-world equestrian fall accidents'. Journal of Testing and Evaluation 48 (3) Available Online  
Clark JM; Hoshizaki TB; Annaidh AN; Gilchrist MD (2020) 'Equestrian Helmet Standards: Do They Represent Real-World Accident Conditions?'. Annals of Biomedical Engineering 48 (8) :2247-2267.Available Online  
Clark JM; Hoshizaki TB; Gilchrist MD (2020) 'Event-specific impact test protocol for ice hockey goaltender masks'. Sports Biomechanics 19 (4) :510-531.Available Online  
Connor TA; Clark JM; Brama P; Stewart M; Annaidh AN; Gilchrist MD (2020) 'An evidence basis for future equestrian helmet lateral crush certification tests'. Applied Sciences (Switzerland) 10 (7) Available Online  
Connor TA; Clark JM; Jayamohan J; Stewart M; McGoldrick A; Williams C; Seemungal BM; Smith R; Burek R; Gilchrist MD (2019) 'Do equestrian helmets prevent concussion? A retrospective analysis of head injuries and helmet damage from real-world equestrian accidents'. Sports Medicine - Open 5 (1) Available Online  
Connor TA; Colgan N; Stewart M; Ní Annaidh A; Gilchrist MD (2020) 'Inertial properties of a living population for the development of biofidelic headforms'. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology  Available Online  
Connor TA; Stewart M; Burek R; Gilchrist MD (2019) 'Influence of headform mass and inertia on the response to oblique impacts'. International Journal of Crashworthiness 24 (6) :677-698.Available Online  
Dawson L; Koncan D; Post A; Zemek R; Gilchrist MD; Marshall S; Hoshizaki TB (2020) 'Biomechanical comparison of real world concussive impacts in children, adolescents, and adults'. Journal of Biomechanical Engineering 142 (7) Available Online  
de Grau S; Post A; Hoshizaki TB; Gilchrist MD (2020) 'Effects of surface compliance on the dynamic response and strains sustained by a player’s helmeted head during ice hockey impacts'. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology 234 (1) :98-106.Available Online  
Kendall M; Anna Oeur; Brien SE; Cusimano M; Marshall S; Gilchrist MD; Hoshizaki TB (2020) 'Accident reconstructions of falls, collisions, and punches in sports'. Journal of Concussion 4 :205970022093695-205970022093695.Available Online  
Koncan D; Gilchrist M; Vassilyadi M; Hoshizaki TB (2020) 'Simulated brain strains resulting from falls differ between concussive events of young children and adults'. Computer Methods in Biomechanics and Biomedical Engineering 23 (9) :500-509.Available Online  
MacManus DB; Maillet M; O'Gorman S; Pierrat B; Murphy JG; Gilchrist MD (2019) 'Sex- and age-specific mechanical properties of liver tissue under dynamic loading conditions'. Journal of the Mechanical Behavior of Biomedical Materials 99 :240-246.Available Online  
Martin SA; Kirby BM; Kelly G; Gilchrist MD; Milgram J (2020) 'Force distribution in the canine proximal radio-ulnar joint on extension of the carpal joint: A cadaveric study'. Veterinary and Comparative Orthopaedics and Traumatology  Available Online  
Michio Clark J; Connor TA; Post A; Blaine Hoshizaki T; Annaidh AN; Gilchrist MD (2020) 'Could a compliant foam anvil characterize the biofidelic impact response of equestrian helmets?'. Journal of Biomechanical Engineering 142 (6) Available Online  
Pierrat B; Carroll L; Merle F; MacManus DB; Gaul R; Lally C; Gilchrist MD; Ní Annaidh A (2020) 'Mechanical Characterization and Modeling of the Porcine Cerebral Meninges'. Frontiers in Bioengineering and Biotechnology 8 Available Online  
Post A; Dawson L; Hoshizaki TB; Gilchrist MD; Cusimano MD (2020) 'Development of a test method for adult ice hockey helmet evaluation'. Computer Methods in Biomechanics and Biomedical Engineering 23 (11) :690-702.Available Online  
Post A; Hashim E; Hoshizaki TB; Gilchrist MD; Cusimano MD (2020) 'A preliminary examination of the relationship between biomechanical measures and structural changes in the brain'. Trauma (United Kingdom)  Available Online  
Post A; Hashim E; Ting WKC; Hoshizaki TB; Gilchrist MD; Cusimano MD (2020) 'A preliminary analysis of biomechanics and saccadic responses for concussion'. Trauma (United Kingdom) 22 (3) :182-192.Available Online  
Post A; Karton C; Thevenot O; Hoshizaki TB; Robidoux M; Gilchrist MD (2020) 'Comparison of frequency and magnitude of head impacts experienced by Peewee boys and girls in games of youth ice hockey'. Computer Methods in Biomechanics and Biomedical Engineering  Available Online  
Taylor K; Hoshizaki TB; Gilchrist M (2019) 'The influence of impact force redistribution and redirection on maximum principal strain for helmeted head impacts'. Computer Methods in Biomechanics and Biomedical Engineering 22 (13) :1047-1060.Available Online  
Taylor K; Post A; Hoshizaki TB; Gilchrist MD (2019) 'The effect of a novel impact management strategy on maximum principal strain for reconstructions of American football concussive events'. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology 233 (4) :503-513.Available Online  
Trotta A; Clark JM; McGoldrick A; Gilchrist MD; Annaidh AN (2020) 'Biofidelic finite element modelling of brain trauma: Importance of the scalp in simulating head impact'. International Journal of Mechanical Sciences 173 Available Online  
Zhang H; Fang F; Gilchrist MD; Zhang N (2019) 'Precision replication of micro features using micro injection moulding: Process simulation and validation'. Materials and Design 177 Available Online  
Zhang N; Liu J; Zhang H; Kent NJ; Diamond D; Gilchrist MD (2019) '3D printing of metallic microstructured mould using selective laser melting for injection moulding of plastic microfluidic devices'. Micromachines 10 (9) Available Online  
Professor Lizbeth Goodman
See ZS; Dey A; Goodman L; Ng YK; Hight C; Billinghurst M; Sunar MS (2019) 'Creating high fidelity 360° virtual reality with high dynamic range spherical panorama images'. Virtual Creativity 9 (43862) :73-109.Available Online  
Mr Cathal Hoare
Ali U; Shamsi MH; Hoare C; Mangina E; O'Donnell J (2019) 'A data-driven approach for multi-scale building archetypes development'. Energy and Buildings 202 Available Online  
Professor Alojz Ivankovic
Quan D; Bologna F; Scarselli G; Ivankovic A; Murphy N (2020) 'Interlaminar fracture toughness of aerospace-grade carbon fibre reinforced plastics interleaved with thermoplastic veils'. Composites Part A: Applied Science and Manufacturing 128 Available Online  
Quan D; Mischo C; Binsfeld L; Ivankovic A; Murphy N (2020) 'Fracture behaviour of carbon fibre/epoxy composites interleaved by MWCNT- and graphene nanoplatelet-doped thermoplastic veils'. Composite Structures 235 Available Online  
Quan D; Mischo C; Li X; Scarselli G; Ivanković A; Murphy N (2019) 'Improving the electrical conductivity and fracture toughness of carbon fibre/epoxy composites by interleaving MWCNT-doped thermoplastic veils'. Composites Science and Technology 182 Available Online  
Quan D; Moloney P; Carolan D; Abourayana H; Ralph C; Ivankovic A; Dowling D; Murphy N (2020) 'Synergistic toughening and electrical functionalization of an epoxy using MWCNTs and silane- /plasma-activated basalt fibers'. Journal of Applied Polymer Science  Available Online  
Mr Chengwei Kang
Liang F; Kang C; Fang F (2020) 'A review on tool orientation planning in multi-axis machining'. International Journal of Production Research  :1-31.Available Online  
Liu B; Kang C; Fang F (2020) 'Biometric measurement of anterior segment: A review'. Sensors (Switzerland) 20 (15) :1-31.Available Online  
Dr Shane Keaveney
Duffy P; McMahon S; Wang X; Keaveney S; O'Cearbhaill ED; Quintana I; Rodríguez FJ; Wang W (2019) 'Synthetic bioresorbable poly-α-hydroxyesters as peripheral nerve guidance conduits; A review of material properties, design strategies and their efficacy to date'. Biomaterials Science 7 (12) :4912-4943.Available Online  
Dr Hugo Lhachemi
Lhachemi H; Prieur C (2020) 'Feedback Stabilization of a Class of Diagonal Infinite-Dimensional Systems with Delay Boundary Control'. IEEE Transactions on Automatic Control  :1-1.Available Online  
Lhachemi H; Prieur C; Shorten R (2019) 'An LMI condition for the robustness of constant-delay linear predictor feedback with respect to uncertain time-varying input delays'. Automatica 109 :108551-108551.Available Online  
Lhachemi H; Prieur C; Shorten R (2019) 'An LMI condition for the robustness of constant-delay linear predictor feedback with respect to uncertain time-varying input delays'. Automatica 109 Available Online  
Lhachemi H; Saussie D; Zhu G; Shorten R (2020) 'Input-To-State Stability of a Clamped-Free Damped String in the Presence of Distributed and Boundary Disturbances'. IEEE Transactions on Automatic Control 65 (3) :1248-1255.Available Online  
Lhachemi H; Shorten R (2019) 'ISS Property with respect to boundary disturbances for a class of Riesz-spectral boundary control systems'. Automatica 109 Available Online  
Lhachemi H; Shorten R (2020) 'Boundary feedback stabilization of a reaction–diffusion equation with Robin boundary conditions and state-delay'. Automatica 116 Available Online  
Lhachemi H; Shorten R; Prieur C (2019) 'Control Law Realification for the Feedback Stabilization of a Class of Diagonal Infinite-Dimensional Systems With Delay Boundary Control'. IEEE Control Systems Letters 3 (4) :930-935.Available Online  
Lhachemi H; Shorten R; Prieur C (2020) 'Exponential input-to-state stabilization of a class of diagonal boundary control systems with delay boundary control'. Systems and Control Letters 138 Available Online  
Malik A; Lhachemi H; Shorten R (2020) 'I-nteract: A Cyber-Physical System for Real-Time Interaction with Physical and Virtual Objects Using Mixed Reality Technologies for Additive Manufacturing'. IEEE Access 8 :98761-98774.Available Online  
Dr David MacManus
MacManus DB; Maillet M; O'Gorman S; Pierrat B; Murphy JG; Gilchrist MD (2019) 'Sex- and age-specific mechanical properties of liver tissue under dynamic loading conditions'. Journal of the Mechanical Behavior of Biomedical Materials 99 :240-246.Available Online  
Dr Neal Murphy
Quan D; Bologna F; Scarselli G; Ivankovic A; Murphy N (2020) 'Interlaminar fracture toughness of aerospace-grade carbon fibre reinforced plastics interleaved with thermoplastic veils'. Composites Part A: Applied Science and Manufacturing 128 Available Online  
Quan D; Bologna F; Scarselli G; Ivanković A; Murphy N (2020) 'Mode-II fracture behaviour of aerospace-grade carbon fibre/epoxy composites interleaved with thermoplastic veils'. Composites Science and Technology 191 Available Online  
Quan D; Deegan B; Alderliesten R; Dransfeld C; Murphy N; Ivanković A; Benedictus R (2020) 'The influence of interlayer/epoxy adhesion on the mode-I and mode-II fracture response of carbon fibre/epoxy composites interleaved with thermoplastic veils'. Materials and Design 192 Available Online  
Quan D; Deegan B; Binsfeld L; Li X; Atkinson J; Ivanković A; Murphy N (2020) 'Effect of interlaying UV-irradiated PEEK fibres on the mechanical, impact and fracture response of aerospace-grade carbon fibre/epoxy composites'. Composites Part B: Engineering 191 Available Online  
Quan D; Mischo C; Binsfeld L; Ivankovic A; Murphy N (2020) 'Fracture behaviour of carbon fibre/epoxy composites interleaved by MWCNT- and graphene nanoplatelet-doped thermoplastic veils'. Composite Structures 235 Available Online  
Quan D; Mischo C; Li X; Scarselli G; Ivanković A; Murphy N (2019) 'Improving the electrical conductivity and fracture toughness of carbon fibre/epoxy composites by interleaving MWCNT-doped thermoplastic veils'. Composites Science and Technology 182 Available Online  
Quan D; Moloney P; Carolan D; Abourayana H; Ralph C; Ivankovic A; Dowling D; Murphy N (2020) 'Synergistic toughening and electrical functionalization of an epoxy using MWCNTs and silane- /plasma-activated basalt fibers'. Journal of Applied Polymer Science  Available Online  
Dr Christopher Musgrave
Musgrave CSA; Shoji S; Nagai K (2020) 'Easy-handling minimum mass laser target scaffold based on sub-millimeter air bubble -An example of laser plasma extreme ultraviolet generation. '. Scientific reports 10 (1) :5906.Available Online  
Assoc Professor Aisling Ní Annaidh
Chen S; Ní Annaidh A; Roccabianca S (2020) 'A microstructurally inspired constitutive model for skin mechanics'. Biomechanics and Modeling in Mechanobiology 19 (1) :275-289.Available Online  
Clark JM; Adanty K; Post A; Hoshizaki TB; Clissold J; McGoldrick A; Hill J; Annaidh AN; Gilchrist MD (2020) 'Proposed injury thresholds for concussion in equestrian sports'. Journal of Science and Medicine in Sport 23 (3) :222-236.Available Online  
Clark JM; Connor TA; Williams C; Clissold J; McGoldrick A; Hill J; Annaidh AN; Gilchrist MD (2019) 'Analysis of helmet damage and associated head injuries arising from real-world equestrian fall accidents'. Journal of Testing and Evaluation 48 (3) Available Online  
Clark JM; Hoshizaki TB; Annaidh AN; Gilchrist MD (2020) 'Equestrian Helmet Standards: Do They Represent Real-World Accident Conditions?'. Annals of Biomedical Engineering 48 (8) :2247-2267.Available Online  
Connor TA; Clark JM; Brama P; Stewart M; Annaidh AN; Gilchrist MD (2020) 'An evidence basis for future equestrian helmet lateral crush certification tests'. Applied Sciences (Switzerland) 10 (7) Available Online  
Connor TA; Colgan N; Stewart M; Ní Annaidh A; Gilchrist MD (2020) 'Inertial properties of a living population for the development of biofidelic headforms'. Proceedings of the Institution of Mechanical Engineers, Part P: Journal of Sports Engineering and Technology  Available Online  
Michio Clark J; Connor TA; Post A; Blaine Hoshizaki T; Annaidh AN; Gilchrist MD (2020) 'Could a compliant foam anvil characterize the biofidelic impact response of equestrian helmets?'. Journal of Biomechanical Engineering 142 (6) Available Online  
Pierrat B; Carroll L; Merle F; MacManus DB; Gaul R; Lally C; Gilchrist MD; Ní Annaidh A (2020) 'Mechanical Characterization and Modeling of the Porcine Cerebral Meninges'. Frontiers in Bioengineering and Biotechnology 8 Available Online  
Trotta A; Clark JM; McGoldrick A; Gilchrist MD; Annaidh AN (2020) 'Biofidelic finite element modelling of brain trauma: Importance of the scalp in simulating head impact'. International Journal of Mechanical Sciences 173 Available Online  
Trotta A; Ní Annaidh A (2019) 'Mechanical characterisation of human and porcine scalp tissue at dynamic strain rates'. Journal of the Mechanical Behavior of Biomedical Materials 100 Available Online  
Dr Kevin Nolan
Kozlov D; Shitvov AP; Bulja S; Lundy R; Rulikowski P; Nolan K; Enright R (2020) 'Practical Mitigation of Passive Intermodulation in Microstrip Circuits'. IEEE Transactions on Electromagnetic Compatibility 62 (1) :163-172.Available Online  
Assoc Professor Eoin O'Cearbhaill
Duffy P; McMahon S; Wang X; Keaveney S; O'Cearbhaill ED; Quintana I; Rodríguez FJ; Wang W (2019) 'Synthetic bioresorbable poly-α-hydroxyesters as peripheral nerve guidance conduits; A review of material properties, design strategies and their efficacy to date'. Biomaterials Science 7 (12) :4912-4943.Available Online  
Humphreys O; Pickering M; O'Cearbhaill ED; Flanagan TC (2020) 'A biomimetic urethral model to evaluate urinary catheter lubricity and epithelial micro-trauma'. Journal of the Mechanical Behavior of Biomedical Materials 108 Available Online  
Krieger KJ; Bertollo N; Dangol M; Sheridan JT; Lowery MM; O’Cearbhaill ED (2019) 'Simple and customizable method for fabrication of high-aspect ratio microneedle molds using low-cost 3D printing'. Microsystems and Nanoengineering 5 (1) Available Online  
McMahon CJ; Ayoubi K; Mehanna R; Phelan E; O'Cearbhaill E; Russell J; Nölke L (2020) 'Outcome of congenital tracheal stenosis in children over two decades in a national cardiothoracic surgical unit'. Cardiology in the Young 30 (1) :34-38.Available Online  
O'Cearbhaill E (2019) 'Shedding light on implant-associated infection'. Science Translational Medicine 11 (511) Available Online  
O'Cearbhaill ED; Laulicht B; Mitchell N; Yu L; Valic M; Masiakos P; Karp JM (2019) 'A Radial Clutch Needle for Facile and Safe Tissue Compartment Access.'. Medical devices & sensors 2 (43987) Available Online  
O’Cearbhaill E (2019) 'Bound to get to the heart of a sticky problem'. Science Translational Medicine 11 (519) :eaaz9755-eaaz9755.Available Online  
O’Cearbhaill E (2020) 'Angling for a bug-inspired method of coating therapeutics onto microneedles'. Science Translational Medicine 12 (527) :eaba2914-eaba2914.Available Online  
Scheiner KC; Coulter F; Maas-Bakker RF; Ghersi G; Nguyen TT; Steendam R; Duffy GP; Hennink WE; O'Cearbhaill ED; Kok RJ (2020) 'Vascular Endothelial Growth Factor–Releasing Microspheres Based on Poly(ε-Caprolactone-PEG-ε-Caprolactone)-b-Poly(L-Lactide) Multiblock Copolymers Incorporated in a Three-Dimensional Printed Poly(Dimethylsiloxane) Cell Macroencapsulation Device'. Journal of Pharmaceutical Sciences 109 (1) :863-870.Available Online  
Dr James O'Donnell
Ali U; Shamsi MH; Bohacek M; Hoare C; Purcell K; Mangina E; O'Donnell J (2020) 'A data-driven approach to optimize urban scale energy retrofit decisions for residential buildings'. Applied Energy 267 Available Online  
Ali U; Shamsi MH; Hoare C; Mangina E; O'Donnell J (2019) 'A data-driven approach for multi-scale building archetypes development'. Energy and Buildings 202 Available Online  
Hu S; Hoare C; Raftery P; O'Donnell J (2019) 'Environmental and energy performance assessment of buildings using scenario modelling and fuzzy analytic network process'. Applied Energy 255 Available Online  
O'Donnell J; Truong-Hong L; Boyle N; Corry E; Cao J; Laefer DF (2019) 'LiDAR point-cloud mapping of building façades for building energy performance simulation'. Automation in Construction 107 Available Online  
Shamsi MH; Ali U; O’Donnell J (2019) 'A generalization approach for reduced order modelling of commercial buildings'. Journal of Building Performance Simulation 12 (6) :729-744.Available Online  
Assoc Professor Vikram Pakrashi
Bali S; Hazra B; Pakrashi V (2019) 'Quantile autoregressive modeling for non-linear change detection in vibrating structural systems'. Mechanics Research Communications 100 Available Online  
Benreguig P; Kelly J; Pakrashi V; Murphy J (2019) 'Wave-to-wire model development and validation for two OWC type wave energy converters'. Energies 12 (20) Available Online  
Bhowmik B; Tripura T; Hazra B; Pakrashi V (2020) 'Real time structural modal identification using recursive canonical correlation analysis and application towards online structural damage detection'. Journal of Sound and Vibration 468 Available Online  
Bhowmik B; Tripura T; Hazra B; Pakrashi V (2020) 'Robust linear and nonlinear structural damage detection using recursive canonical correlation analysis'. Mechanical Systems and Signal Processing 136 Available Online  
Doorley R; Pakrashi V; Szeto WY; Ghosh B (2020) 'Designing cycle networks to maximize health, environmental, and travel time impacts: An optimization-based approach'. International Journal of Sustainable Transportation 14 (5) :361-374.Available Online  
Galvin M; Lenihan B; Popovici E; Doorley R; Pakrashi V; Ghosh B (2020) 'Estimating environmental exposure of cyclists in Cork using limited sensing capabilities'. Proceedings of the Institution of Civil Engineers: Urban Design and Planning 173 (2) :62-73.Available Online  
O'Byrne M; Ghosh B; Schoefs F; Pakrashi V (2020) 'Applications of virtual data in subsea inspections'. Journal of Marine Science and Engineering 8 (5) Available Online  
O'Donnell D; Murphy J; Pakrashi V (2020) 'Damage monitoring of a catenary moored spar platform for renewable energy devices'. Energies 13 (14) Available Online  
O'Kelly-Lynch P; Long C; McAuliffe FD; Murphy J; Pakrashi V (2020) 'Structural design implications of combining a point absorber with a wind turbine monopile for the east and west coast of Ireland'. Renewable and Sustainable Energy Reviews 119 Available Online  
O'Leary K; Pakrashi V; Kelliher D (2019) 'Optimization of composite material tower for offshore wind turbine structures'. Renewable Energy 140 :928-942.Available Online  
Srbinovski B; Temko A; Leahy P; Pakrashi V; Popovici E (2020) 'Gaussian mixture models for site-specific wind turbine power curves'. Proceedings of the Institution of Mechanical Engineers, Part A: Journal of Power and Energy  Available Online  
Tripura T; Bhowmik B; Pakrashi V; Hazra B (2020) 'Real-time damage detection of degrading systems'. Structural Health Monitoring 19 (3) :810-837.Available Online  
Assoc Professor Nikolaos Papakostas
Papakostas N; Newell A; George A (2020) 'An agent-based decision support platform for additive manufacturing applications'. Applied Sciences (Switzerland) 10 (14) Available Online  
Dr Dong Quan
Quan D; Bologna F; Scarselli G; Ivankovic A; Murphy N (2020) 'Interlaminar fracture toughness of aerospace-grade carbon fibre reinforced plastics interleaved with thermoplastic veils'. Composites Part A: Applied Science and Manufacturing 128 Available Online  
Quan D; Mischo C; Li X; Scarselli G; Ivanković A; Murphy N (2019) 'Improving the electrical conductivity and fracture toughness of carbon fibre/epoxy composites by interleaving MWCNT-doped thermoplastic veils'. Composites Science and Technology 182 Available Online  
Dr Mohammad Saffari
Mangina E; Narasimhan PK; Saffari M; Vlachos I (2020) 'Data analytics for sustainable global supply chains'. Journal of Cleaner Production 255 Available Online  
Professor Kenneth Stanton
Flanagan J; Schütze P; Dunne C; Twomey B; Stanton KT (2020) 'Use of a blast coating process to promote adhesion between aluminium surfaces for the automotive industry'. Journal of Adhesion 96 (6) :580-601.Available Online  
Gorman CM; de Faoite D; Flannery D; Ratajczak M; Kelly T; Stanton KT (2019) 'Alteration of the intaglio surface of lithium disilicate glass-ceramic'. Journal of Prosthetic Dentistry 122 (4) :4110-4110000000000.Available Online  
Ruane RA; Doherty KAJ; Dorrepaal R; Twomey B; Gowen A; Flanagan J; de Faoite D; Stanton KT (2019) 'Hyperspectral imaging with unsupervised pattern recognition: A novel surface characterization technique for thermal control coatings'. Materials Letters 254 :273-277.Available Online  
Ms Antonia Trotta
Trotta A; Ní Annaidh A (2019) 'Mechanical characterisation of human and porcine scalp tissue at dynamic strain rates'. Journal of the Mechanical Behavior of Biomedical Materials 100 Available Online  
Mr Barry Twomey
Flanagan J; Schütze P; Dunne C; Twomey B; Stanton KT (2020) 'Use of a blast coating process to promote adhesion between aluminium surfaces for the automotive industry'. Journal of Adhesion 96 (6) :580-601.Available Online  
Ruane RA; Doherty KAJ; Dorrepaal R; Twomey B; Gowen A; Flanagan J; de Faoite D; Stanton KT (2019) 'Hyperspectral imaging with unsupervised pattern recognition: A novel surface characterization technique for thermal control coatings'. Materials Letters 254 :273-277.Available Online  
Dr Wenkun Xie
Xie W; Fang F (2019) 'Cutting-Based Single Atomic Layer Removal Mechanism of Monocrystalline Copper: Atomic Sizing Effect'. Nanomanufacturing and Metrology 2 (4) :241-252.Available Online  
Xie W; Fang F (2020) 'Effect of tool edge radius on material removal mechanism in atomic and close-to-atomic scale cutting'. Applied Surface Science 504 Available Online  
Xie W; Fang F (2020) 'Mechanism of atomic and close-to-atomic scale cutting of monocrystalline copper'. Applied Surface Science 503 Available Online  
Xie W; Fang F (2020) 'On the mechanism of dislocation-dominated chip formation in cutting-based single atomic layer removal of monocrystalline copper'. International Journal of Advanced Manufacturing Technology 108 (43987) :1587-1599.Available Online  
Xie W; Fang F (2020) 'Rake angle effect in cutting-based single atomic layer removal'. Journal of Manufacturing Processes 56 :280-294.Available Online  
Dr Nan Zhang
Hou J; Zhang H; Zhang N; Fang F (2020) 'Characterization of manufacturability of microstructures for micro-injection moulding of micro devices using star patterns'. Journal of Micromechanics and Microengineering 30 (2) Available Online  
Zhang H; Fang F; Gilchrist MD; Zhang N (2019) 'Precision replication of micro features using micro injection moulding: Process simulation and validation'. Materials and Design 177 Available Online  
Zhang H; Zhang N; Fang F (2020) 'Fabrication of high-performance nickel/graphene oxide composite coatings using ultrasonic-assisted electrodeposition'. Ultrasonics Sonochemistry 62 Available Online  
Zhang N; Liu J; Zhang H; Kent NJ; Diamond D; Gilchrist MD (2019) '3D printing of metallic microstructured mould using selective laser melting for injection moulding of plastic microfluidic devices'. Micromachines 10 (9) Available Online  

Back to Top

Conference Publications

Dr Philip Cardiff
Keenahan J; Zhang Y; Cardiff P (2020) A Numerical Study of the Effect of Wind Barriers on Traffic and the Bridge Deck  In: Civil Engineering Research in Ireland, Cork, IrelandAvailable Online  
Dr Mert Celikin
Nicolosi M; Guo B; Pekguleryuz M; Celikin M (2020) The Effect of Plastic Deformation on the Precipitation Hardening Behavior of Biodegradable Mg–Sr–Ca–Zn Based Alloys  In: Minerals, Metals and Materials Series, Available Online  
Dr Daithi De Faoite
Doyle M; Gloster A; O'Toole C; Mangan J; Dunwoody R; Thompson J (2020) Assembly Integration and Verification Activities for a 2U CubeSat EIRSAT-1  In: 3rd Symposium on Space Educational Activities, Available Online  
Dr Mattia De Rosa
Bampoulas A; Saffari M; Pallonetto F; De Rosa M; Mangina E; Finn D (2019) Quantification and characterization of energy flexibility in the residential building sector  In: 16th IBPSA International Conference & Exhibition Building Simulation 2019,  
Finn D; De Rosa M (2019) ICPSE 2019 Preface  In: 2019 8th International Conference on Power Science and Engineering, ICPSE 2019, Available Online  
Professor Fengzhou Fang
Uhlmann E; Fang F; Polte J; Hein C; Lai M; Dörr M; Jahnke C (2020) Tool wear prevention in ultra-precision polymer machining  In: Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020, Available Online  
Yu N; Mainaud Durand H; Liu J; Fang F (2020) Development of an ultrasonic vibration cutting system for stavax mould machining  In: Proceedings of the 20th International Conference of the European Society for Precision Engineering and Nanotechnology, EUSPEN 2020, Available Online  
Zhang H; Fang F; Zhang L; Yan Z (2020) Optical design of laser scanning vehicle AR-HUD with curve imaging surface  In: Proceedings of SPIE - The International Society for Optical Engineering, Available Online  
Assoc Professor Donal Finn
Bampoulas A; Saffari M; Pallonetto F; De Rosa M; Mangina E; Finn D (2019) Quantification and characterization of energy flexibility in the residential building sector  In: 16th IBPSA International Conference & Exhibition Building Simulation 2019,  
Finn D; De Rosa M (2019) ICPSE 2019 Preface  In: 2019 8th International Conference on Power Science and Engineering, ICPSE 2019, Available Online  
Kathirgamanathan A; De Rosa M; Mangina E; Finn D (2020) DATA-DRIVEN PREDICTIVE CONTROL FOR COMMERCIAL BUILDINGS WITH MULTIPLE ENERGY FLEXIBILITY SOURCES  In: 2020 Building Performance Modeling Conference and SimBuild, Chicago, USA  
Dr Vincent Hargaden
Papakostas N; Hargaden V; Schukraft S; Freitag M (2019) An approach to designing supply chain networks considering the occurrence of disruptive events  In: IFAC-PapersOnLine, Available Online  
Dr Hugo Lhachemi
Mannion A; Lhachemi H; Russo G; Sweeney S; Shorten R (2019) On the design of cyber-physical control system for a smart pedelec (Ebike)  In: Proceedings of the IEEE Conference on Decision and Control, Available Online  
Assoc Professor Aisling Ní Annaidh
O'Brien C; Ni Annaidh A; Trotta A (2019) IDENTIFICATION OF IN-VIVO SKIN MECHANICAL PROPERTIES (VISCOELASTICITY AND ANISOTROPY) AND RESIDUAL STRESSES  In: IRISH JOURNAL OF MEDICAL SCIENCE, Available Online  
Dr Kevin Nolan
Hsu CH; Lin HY; Agarwal A; Davis I; Nolan KP; Lua KB (2020) The performance of an acoustic levitator  In: Journal of Physics: Conference Series, Available Online  
Assoc Professor Eoin O'Cearbhaill
Levey R; Coulter F; Robinson S; Deotti S; Monaghan M; Dockery P; Dolan E; Prendergast J; Bellavia G; Straino S (2020) ADDITIVE MANUFACTURED MULTISCALE POROUS COATINGS ON MACROENCAPSULATION DEVICES MODULATE THE HOST RESPONSE  In: DIABETES TECHNOLOGY & THERAPEUTICS, Available Online  
Dr James O'Donnell
Ali U; Shamsi MH; Nabeel M; Hoare C; Alshehri F; Mangina E; Odonnell J (2019) Comparative analysis of prediction algorithms for building energy usage prediction at an urban scale  In: Journal of Physics: Conference Series, Available Online  
O.Brien S; O'Connor and Associates TJ; O'Donnell J (2019) A Quantitative Investigation into how Building Information Modelling has Affected the Transfer of Information on Construction Projects  In: CITA BIM Gathering 2019, Galway, Ireland  
Assoc Professor Vikram Pakrashi
Gonzalez-Sopena JM; Pakrashi V; Ghosh B (2020) Multi-step ahead wind power forecasting for Ireland using an ensemble of VMD-ELM models  In: 2020 31st Irish Signals and Systems Conference, ISSC 2020, Available Online  
Hale TM; Doorley R; O'byrne M; Rittgers G; Pakrashi V; Ghosh B (2019) How Do Passing Events Influence the Perception of Risk Among Cyclists  In: 2019 IEEE Intelligent Transportation Systems Conference, ITSC 2019, Available Online  
Okosun F; Pakrashi V (2020) Experimental validation of a piezoelectric measuring chain for monitoring structural dynamics  In: I2MTC 2020 - International Instrumentation and Measurement Technology Conference, Proceedings, Available Online  
Assoc Professor Nikolaos Papakostas
Papakostas N; Hargaden V; Schukraft S; Freitag M (2019) An approach to designing supply chain networks considering the occurrence of disruptive events  In: IFAC-PapersOnLine, Available Online  
Dr Mohammad Saffari
Bampoulas A; Saffari M; Pallonetto F; De Rosa M; Mangina E; Finn D (2019) Quantification and characterization of energy flexibility in the residential building sector  In: 16th IBPSA International Conference & Exhibition Building Simulation 2019,  
Mangina E; Narasimhan PK; Saffari M; Vlachos I (2020) Optimising Supply Chain Logistics System Using Data Analytics Techniques  In: Lecture Notes of the Institute for Computer Sciences, Social-Informatics and Telecommunications Engineering, LNICST, Available Online  

Back to Top